1 / 21

A Cobalt Solvent Extraction Investigation in Africa’s Copper Belt

A Cobalt Solvent Extraction Investigation in Africa’s Copper Belt. Tanja Könighofer. Premium-Grade Co-Metal Specification. Premium Grade Co Metal = $34/lb (August 2008). CoEW Electrolyte Composition. A Co-Circuit Flowsheet. Testwork Objectives.

kenna
Download Presentation

A Cobalt Solvent Extraction Investigation in Africa’s Copper Belt

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. A Cobalt Solvent Extraction Investigation in Africa’s Copper Belt Tanja Könighofer

  2. Premium-Grade Co-Metal Specification Premium Grade Co Metal = $34/lb (August 2008)

  3. CoEW Electrolyte Composition

  4. A Co-Circuit Flowsheet

  5. Testwork Objectives • Produce a raffinate stream containing <10mg/L cobalt in order to minimise cobalt losses. • Limit the amount of magnesium, reporting to the cobalt electrowinning circuit to less than 5% of that contained in the feed to the cobalt solvent-extraction circuit. • Test pre-neutralisation with 10M NaOH. • Determine the zinc build-up within the cobalt solvent extraction strip circuit.

  6. Theory 2AH+ + M2+A2Mn2+ + 2H+ A represents R2P(O)O- Overbar represents a species in the organic phase. . R2P(O)OH(org)+NaOH(aq)R2P(O)ONa(org)+H2O(aq)

  7. Order of Metal Extraction of Cyanex 272 vs pH • Fe3+>Zn2+>Al3+>Cu2+>Mn2+>Co2+>Mg2+>Ca2+>Ni2+.

  8. Extraction Isotherm with McCabe-Thiele Plot 1 2 3 4

  9. Stripping Isotherm versus McCabe-Thiele Plot 1 2 3

  10. CoSX Circuit

  11. Co & Mg Extraction efficiencies & pH in final extraction stage 100% Co Extraction Co Slippage

  12. [Mg] in aqueous phase in extraction circuit

  13. [Mg] in the organic phase Strip Scrub Extraction

  14. Mg scrubbing efficiency • < 5% Mg reporting to strip circuit achievable in 3 stages • < 5% Mg reporting to strip circuit achievable in 1 stage, if Mg loading in extraction is limited

  15. [Co] in organic phase of E1 & final scrub stage 1 Scrub stage 3 Scrub stages

  16. [Zn] in S1 pH = 3.5

  17. [Zn] in S3 [H2SO4] = 8 to 9g/L

  18. Conclusions & Recommendations • Extraction • 18% (v/v) Cyanex 272 in aliphatic diluent • 4 Stages using 40g/L NaOH for pH control • 1 pre-neutralisation stage using 10M NaOH • Increase pH profile in extraction using pre-neutralisation • [Co] < 10mg/L in Raffinate • 99% Co extraction efficiency • pH profile of 4.9 in E1 and 5.7 in E4 • Phase ratio = 1.0 • Mg scrubbing enhanced by decreased pH profile from E4 to E1

  19. Conclusions and Recommendations • Scrubbing • Scrub liquor = advance electrolyte (55g/L Co) • O:A = 40 • < 5% Mg from feed reports to loaded strip liquor using 3 stages • < 5% Mg from feed reports to loaded strip liquor using 1 stage if co-extraction limited in extraction • 68% and 39% scrubbing achieved in 3 and 1 stages respectively • Recommend 2 stages be employed and optimised on full-scale plat

  20. Conclusions and Recommendations • Stripping • Strip liquor = spent electrolyte (55g/L Co, 8-9g/L H2SO4) • O:A = 0.67 • 100% Co stripping achieved in 3 stages when pH in S1 between 3.5 and 4.0 • pH control in S1 by addition of 30g/L H2SO4 • Zn accumulation, possible contamination of Co metal • Slip in pH • Recommend controlled periodic stripping of organic at low pH – strip liquor recycled to upstream unit operations

  21. Thank you

More Related