70 likes | 75 Views
Passing NS0-515 exam will enhance your skills in NetApp Certified Implementation Engineer-SAN Specialist area and can help you get the professional career you want. Candidates who successfully get through NetApp NS0-515 exam prepared wisely and chose a right preparation material.Killtest NS0-515 practice exam assures 100% success with the most reliable PDF file and testing engine.Before getting your valid NS0-515 exam questions, we suggest you read Free Demo NS0-515 NetApp Practice Exam V8.02 first.You will find that Killtest NS0-515 practice exam questions are vaulable.
E N D
The safer , easier way to help you pass any IT exams. 1.You are setting-up asynchronous mirroring between two E2860 systems In this scenario, which two prerequisites are required to complete the setup? (choose two) A. both the primary and secondary systems must be using the same subnets for mirroring connections B. The secondary system must have 2X the storage capacity of the primary system C. Both systems must be discovered by an Enterprise Management Window (EMW) or SANtricity Unified Manager D. Both the primary and secondary systems must have the same premium features licensed Answer: CD 2.An orphaned volume occurs during an asynchronous mirror implementation. You must recover the orphaned volume. In this scenario, which statement is correct? A. Deactive the mirror consistency group that contains the orphan then re-enable the group B. Perform a role change on the orphan then re-create the mirroring relationship C. Remove the mirroring relationship on the orphan then re-create the mirroring relationship D. Suspend mirroring operations on the orphan then resume operations Answer: C 3.Which file contains the configuration for a multipath driver for FC on Linux systems? A. /opt/multipath/multipath.cnf B. /etc/multipath.conf C. /etc/dm-multipath.conf D. /etc/kernel/mp.conf Answer: B 4.What does the CHAP secret accomplish for an E-Series system? A. Ethernet management authentication B. SAS authentication C. FC authentication D. iSCSI authentication Answer: D 5.Click the exhibit button. Referring to the exhibit, which three statements are true? (Choose three) A. There are two FC/iSCSI host ports available B. There are two SAS expansion ports available C. There are four SAS host ports available 2 / 6
The safer , easier way to help you pass any IT exams. D. There are six SAS host ports available E. There are two Base-T iSCSI ports available Answer: ABC 6.The Netapp E-Series system with a 32 Gb FC Host Interface Card (HIC) requires which type of fiber cable to connect to switches or to connect directly to hosts extending up to 100 meters? A. OM4 B. OM3 C. OM2 D. OM1 Answer: B Explanation: https://library.netapp.com/ecmdocs/ECMLP2589397/html/GUID-E07F426A-2C4A-4E27-98B6- 2EC1866EBB62.html 7.What are two methods for setting the host protocol configuration on the E2800 controller with a 4-port 16Gbps FC or 10Gbps iSCSI SFP+ host interface card (HIC)? (Choose two) A. Change the feature pack in the SANtricity System Manager. B. Set in the hardware tab using SANtricity System Manager C. Set at the factory based on the order. D. Change the QSFP type in the HIC Answer: AD 8.Which three documents should be provided to the customer after the e-Series installation is complete? (choose three.) A. a document showing how much space is available for system expansion B. a b a document with IMT pages that show the supported host configuration and fabric switches in the solution C. a document showing available power on the UPS with no equipment connected D. a document showing the cabinet layout with cabling information and IP addresses being used E. a document showing user IDs and passwords for all deployed devices Answer: BDE 9.An E2812 system, without expansion shelves, is configured with 12 Gb SAS host interface cards (HICS) and is directly connected to a host. However, the host cannot access the volumes. 3 / 6
The safer , easier way to help you pass any IT exams. In this scenario, which two troubleshooting steps should you take? (Choose two) A. Verify that the E2812 host port SAS link up lights are illuminated B. Verify that the E2812 SAS CHAP secret is set. C. Verify that the correct SAS ports are in use on the E2812 system D. Verify that the host can ping the E2812 system over the SAS link Answer: AC 10.To enable one-way authentication in a new iSCSI Linux implementation, which three modifications should you make in the /etc/iscsi/iscsi.conf file on the Linux host? (Choose three.) A. the initiator username and password B. sendtargets discovery C. CHAP D. iSCSI E. the target username and password Answer: BCE 11.An administrator is asked to migrate two DE6600 shelves into a newly deployed E5760 environment that is configured with a stack of two DE460C shelves. In this scenario, how does the administrator complete this task? A. Cable the DE6600s into a separate stack B. Cable the DE6600s between the DE460C shelves C. Cable the DE6600s at the beginning of the stack D. Cable the DE6600s at the end of the stack Answer: A 12.A company wants the most scalable host-side connection topology for E-Series systems. In this scenario, which FC topology would satisfy the requirement? A. fabric attach B. arbitrated loop C. direct connect D. private loop Answer: A 13.Which two errors would fail a pre-upgrade health check? (choose two.) A. Volumes are reported on a non-preferred path B. I/O is being processed C. An excess number of event log events are present D. Hot spares are in use Answer: CD 14.A company implemented Automatic Load Balancing (ALB). When the controller workloads are monitored, it becomes obvious that there is an imbalance and that ALB is not working correctly. In this scenario, what are two causes of the problem? (Choose two) A. The company implemented an adaptive load balancing agent that does not support ALB. 4 / 6
The safer , easier way to help you pass any IT exams. B. The company implemented a load balancing min-min algorithm that does not support ALB. C. The company implemented a host multipath driver that does not support ALB. D. The company implemented a host type that does not support ALB. Answer: CD 15.Which data protection strategy has the most overhead capacity as a percentage of the total capacity? A. Dynamic Disk Pools (DDP) B. RAID 6 C. RAID 5 D. RAID 10 Answer: C 16.Which two steps are required to enable multifactor authentication on an E-Series system? (Choose two) A. Test SSO login B. Configure LDAP C. Map roles D. Configure In-Band Management Answer: BC 17.Click the exhibit button. An administrator is asked to create a 5532 GiB volume from the volume group. Referring to the exhibit how would the administrator complete this request? A. Create the volume after consolidating the capacity B. Create the volume after adjusting the preservation capacity C. Create the volume from the available capacity D. Create the volume after performing space reclamation Answer: A 18.In which two locations would you find the WWPNs for a Windows host? (Choose two) A. host's BIOS B. HBA vendor's utility C. FC switch D. Windows Device Manager Answer: BC 19.Which three factors should you consider before you install an E2860 in a data center? (Choose three) 5 / 6
The safer , easier way to help you pass any IT exams. A. current draw B. electromagnetic interference C. heat dissipation D. ambient temperatures E. fire suppression capacity Answer: ACD 20.When a drive fails in a Dynamic Disk Pool (DDP) with no free capacity, what happens to the data? A. It is evacuated to the preservation capacity within the DDP. B. It is evacuated to a hot spare drive that is assigned to the DDP. C. It is rebuilt using preservation capacity within the DDP. D. It is rebuilt using the on-board backup database Answer: C 21.Click the exhibit button. You ordered a NetApp E2812 Duplex 16GB 10GbE Base-T system. Referring to the exhibit, what is the maximum number of 10GbE Base-T ports available to be used? A. 6 B. 8 C. 4 D. 12 Answer: B 6 / 6