1 / 12

CEN4500 Experiment 2: Bluetooth Device Discovery and Analysis

CEN4500 Experiment 2: Bluetooth Device Discovery and Analysis. Dr. Ahmed Helmy Introduced by Sungwook Moon Jeeyoung Kim Wei-jen Hsu. Outline. Introduction of the lab 2 Bluetooth device discovery Brain-storming questions. Logistics. Lab2:

kenriquez
Download Presentation

CEN4500 Experiment 2: Bluetooth Device Discovery and Analysis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CEN4500 Experiment 2: Bluetooth Device Discovery and Analysis Dr. Ahmed Helmy Introduced by Sungwook Moon Jeeyoung Kim Wei-jen Hsu

  2. Outline • Introduction of the lab 2 • Bluetooth device discovery • Brain-storming questions

  3. Logistics • Lab2: • Part I: encounter discovery (2/25 – 3/7) • Part II: submit a report by noon on 3/27 to the lab • This presentation slides and the lab manual will be available on the course website. • We will distribute PDAs you use for the lab today. The encounter discovery starts right away.

  4. Delay Tolerant Networks (DTN) • Performance-challenged networks where continuous end-to-end connectivity cannot be assumed.

  5. Objectives of this lab • To understand (through hands-on experience) what are the patterns of the existing communication opportunities via short-range radio (Bluetooth). • To brain-storm about how we could utilize this encounter information in DTNs.

  6. Encounter • If a device is within a radio-range, we call it an encounter. • In our experiment, Bluetooth discovery means an encounter.

  7. Part I: Bluetooth Discovery • Each person will be given an iPAQ PDA with a program called BlueChat. BlueChat logs other Bluetooth devices in radio range. • Carry this iPAQ PDA with BlueChat program running all the time. • It is OK to play with this PDA but please be careful not to remove any of files. • Return the device on Mar 7 to the lab (CSE 401).

  8. Part I: Bluetooth Discovery (BlueChat)

  9. Part I: Bluetooth Discovery • BlueChat characteristics: • displays the ID and MAC address of discovered Bluetooth devices. • scans every 20 seconds, however, it may not display some of devices that pass by quickly. • refreshes every 3 min., clears the devices displayed and may not display any devices for 20-30 sec. • If a battery runs out, a timer might be set to 2005 (Windows mobile 5.0 drawback), so be careful not to drain the battery.

  10. Part I: Bluetooth Discovery • Check to make sure Bluetooth is enabled. You can turn this on/off in the setting -> connection. • If a battery runs out, a timer might be set to 2005 (Windows mobile 5.0 bug), so be careful not to drain the battery.

  11. Part II: Brain-storming • Collected trace will be uploaded to the course website. Download and analyze it according to the questions given on the lab manual. • Each group should submit a report by noon on Mar 27 to the lab. • Details about the report will be up on the website in the following week.

  12. Q&A • You are always welcomed to come to the lab for questions.

More Related