1 / 34

Polyesters

Polyesters. Brent Strong. Polyesters (Unsaturated). The most common type of resin for composites The least expensive composite resin The easiest-to-cure composite resin Polyesters are made from two types of monomers: Di-acids Glycols. Polyester polymerization. Monomers. A. Acids A

kenley
Download Presentation

Polyesters

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Polyesters Brent Strong

  2. Polyesters (Unsaturated) • The most common type of resin for composites • The least expensive composite resin • The easiest-to-cure composite resin • Polyesters are made from two types of monomers: • Di-acids • Glycols

  3. Polyester polymerization Monomers A Acids A (di-acids) G Glycols G (di-alcohols) A G A G Polyester polymer A G A

  4. Polyester polymerizationn • Di-acids have active OH groups on both ends • Glycols have active H groups on both ends • One end of the di-acid (the OH group) reacts with one end of the glycol (the H group) to form water (H−OH) • The water separates from the polymer and condenses out as a liquid • These type of polymerization reactions are called condensation reactions

  5. Polyesters polymerization HO G OH Glycol HO-G HO G OH Glycol G G Glycol Glycol

  6. Customizing the Polyester − Acids

  7. Customizing the Polyester− Glycols

  8. Customizing the Polyester− Solvents

  9. Customizing the Polyester− Adding Other Monomers or Resins

  10. Polyesters − specific molecules RepeatingUnit n The number of repeating units is usually shown by an n

  11. Polyesters − crosslinking (curing) C C C C Unsaturated portion Polyesters must have unsaturated portions to crosslink

  12. Initiators (catalysts) • Initiators are sometimes called catalysts. • The crosslinking reaction is begun when an initiator reacts with the double bond. • The most common initiators are peroxides. • The peroxides are effective initiators because they split into free radicals (that is, they have unshared electrons) which react easily with the double bonds. • Free radicals have unshared electrons.

  13. Polyesters − crosslinking (curing) I Initiator ● C C C C

  14. Polyesters − crosslinking (curing) I C ● C ● C ● C

  15. Polyesters − crosslinking (curing) Bond (2 electrons) I C C C C ● Unshared electron

  16. Polyesters − crosslinking (curing) I C C C C * Free radical (unshared (unbonded) electron) Free radicals react readily with any Carbon-carbon double bond they encounter

  17. Polyesters − Reaction Problem • To react and form a crosslink, the free radical on the polymer needs to encounter (collide with) a double bond on another polymer • The polymers are long and entangled (highly viscous), thus they don’t move very quickly • The polymers are bulky and it is hard to get the free radical into the area of the double bond • The chances of lining up just right are not good

  18. Polyesters − Reaction Solution • Dissolve (dilute) the polymer with a solvent so that the polymers can move around freely • Ideally, the solvent will react during the crosslinking reaction so that it does not need to be removed from the solid • These types of solvents are called “reactive solvents” or “reactive diluents” or “co-reactants” • Added benefit: • The solvent will also reduce the viscosity so that the polymer will wet the fibers more easily

  19. Styrene • Styrene is the most common solvent for polyesters • The styrene reacts (is consumed) during the crosslinking reaction because the styrene contains a double bond and reacts with the free radical • The styrene serves as a bridge molecule between the polymer chains (as part of the crosslink) • There may be as many as 8 styrene molecules in a bridge

  20. Polyester − forming the crosslink I C C C C Styrene New bonds (crosslink) C C C C * New free radical The styrene is a bridge molecule between the polyester polymers The new free radical is available to react with another styrene

  21. Crosslinking Reaction • Called addition or free radical crosslinking reaction • Proceeds as a chain reaction • Once started, it will keep going unless specifically terminated • Doesn’t need more initiator • Makes its own reactive sites

  22. Continuing and Terminating • Once started, each free radical-based reaction will continue until the new free radical site stops colliding with double bonds • Runs out of reactive diluent • Stops encountering other polymers with double bonds • Perhaps because the polymers get so long they don’t move much (the polymer becomes a rigid solid) • Post-curing can induce some movement in solids and increase the amount of crosslinking • The free radical site might cease to exist • React with another growing chain’s free radical site • React with another free radical in the solution • From an initiator (danger of adding too much initiator) • From ozone (using wax to help exclude air)

  23. Inhibitors • Inhibitors are added, usually by the resin manufacturer, to slow down the crosslinking reaction • Inhibitors typically absorb free radicals • Inhibitors protect the polymer during storage because sunlight, heat, contaminants, etc. can start the curing reaction • Molders must add sufficient initiator to overcome the inhibitors and to cause the crosslinking to occur

  24. Promotors (accelerators) • Added to the polymer to make the initiator work more efficiently or at a lower temperature • Each type of peroxide has a temperature at which it will break apart into free radicals • These temperatures are usually above room temperature • For room temperature curing, a chemical method for breaking apart peroxides is needed • The most common promoters (accelerators) are cobalt compounds and analines (DMA) • Never add a promoter directly into an initiator

  25. Additives • Additives are components (usually minor) that have various functions that are not related to the curing reaction • The most common types of additives are: • Fillers (to lower cost and/or give stiffness) • Thixotropes (to control viscosity) • Pigments • Fire retardants • Surfactants (to promote surface wetting) • UV inhibitors/Anti-oxidants

  26. Factors influencing cure • Mix ratios • Resin, initiator, inhibitor, accelerator, solvent • Fillers, pigments, other additives • Storage time after activation • Thickness of the part • Cure time • Humidity • Temperature

  27. Thermal effects • The rate (speed) of chemical reactions increases as the temperature is increased • Arrhenius equation: exponential relationship between rate and temperature • Rate roughly doubles for each 10°C rise • Molecular collisions are required • Heat increases molecular movement • Highly reactive entities (like free radicals) have successful reactions with almost every collision • Some reactions create heat (exothermic)

  28. Time-Temperature Curve in the sample at constant applied temperature 149 300 93 200 oC oF Temperature 100 38 15 0 5 10 Time, min

  29. Temperature-Viscosity Curve Gel Point Solids Liquid-Solid Line Viscosity Region B Region A Liquids Thinning due to temperature Crosslinking Time/Temperature Combination (What is seen)

  30. Thickness-Exotherm Curve Heat Buildup Thickness Heat builds up because of the poor thermal conductivity of polymers

  31. Peroxide content – Temperature and Time Curves 150 310 140 290 130 270 Peak Exotherm, oC °F 120 0.5% cobalt naphthenate 250 110 230 100 210 2.0 0.5 1.0 0 1.5 % methyl ethyl ketone peroxide (MEKP)

  32. Accelerator Content − Time Curve 300 250 Gel Time, Min At 0.25% MEKP 200 150 100 At 0.50% MEKP 50 .004 .008 .012 .016 .020 % Cobalt Naphthenate

  33. Polyesters

  34. Thank you A. Brent Strong

More Related