1 / 16

Suspended Load

Suspended Load Above certain critical shear stress conditions, sediment particles are maintained in suspension by the exchange of momentum from the fluid to the particle. To predict the flux of suspended sediment, we need: velocity profile sediment concentration profile.

kenton
Download Presentation

Suspended Load

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Suspended Load Above certain critical shear stress conditions, sediment particles are maintained in suspension by the exchange of momentum from the fluid to the particle. To predict the flux of suspended sediment, we need: velocity profile sediment concentration profile

  2. Threshold for suspension: Suspension occurs under high shear stress flows, when turbulent fluctuations in the vertical velocity of the flow (w’) are as strong, or stronger than the settling velocity of sediment (Ws). The vertical velocity fluctuations scale with the mean velocity and thus the friction velocity of the flow [w’ (0.8 to 1.0) x u*], so the criteria for incipient suspension is Ws  u*. Rouse Parameter, P, defines the ratio of settling velocity to vertical fluctuations:

  3. no suspension, “stream weak” - bedload incipient suspension full suspension, “stream strong” - suspended load • When compared to the threshold of motion criteria, it is seen that, for fine-grained sediment (D < 63 - 88 m) the suspension threshold is less restrictive than that for the transport threshold. • Silts & Clays will be suspended as soon as they become mobile, and will not tend to be transported as bedload. • Some flows have transport capacity, but can not resuspend.

  4. Zone 1: Shear stress sufficient to erode the bed. • Shear stress sufficient for significant suspended load transport. • Zone 2: Shear stress not sufficient for erosion. • Shear stress sufficient for suspended load maintenance. • Zone 3: Shear stress not sufficient for erosion. • Transport along bottom maintained as bedload. • Material placed in suspension at higher shear stress levels could move into the bedload layer. • Zone 4: Shear stress not sufficient to resuspend or maintain in suspension any suspended load.

  5. Conservation of Mass for Suspended Sediment Full equation: Where us, vs, ws are the components of sediment velocity Assume: steady state uniform flow in horizontal Next remember that the flow is turbulent, and we can treat the mean and fluctuating components separately.

  6. Conservation of suspended sediment for steady, uniform flow becomes: Time-averaging:

  7. Vertical sediment velocity = Ws (time-averaged) and can be pulled out of the differential: Eddy Diffusivity for Mass: We can use the same gradient diffusion argument as we did for the mixing of momentum: In analogy, for sediment:

  8. Integrating .. Need a form for the eddy diffusivity for mass (Ks)

  9. Solve for the concentration profile: where P is the Rouse parameter (P = Ws/u*) and za is the reference height where concentration, ca, can be specified.

  10. Notes: For a grain-size distribution of sediment, calculate profile for each size, then add together. To get profiles that are valid throughout a thicker region of the bottom boundary layer, different values of the eddy diffusivity must be used. At high concentrations, conservation of mass should be rewritten to take both water mass and sediment mass into account.

  11. Rouse Parameter: • if P is high: • if P is low: • Where do we position “a” • top of bedload layer ~ 2D • practically - 1-2 cm above bed z C z C

  12. Holding the grain size constant: very fine sand, D = 0.1 mm ca = 1 at a = 2 cm at higher u*, more sediment in water column at lower u*, turbulent diffusion can’t support sediment grains

  13. Holding the shear velocity constant: u* = 2 cm/s ca = 1 at a = 2 cm finer grain sizes distributed throughout bottom boundary layer coarser sizes suspended only very near bed.

  14. We still need to know the concentration at a reference elevation (ca) to compute the concentration profile. Reference height can be a location at which you have some idea of concentration from data or from theory. Yalin - proposed that, near the bed at steady state, concentrations should increase with excess shear stress, cs is proportional to S = Smith & McLean - proposed that za be taken at the top of the bedload layer (which they related to zo) and formed the relationship:

  15. Where cb is the concentration of the bed ca is taken at zo o is the “resuspension parameter”, in sands 2.4 x 10-3 (Smith & McLean) experimental values have been shown to range : 1.6 x 10-5 5.4 x 10-3

More Related