100 likes | 238 Views
Worked Examples. Practical Op-Amp Design Schmitt Trigger Precision Rectifier. Transient analysis waveform (sine wave, 0V offset, 1.38V amplitude, 1kHz). a.c. analysis magnitude. Independent voltage source. Non-Inverting Amplifier. Microcap Demo. TC-OPAMP1.CIR. Schmitt Trigger Design.
E N D
Worked Examples • Practical Op-Amp Design • Schmitt Trigger • Precision Rectifier
Transient analysis waveform (sine wave, 0V offset, 1.38V amplitude, 1kHz) a.c. analysis magnitude Independent voltage source Non-Inverting Amplifier
Microcap Demo TC-OPAMP1.CIR
Schmitt Trigger Design • Design an inverting Schmitt trigger with the following specification: • Supply voltages = +9V and 0V • Saturation levels = 0.5V and 8.5V • Switching thresholds = 6V and 7V
(1) • (2) (2) – (1)
Equivalent if: • Open-circuit voltages are the same • Short-circuit currents are the same
Microcap Demo TC-OPAMP1A.CIR
Precision Rectifier Microcap Demo TC-OPAMP2.CIR
Summary: Examinable Op-Amp Stuff • Analysis • Amplifiers: gain, cut-off frequency, in/out impedances, full-power bandwidth etc. • Comparators: switching level(s), effects of slew rate etc., oscillator circuit, applications. • Precision Rectifier: waveforms, slew rate limiting etc. • Design • Amplifiers, comparators, oscillators.