1 / 70

Circular Motion and Gravitation

Angular Measure, Angular Speed, and Angular Velocity. Circular Motion and Gravitation.

kiet
Download Presentation

Circular Motion and Gravitation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Angular Measure, Angular Speed, and Angular Velocity Circular Motion and Gravitation

  2. 1. A tube is been placed upon the 1 m-high table and shaped into a three-quarters circle. A golf ball is pushed into the tube at one end at high speed. The ball rolls through the tube and exits at the opposite end. Describe the path of the golf ball as it exits the tube. 2. If the 50g golf ball leaves the tube with a velocity of 32 m/s at 45o, a) what is it’s maximum height, b) how long does it take to land, and c) what is the impulse force the ground exerts on the ball to bring it to a stop in 98 μs? Bellwork

  3. An arc of a circle is a "portion" of the circumference of the circle. The length of an arc is simply the length of its "portion" of the circumference.  Actually, the circumference itself can be considered an arc length. The length of an arc (or arc length) is traditionally symbolized by s. The radian measure of a central angle of a circle is defined as the ratio of the length of the arc the angle subtends, s, divided by the radius of the circle, r. Algebra 2 Review

  4. Relationship between Degrees and Radians: When the arc length equals an entire circumference, we can use s = θr to get 2πr= θr and 2π = θ. This implies that 2π = 360o So and Algebra 2 review, cont. To change from degrees to radians,multiply by To change from radians to degrees,multiply by

  5. Convert 50º to radians. Convert π/6 radians to degrees. How long is the arc subtended by an angle of 7π/4 radians on a circle of radius 20.000 cm? Example Problems Answers: 5π/18 radians 30 degrees 109.96 cm

  6. Circular motion is described using polar coordinates, (r, q) x=rcosq and y = rsinq, where q is measured counterclockwise (ccw) from the positive x-axis. Angle is defined as q = s/r, where s is the arc length, r is the radius, and q is the angle in radians. Also expressed as s=rq Angular distance, Δ =  - o is measured in degrees or radians. A radian is the angle that subtends an arc length that is equal to the radius (s=r) 1 rad = 57.3o , or 2rad = 360o Angular Measure

  7. When you are watching the NASCAR Daytona 500, the 5.5 m long race car subtends an angle of 0.31o . What is the distance from the race car to you? Example 1

  8. Solution to example 1

  9. When moving in a circle, an object traverses a distance around the perimeter of the circle The distance of one complete cycle around the perimeter of a circle is known as the circumference This relationship between the circumference of a circle, the time to complete one cycle around the circle, and the speed of the object is merely an extension of the average speed equation Uniform circular motion is the motion of an object in a circle with a constant or uniform speed.

  10. The circumference of any circle can be computed using from the radius according to the equation relating the speed of an object moving in uniform circular motion to the radius of the circle and the time to make one cycle around the circle (period, T), where R=radius: Combining Kinematics and circular measurement to calculate speed Circumference = 2*pi*Radius

  11. Instantaneous angular speed is the magnitude of the instantaneous angular velocity Tangential (linear) speed and angular speed are related to each other through where r is the radius. The time it takes for an object to go through one revolution is called the period, T. Then number of revolutions in one second is called the frequency, f Angular speed and velocity

  12. Velocity, being a vector, has both a magnitude and a direction Since an object is moving in a circle, its direction is continuously changing direction of the velocity vector is tangential to the circular path The Direction of the Velocity Vector

  13. A bicycle wheel rotates uniformly through 2.0 revolutions in 4.0 s. • What is the angular speed of the wheel? • What is the tangential speed of a point 0.10 m from the center of the wheel? • What is the period? • What is the frequency? Example 2

  14. an accelerating object is an object which is changing its velocity. a change in either the magnitude or the direction constitutes a change in the velocity. an object moving in a circle at constant speed is accelerating because the direction of the velocity vector is changing. Acceleration

  15. The acceleration of the object is in the same direction as the velocity change vector • Objects moving in circles at a constant speed accelerate towards the center of the circle. Change in Velocity

  16. The linear tangential velocity vector changes direction as the object moves along the circle. This acceleration is called centripetal acceleration (center-seeking) because it is always directed toward the center of the circle. The magnitude of centripetal acceleration is given by Centripetal Acceleration

  17. From Newton’s Second Law, we conclude that there MUST be a net force associated with centripetal acceleration. Centripetal force is always directed toward the center of the circle since the net force on an object is in the same direction as acceleration. Centripetal Force

  18. A car of mass 1500 kg is negotiating a flat circular curve of radius 50 m with a speed of 20 m/s. • What is the source of the centripetal force on the car? Explain • What is the magnitude of the centripetal acceleration of the car? • What is the magnitude of the centripetal force on the car? • What is the minimum coefficient of static friction between the car and the curve? Example 3

  19. Convert the following angles from degrees to radians or from radians to degrees, to two significant figures. • -285o • 195o • -90o • -4/3 π • -270o • -3/4 π • 165o • π/3 Warm-up

  20. -285o • 195o • -90o • -4/3 π • -270o • -3/4 π • 165o • π/3 • -5 rad or 1.6 π • 3.4 rad or 1.08 π • -1.6 rad or π/2 rad • -240o or4/3 πrad • -4.7 rad or 3/2 πrad • -135o or 3/4 π rad • 2.9 rad or 0.92 πrad • 60o or π/3 rad Convert the following angles from degrees to radians or from radians to degrees, to two significant figures.

  21. Given: f = 0.5 Hz Solve: T = 1/f T= 1/0.5 Hz T= 2 s Example 4: After closing a deal with a client, Kent leans back in his swivel chair and spins around with a frequency of 0.5 Hz. What is kent’s period of spin?

  22. The record makes 45 revolutions every minute (60 s), so T = 60 s/45 rev. = 1.3 s r = 12 cm v = 2πr/T = 2π(12cm)/1.3s = 58 cm/s Example 5: Curtis’ favorite disco record has a scratch 12 cm from the center that makes the record skip 45 times each minute. What is the linear speed of the scratch as it turns?

  23. Given: r = 4.0 m, T = 2.0s v=2pir/T = 2pi(4.0m)/2.0s = 13 m/s ac = v2/r = 132/4.0 m = 42 m/s2 Example 6: Missy’s favorite ride at the Topsfield Fair is the rotor , which has a radius of 4.0 m. The ride takes 2.0 s to make on e full revolution.A) What is Missy’s linear speed on the rotor?B) What is Missy’s centripetal Acceleration on the rotor?

  24. In order to have an acceleration, there MUST be a force What provides that force? The Cause of Centripetal Force Tension Applied Force Friction Spring Force Gravitational Force

  25. What happens When the Force Vanishes?

  26. The speed at which the object moves depends on the mass of the object and the tension in the cord The centripetal force is supplied by the tension Motion in a Horizontal Circle

  27. The object is in equilibrium in the vertical direction and undergoes uniform circular motion in the horizontal direction v is independent of m Circular Motion about a Conical Pendulum

  28. The force of static friction supplies the centripetal force The maximum speed at which the car can negotiate the curve is Horizontal (flat) Curve

  29. There is a component of the normal force that supplies the centripetal force Banked Curve

  30. From the frame of the passenger (b), a force appears to push her toward the door From the frame of the Earth, the car applies a leftward force on the passenger The outward force is often called a centrifugal force It is a fictitious force due to the acceleration associated with the car’s change in direction Fictional Forces

  31. Centrifugal, not to be confused with centripetal, means away from the center or outward. Circular motion leaves the moving person with the sensation of being thrown OUTWARD from the center of the circle rather than INWARD It’s really just inertia! http://www.physicsclassroom.com/mmedia/circmot/cf.cfm The Great Misconception

  32. Although fictitious forces are not real forces, they can have real effects Examples: Objects in the car do slide You feel pushed to the outside of a rotating platform The Coriolis force is responsible for the rotation of weather systems and ocean currents Effects of “Pretend” Forces

  33. At the bottom of the loop, the upward force experienced by the object is greater than it’s weight Centripetal Force Vector ADDS to Normal Force Vector Loop – The – Loop – A Vertical Circle

  34. At the top of the circle, the force exerted on the object is less than its weight Centripetal Force Vector TAKES AWAY from the normal force Loop – The – Loop

  35. Warm-up: Captain Chip, the pilot of a 60500 kg jet plane, is told he must remain in a holding pattern over the airport until it is his turn to land. If Captain Chip flies his plane in a circle whose radius is 50.0 km once every 30.0 min, what centripetal force must the air exert against the wings to keep the plane moving in a circle?

  36. Many racetracks have banked turns, which allow the cars to travel faster around the curves than if the curves were flat. Actually, cars could also make turns on these banked curves if there were no friction at all. Use a free body diagram to explain how this is possible. Example 7.45

  37. An indy car with a speed of 120 km/hr goes around a level, circular track with a radius of 1.00 km. What is the centripetal acceleration of the car?   • 1.11 m/s2 • 0.555 m/s2 • 3.49 m/s2 • 7.54 m/s2 . Example 7.46

  38. A car with a constant speed of 83.0 km/hr enters a circular flat curve with a radius of curvature of 0.400 km. If the friction between the road and the car’s tires can supply a centripetal acceleration of 1.25 m/s2 does the car negotiate the curve safely? Justify your answer. Yes No Example 7.52

  39. A student is to swing a bucket of water in a vertical circle without spilling any (Fig. 7.29). (a) Use a free body diagram to help explain how this task is possible (what provides the centripetal force?). (b) If the distance from his shoulder to the center of mass of the bucket of water is 1.0 m, what is the minimum speed required to keep the water from coming out of the bucket at the top of the swing? Example 7.53

  40. For a scene in a movie, a stunt driver drives a 1.50 x 103 kg SUV with a length of 4.25 m around a circular curve with a radius of curvature of 0.333 km (Fig. 7.31). The vehicle is to be driven off the edge of a gully 10.0 m wide, and land on the other side 2.96 m below the initial side. What is the minimum centripetal acceleration the truck must have in going around the circular curve to clear the gully and land on the other side?   Example 7.58

  41. Given Info: m = 55.0 kg v = 16.1 m/s r = 22.6 m Find: a = ??? Angle of lean = ??? Bellwork: Bonnie is ice skating at the Olympic games. She is making a sharp turn with a radius of 22.6 m and with a speed of 16.1 m/s. Use Newton's second law to determine the acceleration and the angle of lean of Bonnie's 55.0-kg body.

  42. ac = v2/R a = (16.1 m/s)2/(22.6 m) = 11.5 m/s2 Fx = Fnet = m•a Fx = (55.0 kg)•(11.5 m/s/s) = 631 N Solution to Bellwork

  43. Angular acceleration = the rate of change of angular velocity Angular Acceleration: Non-Uniform Circular Motion

  44. A CD accelerates uniformly from rest to its operational speed of 500 rpm in 3.50 s. • What is the angular acceleration of the CD during this time? • What is the angular velocity of the CD after this time? The angular acceleration after this time? • If the CD comes uniformly to a stop in 4.50 s, what is its angular acceleration during that part of the motion? Example 8: A rotating CD

  45. A. B. C. D. 1. What could the positionand velocity vectors for the lady bug look like?

  46. A. B. C. D. 2. What could the accelerationand velocity vectors look like?

More Related