1 / 8

8” MCP Flow for 8/7/2012

8” MCP Flow for 8/7/2012. - 13600-002 and -003 coated at Fermi and returned to ANL on 8/3/12 13600-048 and -050 packed and ready for Fermi courier to pick up 8/8/12 13600-077 and -078 still at Fermi.

kendall-jefferson
Download Presentation

8” MCP Flow for 8/7/2012

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 8” MCP Flowfor 8/7/2012 • - 13600-002 and -003 coated at Fermi and returned to ANL on 8/3/12 • 13600-048 and -050 packed and ready for Fermi courier to pick up 8/8/12 • 13600-077 and -078 still at Fermi

  2. Mock-up of ass’y using transporter #30 bottom piece, spring, spacer, 3 additional spacers (to approximate transporter top piece) and MCP 13600-099 that hade been received damaged. SPRING

  3. Unable to move the MCP at all in the transporter until screws were loosened by about ½ turn.

  4. Removed the spacers leaving only the spring above the MCP, and used this hand-held 8x magnifier to inspect.

  5. The crack in this MCP (13600-099) follows an edge of the relief cut in the spring.

  6. MCP 13600-099 measures 8.003” x 8.003”, thickness measures .045”to .050”. The opening in the transporter measures 8.014” x 8.014”. • All springs at ANL were inspected to see if any had a rough inside edge toward the MCP side. Most were smooth on both sides, and the few that were somewhat rough were rough toward the spacer side. Dowel holes prevent flipping this piece over. • Incom has seen these photos and has been kept in the loop on this. • Jason is investigating redesign of the spring.

  7. 13600-090 was cracked in 2 corners (bottom right and top right) and each of these appears to also have occurred along the relief in the spring.

  8. Uncertain as to what happened to the 3rd damaged MCP shown below. This was damaged in diagonally opposite corners and had chips broken off the edge, not a crack extending in from the edge. May be a different root cause. 13600-096 from Transporter 35

More Related