1 / 4

Our customer want That operate only red box

We did set “Bypass” in Digital Mixer Block Also, Enable NCO, Input frequency. Is right??. Our customer want That operate only red box. answer. Yes, this is correct. The mixer path need to be set to bypass to bypass all the coarse mixers.

kendall
Download Presentation

Our customer want That operate only red box

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. We did set “Bypass” in Digital Mixer Block Also, Enable NCO, Input frequency. Is right?? Our customer want That operate only red box

  2. answer • Yes, this is correct. The mixer path need to be set to bypass to bypass all the coarse mixers. • The NCO is used to provide fine numerical oscillator frequency. Complex mixer is needed along with the NCO to provide complex upconversion.

  3. When set Mixer in Digital Mixer Block, two register is displayed. • 0x0D : OK. I understood • 0x10 : When change Mixer function in every time, Should we set to 0x00 this register? 0x0D: CMIX mode should be programmed if one of the coarse mixers need to be used. 0x10, bit 13:12 need to be fixed at “11” for DAC3482 mode (dual DACs). If DAC3484 mode is needed, please set the two bits to ‘00’. This two bits should be programmed as fixed value throughout the operation.

More Related