330 likes | 444 Views
INTRODUCTION TO THE WORK HEALTH AND SAFETY REGULATIONS IMPLICATIONS FOR SMALL BUSINESS . WHAT HAS CHANGED?. Work Health and Safety Act will replace the NSW OHS Act Work Health and Safety Regulations will replace the current NSW OHS Regulation
E N D
INTRODUCTION TO THE WORK HEALTH AND SAFETY REGULATIONS IMPLICATIONS FOR SMALL BUSINESS
WHAT HAS CHANGED? • Work Health and Safety Act will replace the NSW OHS Act • Work Health and Safety Regulations will replace the current NSW OHS Regulation • A set of national Codes of Practice will gradually be introduced • For most workplaces the new WHS Regulations will be very similar to the current OHS Regulation
Managing Risks • Must identify and eliminate or control risks • Musteliminaterisks and if not reasonably practicable minimise risks • Risks unable to be eliminated must be controlled through a hierarchy of control • Risk assessment is not mandatory in most cases – outcome focused
Managing Risks • Must maintain and reviewrisk control measures • HSRs can request a review of a control measure in certain circumstances • Where specific controls are outlined in the WHS Regulations they must be followed (e.g. controls for hazardous chemicals or noise)
Training, Information and Instruction • Must be suitable and reflect: • The nature of the work carried out by the worker • Thenature of the risks associated with the work • Thecontrol measures implemented
Consultation and Representation • WHS Act includes key requirements • WHS Regulations: • Outlines the factors in determining work groups • Specifies HSR training details • Code of Practiceprovides • further guidance
Issue Resolution Procedure must take into account: • the degree and immediacy of riskto workers or other persons involved in the issue; • the number and location of workers and other persons affected by the issue; • the measures(both temporary and permanent) that must be implemented to resolve the issue; • who will be responsible for implementing the resolution measures
Facilities Must provide facilities including toilets, drinking water, washing and eating facilitiesrelevant to: • The nature of the work • The hazardsin the workplace • The size, location and nature of the workplace • The number and composition of workers
Personal Protective Equipment • Must be appropriate to the activity and hazard • Must be a suitable size and fit and maintained and replacedas required • Workers must be informed and trained on PPE use
First Aid • Must provide accessibleFirst Aid equipment and facilities • Ensure adequate numbers of workers are trainedor haveaccess to others who are trained • First Aid arrangements must take into account • The nature of the work • The hazards in the workplace • The size, location and nature of the workplace • The number and composition of workers (and others) 13
Emergency Plan • Must include proceduresfor rapid response, evacuation, notification, medical assistance and communication • Must inform workersof procedures • Must be testedin line with plan schedules • Emergency plan must take into account • The nature of the work • The hazards in the workplace • The size, location and nature of the workplace • The number and composition of workers (and others)
Falls • Manage the risk of a fall by a person from one level to another by: • Ensuring so far as is reasonably practicable that any work that involves the risk of a fall is carried out on the ground or on a solid construction • Providing safe access to and exit from the workplace or any area within the workplace with the risk of a fall
Falls • If not reasonably practicable to eliminate the risk of falling then minimise the risk by providing adequate protectionsuch as (in order): • Providing a fall prevention device or • Providing a work positioning system, or • Providing a fall arrest system
Hazardous Manual Tasks • Take into account risk factors including: • Postures, force, duration and frequency • Workplace environmentalconditions, design and layout of workplace • Systems of workused • Nature, size, weight and numberof persons, animals or things involved in the hazardous manual task
Remote or Isolated Work • Must manage risks to the health and safety of a worker associated with remote or isolated work • Must provide a system of work that includes effective communication with the worker
Noise • Ensure that a worker is not exposed to noise levels above the exposure standard • Provide audiometric testingif the worker is frequently required to use hearing protection to reduce exposure to noise and in combination with other factors
Airborne Contaminants • Must ensure exposure standard for a substance or mixture is not exceeded • Must undertake atmospheric monitoringof contaminants in certain circumstances • Must keep records and make accessible to those exposed to contaminants
Hazardous Atmospheres • Must manage risks associated with hazardous atmospheres • Must manage risks associated with an ignition source in a hazardous atmosphere • Must ensure that flammable or combustible substances are kept at the lowest practicable quantity
Falling Objects • Must manage risks of falling objects if reasonably likely to injure a person • If not possible to eliminate risk then minimiserisks to health and safety by: • Preventing free fall of objects • Arrestingfree fall of object (e.g. barriers, safe means of lowering objects)
Some things may appear to be missing Welding Abrasive blasting GENERAL DUTIES Licensing for load shifting equipment Spray Painting • Some construction hazards • e.g.: overhead protective structures, structural collapse, lowering of materials Certificates of competency for pest controllers Identification and Management of Risk What is reasonably practicable - state of knowledge
Codes of Practice WHS Regulation
Transitional arrangements and WorkCover NSW Codes