1 / 27

Big Lake Regional Model

Big Lake Regional Model. In-Class Task Script CE En 547 Brigham Young University. 1. Download, unzip, and open file. May want to save as a different name. 2. Set Units. 3. Create a MODFLOW Conceptual Model. 4 . Create a boundary coverage using three arcs. 4. cont. (use three arcs).

kedma
Download Presentation

Big Lake Regional Model

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Big LakeRegional Model In-Class Task Script CE En 547 Brigham Young University

  2. 1. Download, unzip, and open file May want to save as a different name.

  3. 2. Set Units

  4. 3. Create a MODFLOW Conceptual Model

  5. 4. Create a boundary coverage using three arcs.

  6. 4. cont. (use three arcs)

  7. 5. Duplicate boundary coverage to create source/sink coverage Double-click

  8. 6. Create Spec Head Boundary Multi-select and right-click

  9. 6. Continued

  10. 7. Create river arcs.

  11. 7a. Mark as rivers and assign conductance

  12. 7b. Assign Stage and RBOT Or double-click Repeat for all nodes

  13. 8. Create general head boundary for lake.

  14. 9. Create Wells Create in order

  15. 10. Duplicate boundary to build k coverage.

  16. 10. Create K polygons

  17. 10. Build polygons, assign K Repeat

  18. 11. Make recharge-elev coverage

  19. 11. Build Poly, assign values

  20. 12. Create Grid Frame

  21. 13. Build Grid

  22. 14. Initialize MODFLOW

  23. 15. Activate Cells in Coverage

  24. 16. Map -> MODFLOW

  25. 17. Assign Starting Heads

  26. 18. Run the Model Checker

  27. 19. Save and run the model

More Related