Real H31-341-ENU Questions HCIP-Transmission Exam V10.02 Killtest

1. Huawei HCIP-Transmission 2020 H31-341 Exam Questions HCIP-Transmission V2.0

2. Which of the following description of the extended ECC is correct? (Multiple Choice) A. Extended ECC recommends to use manual basis, which reduces mutual negotiation between network elements. B. The scale of the extended ECC network (the sum of the server and the client) must not exceed 8. C. Extended ECC is divided into automatic extended ECC and manual extended ECC. One network element can only support one mode at the same time. These two methods cannot be directly docked. D. In the automatic extended ECC mode, you need to connect the Ethernet ports of the two NEs with a direct-connected network cable (or a standard network cable through B), extend the ECC, and specify the server and client. Answer: ABC

3. Which of the following operating modes does the AT8 board support? (Multiple Choice) A. Reverse 2E2M B. 2E2M C. 1E1M D. Reverse 1E1M Answer: ABC

4. The main application scenarios for board compatible replacement are (). (Multiple Choice) A. Expanding the board B. Change the board ID C. Change the board IP D. Replacement board Answer: ABD

5. Which step is more when the the single board replacement operation of main control board single configuration than main control board double configuration? A. Download the original configuration data B. Ensure that the version of the host software is the same before and after the replacement. C. Consistency check of network management and network element data. D. Query the alarm of the board and confirm that the original alarm has been cleared. Answer: A

6. Which of the following is a good way to avoid creating discrete paths? (Multiple Choice) A. The path with the protected route is to be broken or switched. Ensure that the configuration is complete and standardized. B. Try to use the path function to configure. C. Guide users to learn business configuration specifications. D. The service of the single-station configuration should perform path search on the network to ensure that the service configuration is complete and standardized. Answer: ABCD

7. Which of the following description of discrete services is correct? (Multiple Choice) A. For the cross-connections, after a path search, either a discrete service or forming a path with other cross-connections, which is impossible to be a discrete service, and forming a path with other cross-connections. B. Perform path search on the U2000 network management. Cross-connections that do not form a path are called high-bandwidth services. C. Discrete service management requires the U2000 license to have path management functions. D. A service is searched for a discrete service, indicating that the service is not working properly on the NE side. Answer: AC

8. The length range of the DATA field in the Ethernet frame structure is (). A. 46-1500 bytes B. 46-1518 bytes C. 64-1518 bytes D. 64-1500 bytes Answer: A

9. Which of the following description of the principle of automatic protection switching of the standard SSM protocol is correct? (Multiple Choice) A. The network element broadcasts the clock quality information of the synchronization source to the downlink site through the s1 byte. And reverse notice the uplink site by the S1 byte in the direction of the synchronization source that the clock quality from the local network element is "not available for synchronization". B. If there are multiple clock sources with the highest quality level, the network element selects the clock with the highest clock priority as the synchronization source. C. According to the clock source priority table, the network element first selects the clock with the highest quality level from the available clock sources as the synchronization source. D. The network element broadcasts the clock quality information and the clock source ID of the synchronization source to the downlink site through the S1 byte, and reverse notices the uplink site that the clock quality from the local network element is "not available for synchronization" by the S1 byte in the direction of the synchronization source. Answer: ABCD

10. After the signal of the standard Ethernet frame length of 64 Bytes is connected to the Ethernet board, if the QinQ function is enabled, what is the actual frame length of the signal inside the board? A. 64 Bytes B. 84 Bytes C. 68 Bytes D. 80 Bytes Answer: C

11. Which of the following is the data that needs to be collected and saved in the event of a failure? (Multiple Choice) A. Equipment alarms and performance events B. Running status data of the NE and the board C. Operation log of the network management D. Configuration data of the NE and the board Answer: ABCD

12. Which of the following are limitations of the alarm and performance analysis methods? (Multiple Choice) A. Field maintenance personnel cannot understand the current operating condition of the equipment. B. The network administrator cannot obtain the current notifications of the device, the alarm occurrence time, and the historical alarm of the device. C. When some faults occur, there may be no obvious alarms or performance events reported, and sometimes no alarms or performance events are found. D. In the case of complex networking, service, and fault information, many alarms and performance events may occur along with the occurrence of faults. Due to too many reports and performance events, maintenance personnel are unable to analyze. Answer: CD

13. Which of the following description of the evolutionist in the mainstream SDN model in the industry is correct? (Multiple Choice) A. Control flexibility is moderate and open is not complete B. Make full use of existing equipment and achieve fast C. Device programmable, open northbound API interface D. Try to preserve and reuse existing routing protocols and IP network technologies Answer: ABCD

14. Which of the following statement about the MPLS-TP OAM level is correct? A. Section is the service layer of the tunnel, Tunnel is the service layer of the PW, and PW is the service layer of the Service. B. Section is the service layer of PW, PW is the service layer of Tunnel, and Tunnel is the service layer of Service. C. Service is the service layer of the PW, PW is the service layer of the Tunnel, and Tunnel is the service layer of the Section. D. Tunnel is the service layer of PW, PW is the service layer of Service, and Service is the service layer of Section. Answer: A

15. The transmission plane mainly performs functions such as optical signal transmission, multiplexing, configuration protection switching, and reconnection, and ensures the reliability of the transmitted optical signal. However, the exchange action of this layer is carried out under the influence of the management dry surface and the control plane. A. TRUE B. FALSE Answer: A

16. Which of the following description of the ASON software structure is correct? (Multiple Choice) A. Intelligent optical network consists of three planes B. Management plane mainly refers to upper management such as network management C. Intelligent software main application management plane D. The transmission plane refers to the traditional transmission network. Answer: ABD

17. Thank You sales@killtest.com