1 / 8

Home Automation APP Configure Instruction

Configure your smart home with the U_Home P2P V1.3 app for direct connection to the indoor monitor. Follow the step-by-step instructions to set up port forwarding, remote control, and video surveillance. Download link: http://url.cn/25I15Cm.

khatcher
Download Presentation

Home Automation APP Configure Instruction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Home Automation APP Configure Instruction

  2. System Profile The Smart Home P2P APP with the direct connection to the indoor monitor (Gateway) Mobile APP U_Home P2P V1.3 Download Link: Indoor Monitor (With Fixed IP Address) http://url.cn/25I15Cm Indoor Monitor Optional (Android OS)

  3. Port Forwarding for the Indoor Monitor 1. Connect the indoor monitor to internet by RJ45 Cable or by Wifi. 2. Setting the IP address of the indoor monitor with fixed local IP. (e.g. 192.168.11.86) 3. Enter the router setting, and setting the Port Forwarding for the Indoor monitor IP, with the port 7800.

  4. Enable the remote control and surveillance 1. Enter the setting menu, and choose the Security Setting with the default password: 1234. 2. Enable the Allow remote appliance control. 3. Enable the Allow remote video surveillance. 4. the default Remote Password is: 1234

  5. App Interface (Demo) Support the local Network IP address (eg. 192.168.11.86) Login with the demo IP address: 221.4.214.12 Password: 1234 Choose the Room for control Select the device of the room to control e.g. Curtain Control

  6. Smarthome App Demo App Interface (Demo) e.g. Air Conditioner control Select the Scene for control Select the IP Camera to Monitor Add new or Modify the IP Camera

  7. Port Forwarding for the Indoor Monitor 1. Enter the setting menu, and choose the Project Setting with default password 123456. 2. Enter the advanced setting menu, setting the video port e.g. 8800 (the APP video port setting as same). 3. Setting the video type by MPEG4, if the APP can not get the video stream. Monitoring interface (APP)

  8. THANK YOU!

More Related