1 / 12

Real Platform Engineer, PowerStore DES-1241 Exam Questions V8.02 Killtest

Killtest is the best provider who helps IT personage be successful. Many people who have passed DES-1241 exam used Real Platform Engineer, PowerStore DES-1241 Exam Questions V8.02 Killtest. Killtest has a high quality, which its practice questions have 98% similarity with real examination. If you use Real Platform Engineer, PowerStore DES-1241 Exam Questions V8.02 Killtest, you can 100% pass your first time to attend IT certification exam. Killtest DES-1241 exam questions are prepared for people who participate in the DELL EMC DES-1241 exam. Killtest DES-1241 practice test include not only DES-1241 study materials which can consolidate your expertise, but also high degree of accuracy of DES-1241 exam questions about DELL EMC certification DES-1241 exam.

killtestfreedemo2020
Download Presentation

Real Platform Engineer, PowerStore DES-1241 Exam Questions V8.02 Killtest

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DELL EMC Platform Engineer Certified 2020 Real DES-1241 Exam Questions Specialist - Platform Engineer, PowerStore

  2. Which port is used to SSH from one Dell EMC PowerStore appliance to another? A. 22 B. 26 C. 443 D. 21 Answer: A

  3. During Dell EMC PowerStore startup, both appliance nodes have rebooted in service mode. What must be done first to avoid management software conflicts? A. Reboot node B B. Clear the boot mode C. Disable node B boot mode D. Return node A to normal mode Answer: D

  4. What is the last step when adding a drive to a Dell EMC PowerStore system? A. Verify the new drive is seen B. Add the drive to the pool C. Backup the keystore D. Zero the drive Answer: A

  5. A Storage Administrator needs to connect through SSH to run svc commands. How is the SSH session configured? A. Appliance IP address using port 22 B. NAS server IP address using port 26 C. NAS server IP address using port 22 D. Appliance IP address using port 26 Answer: C

  6. What describes the power requirements for Dell EMC PowerStore? A. Lower model numbered systems require less AC line current than higher model numbered systems B. T models require less total power than X models C. X models require less total power than T models D. Lower model numbered systems require less input voltage (VAC) than higher model numbered systems Answer: A

  7. Through which network do external hosts connect to the cluster for data access? A. Management B. ICM C. ICD D. Storage Answer: D

  8. A Storage Administrator is adding an appliance into an existing Dell EMC PowerStore T cluster. What is different about the management network configuration for the new appliance compared to configuring an initial appliance for the cluster? A. All the needed management IP addresses for the new appliance must be pre-configured on the cluster B. Additional appliance does not require a cluster management IP address C. Additional appliance inherits all its management IPs from the existing appliance D. All the needed management IP addresses for the new appliance are auto-generated by the cluster Answer: D

  9. What describes Dell EMC PowerStore X front-end cabling? A. Uses internal VMware virtual switching and does not require a management network B. Storage and management use the same LACP bonded cable connection C. Uses VLTi data switch interconnectivity to support vMotion networks D. Management and discovery use the same cables and connections as storage Answer: C

  10. How is a defective DIMM displayed in Dell EMC PowerStore Manager? A. Orange with an empty state B. Blue with a faulted state C. Orange with a faulted state D. Blue with an empty state Answer: C

  11. What is a step in configuring the ToR data switches for a Dell EMC PowerStore X? A. Configure a port for the discovery laptop B. Create VLANs for NAS servers C. Create node A port-channel D. Configure LACP uplink to management switch Answer: B

  12. Thank You sales@killtest.com

More Related