The Characteristics of Lightweight Stone Honeycomb Panels for Strength and Beauty

1. The Characteristics of Lightweight Stone Honeycomb Panels for Strength and Beauty Stone honeycomb panels provide effectual sound insulation, protection from moisture, cold resistance, and heat insulation because of their hollow honeycomb core structure. Natural stone, such as granite, marble, limestone, or onyx can be bonded on top of the honeycomb panel, resulting in an aesthetically pleasing architectural feature that is durable and lightweight. Knowing the characteristics of the stone honeycomb panel can help you decide if it’s the best material for your project. Here’s an overview of its qualities. Composition High-qualitystone honeycomb panelsconsist of a 3mm porcelain slab or a 6mm natural stone veneer on top, with aluminum honeycomb panels as the backing for reinforcement. This backing is bonded to the top veneer with a specially formulated epoxy adhesive from internationally renowned brands to guarantee a strong bond, even in extreme conditions. The panels can withstand temperature changes ranging from -40 degrees to 80 degrees Celsius. They are also proven to reach 2.0Mpa in a tensile test and are guaranteed to last over 100 years with natural degradation. Lightweight A stone honeycomb panel is an ideal material for exterior cladding for its ultra- lightweight quality. The panels weigh only one-third of thick slabs of solid stone, so they significantly lessen the dead load of the entire facade, resulting in savings. Large format Being lightweight with a larger format also enables faster installation. You could installstone honeycomb panelsaround three times faster than solid stone materials, meaning lower installation costs and quicker turnaround. Versatile

2. Many upscale residential and commercial projects opt for high-value stones for a touch of luxury to the property. The stone honeycomb panel is a versatile material you can use for interior stone works, and it helps cut costs for sourcing stone slabs as cutting them in half as one slab makes them suitable for two panels. And although they’re calledstone honeycomb panels, they are also compatible with artificial materials, such as glass, ceramic, porcelain, and engineered stone. High-quality fabrication Most of the fabrication process can be completed in the factory, resulting in high-quality results compared to when it’s done at the job site. That also means savings as it eliminates the need to perform excessive onsite work.