1 / 17

LTE Cell Trace and UE Trace Handling

LTE Cell Trace and UE Trace Handling. Cell Trace. The Cell trace feature collects events/traces for a group of cells. It collects all events related to the cell relations for that cell and for the entire RBS.

keaton-mcintyre
Download Presentation

LTE Cell Trace and UE Trace Handling

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LTE Cell Trace and UE Trace Handling

  2. Cell Trace • The Cell trace feature collects events/traces for a group of cells. It collects all events related to the cell relations for that cell and for the entire RBS. • The Cell trace is the most common form of general troubleshooting within the network. It is possible to analyze overall performance of the network seeing patterns and trends within a large group of cells/RBSs. OSS-RC Activate Trace Enodeb Upload trace file in OSS Enodeb CellTrace Enodeb Cell Trace

  3. Activating Cell Trace Start LTE GUI measurement

  4. Add CTR Profile Select LTE Cell Trace Profiles tab. Right click to add profile and select LTE Cell Trace recording profile

  5. Specify Details for the Cell Trace Event 1 3 Define Cell Trace name Select Enodeb from list 2 Select all sectors in the EnodeB or specific sector 4 Select Output Mode as file. Streaming option is available but is still under testing by AT&T HQ

  6. Event and UE fraction Select the Events to be captured. Select UE Fraction – 1000 enables traces for ALL UEs camped on that cell for each 15 minute ROP

  7. Duration of Trace Define duration of the trace

  8. Activating Trace Profile Right click on the Cell Trace Name and select Resume Profile

  9. Verify Trace Status Admin State and Op State of Profile should be active after resuming profile

  10. Reading Cell Trace In OSS Common Explorer select Network Status Perspective. Search for the Cell where the trace was active and under the View tab you can select Traffic Recordings View.

  11. Decoding Messages Select the Cell Trace File, then the message type and the properties tab will show more details

  12. UE Trace • The UE Trace feature is designed to allow the tracking of a single UE in the network by means of a global identifier e.g. IMSI or IMEI. • Each UE trace generates an event during a ROP 15 minutes period will create its own file in the OSS with the trace reference in the name of the file. • There can be up to 16 simultaneous UE traces for one RBS. • 256 simultaneous traces are supported by the OSS-RC.

  13. Add UETR Profile Select LTE UE Trace Profiles tab. Right click to add profile and select LTE UE Trace recording profile

  14. select UETR events subscription profile name and comment pane Profile Schedule Wizard enter IMSI number Specify Details for the UE Trace Event

  15. Activating UETR Profile • Activation of UETR Profile is the same process as in the Activation of the CTR Profile

  16. Reading UE Trace In OSS Common Explorer select Network Status Perspective. Select the root directory for LTE and all traces will show up. Select UETR Trace Reference and Messages to view details of UE Trace

  17. QUESTIONS & COMMENTS

More Related