Updated NS0-161 Exam Guide NetApp NCDA ONTAP Certified V9.02 Killtest

2. The safer , easier way to help you pass any IT exams. 1.You want to create a FlexGroup volume that contains four aggregates with eight constituents each. In this scenario, what is the value of the aggregate list multiplier? A. 2 B. 32 C. 4 D. 8 Answer: C 2.You want to asynchronously replicate an SVM's volumes and configuration to another NetApp cluster. Which data protection technology accomplishes this task? A. SVM disaster recovery B. SnapVault C. MetroCluster D. SnapMirror Answer: A 3.What are three advantages of configuring network subnets? (Choose three.) A. The default gateway is automatically added to the SVM. B. The subnet mask is automatically set on the NAS LIF. C. The DNS zone is automatically set on the NAS LIF. D. The IP address is automatically set on the NAS LIF. E. The flow control is automatically set on the port. Answer: ABD 4.What is the maximum number of nodes in a cluster that the Cisco Nexus 5010 supports? A. 24 B. 18 C. 12 D. 20 Answer: B 5.Which aggregate type is supported for Flash Pool? A. 128-bit B. 32-bit C. Traditional D. 64 bit Answer: D 6.You want to enable jumbo frames on a NetApp storage system. Which network object would you modify to accomplish this task? A. port B. LIF C. VLAN Updated NS0-161 Exam Guide NetApp NCDA ONTAP Certified V9.02 Killtest 2 / 13

3. The safer , easier way to help you pass any IT exams. D. broadcast domain Answer: D 7.What is the maximum number of node a SAN cluster in Data ONTAP 9 can have? A. 16 B. 32 C. 1 D. 6 E. 2 F. 24 G. 8 Answer: G 8.Which three statements are true for mailbox disks per node in an HA pair? (Choose three.) A. Two disks are required if the root volume is on a disk shelf. B. Four disks are required if the root volume is on a mirrored aggregate. C. One array LUN is required if the root volume is on a storage array. D. Six disks are required if the root volume is on a mirrored aggregate. E. Eight disks are required if the root volume is on partitioned disks. Answer: BCE 9.What is an array LUN? A. a LUN provisioned in ONTAP that is mounted by a connected host B. a LUN that is used only as a part of a volume group C. a LUN provisioned on third-party storage that ONTAP will use in a RAID group D. a LUN provisioned on third-party storage that ONTAP will use as a passthrough LUN Answer: C 10.What is the compression group size for adaptive compression? A. The group size is always 32k, regardless of the workload. B. The group size is always 8k, regardless of the workload. C. The group size is determined based upon the workload. Updated NS0-161 Exam Guide NetApp NCDA ONTAP Certified V9.02 Killtest D. The group size is always 4k, regardless of the workload. Answer: C 11.Which NetApp tool is used to perform a configuration validation and health check that includes a highavailability setup? A. SnapCenter B. Inventory Collect Tool C. Hardware Universe D. Config Advisor Answer: D 3 / 13

4. The safer , easier way to help you pass any IT exams. 12.A storage administrator moves a LUN from one volume to another In this scenario, what is left behind in the volume? A. clones of the LUN B. Snapshot copies of the volume C. LUN geometry settings D. all of the deduplicated blocks from the base LUN Answer: D 13.You must create a CIFS share for a replicated destination volume for read-only access to the files. In this scenario, which task must be completed before you create the share? A. Change permissions. B. Mount the volume. C. Break the replication. D. Set up the preferred domain controller. Answer: B 14.You use the Automated Workload Analyzer (AWA) to identify workloads that would benefit from which feature? A. FabricPooI capacity tier B. storage efficiency C. Flash Pool aggregates D. Advanced Disk Partitioning Answer: C 15.For NDMP to be aware of a vserver, what actions needs to be taken? (choose three) A. NDMP service enabled B. NDMP scope listed C. Data management application D. Cluster-aware backup Answer: ACD 16.Which two NFS versions are supported on clustered Data ONTAP 9? Updated NS0-161 Exam Guide NetApp NCDA ONTAP Certified V9.02 Killtest (Choose two.) A. NFSv4 B. NFSv2 C. NFSv1 D. NFSv3 Answer: AD 17.What is the maximum number of nodes a NAS cluster can have? A. 16 B. 1 C. 2 4 / 13

5. The safer , easier way to help you pass any IT exams. D. 24 E. 4 F. 8 G. 32 Answer: D 18.A customer has an aggregate, aggr1_01 with three RAID groups: rg0, rg1, and rg2. Each RAID group has 15 disks, and the aggregate’s maximum RAID group size is set to 18 disks. The customer adds three additional disks to the aggregate using the following command: storage aggregate add-disks –aggregate aggr1_01 –diskcount 3 How are the RAID groups affected by this command? A. The three disks are added to RAID group rg0. B. Each RAID group receives one additional disk. C. The three disks are added to RAID group rg2. D. The disks are added to a new RAID group rg3. Answer: C 19.Exhibit: Updated NS0-161 Exam Guide NetApp NCDA ONTAP Certified V9.02 Killtest 20.What is a characteristic of a single-node cluster? A. It is unsupported in a production environment. B. It does not have any cluster interconnect LIFs. C. It does not have a node management LIF. D. It only hosts a single SVM. Answer: B 21.Which logical interface does not have migration nor failover migration capabilities? A. node management B. data C. target On the first LUN entry shown in the exhibit, a hyphen (-) appears under reporting-nodes. What are two reasons why the hyphen appears? (Choose two.) A. The hyphen is the default for SLM on LUNs create before ONTAP 8.3. B. The hyphen is the default for SLM on LUNs create in ONTAP 8.3 and later. C. The hyphen indicates that all nodes are reporting paths to the LUN. D. The hyphen indicates that no nodes are reporting paths to the LUN. Answer: BC 5 / 13

6. The safer , easier way to help you pass any IT exams. D. cluster management Answer: A 22.What should an administrator do first before shutting down two nodes of a 4-node cluster? A. Migrate node-management LIFs to a node that is staying up B. Reassign the master of all RDB rings to a node that is staying up C. Set both nodes that are coming down to "ineligible" D. Move Vserver root volumes to a node that is staying up Answer: C 23.You are replacing a FAS system that has several DS4243 disk shelves. The new system is an AFF A300. You want to reuse the DS4243 disk shelves with your new AFF A300. In this situation, which NetApp tool would you use to confirm if the task is possible? A. Config Advisor B. Active IQ C. Interoperability Matrix Tool (IMT) D. Hardware Universe Answer: D 24.You have a cluster with a node running root data partitioning and need to grow the aggregate for additional data volumes. What is NetApp’s best practice for increasing the aggregate size to optimize performance? A. Add a complete RAID group at a time. B. Add 16 disks to the aggregate. C. Add two disks to an existing RAID group. D. Create a new aggregate and migrate all data with vol move. Answer: A 25.What are two capabilities of Vserver setup? (Choose two) A. It configures an existing Vserver B. It licenses Vserver functionality C. it creates a new Vserver that can host FCP LUNs. Updated NS0-161 Exam Guide NetApp NCDA ONTAP Certified V9.02 Killtest D. It creates a new cluster Vservers E. It joins an exisiting Vserver to the cluster. Answer: AD 26.Which two statements are true when you restore a volume from a Snapshot copy? (Choose two.) A. All data that was written to the volume after the Snapshot copy was created is lost. B. After the volume is restored, it becomes read-only. C. All Snapshot copies that were created after the Snapshot copy was created are lost. D. The volume’s SnapMirror relationships need to be re-created. Answer: AD 6 / 13

7. The safer , easier way to help you pass any IT exams. 27.Exhibit: Updated NS0-161 Exam Guide NetApp NCDA ONTAP Certified V9.02 Killtest A. A FlexGroup volume is created with eight constituents. B. A FlexGroup volume is created with two constituents C. A FlexVol volume is created on the aggregate (sas_01 or sas_02) with the most free space. D. A FlexVol volume is created on aggregate sas_01 can only be moved to aggregate sas_02. Answer: B 30.Exhibit: You execute the cluster1::> network ipspace showcommand, and notice that two IPspaces are not able to be renamed or deleted. Referring to the exhibit, what are these two IPspaces? (Choose two.) A. IPspace2 B. IPspace1 C. Cluster D. Default Answer: CD 28.Which statement is true about expanding an aggregate from 32-bit to 64-bit in place? A. The expansion is triggered by adding disks to exceed 16 TB. B. All aggregates are automatically converted from 32-bit to 64-bit with the Data ONTAP 8.1 upgrade. C. The 32-bit aggregates are degraded and must be Volume SnapMirrored to a new 64-bit aggregates with Data ONTAP 8.1 upgrade. D. The expansion is triggered by an aggr convert command. Answer: A 29.Exhibit: You create a volume as shown in the exhibit. Which statement about the new volume is true? 7 / 13

8. The safer , easier way to help you pass any IT exams. Updated NS0-161 Exam Guide NetApp NCDA ONTAP Certified V9.02 Killtest You have a Windows 10 computer that lost an SMB drive mapping that used the IP address of your SVM. The mapping was working until security requirements disabled NTLM authentication. Windows Server 2019 servers remained connected to the drive mapping. Referring to the exhibit, what is the reason for this problem? A. DNS is not enabled. B. Kerberos requires the server name. C. SMBv3 is required. D. The cluster clock is incorrect by more than 3 minutes. Answer: B 31.A volume is created named vs2_vol2 on aggregate netappu-02. It is mounted in the vs2 namespace at /vs2/vol2. Volume move moves this volume to the netappu-01 aggregate. What is the path to this volume after the move? A. /netappu-01/vs2/vs2_vol2 B. /vs2/vol2 C. /vol/vs2/vs2_vol2 D. /vol/vs2_vol2 Answer: B 32.You are provisioning a LUN for a new host. In this scenario, which three objects must exist? (Choose three.) A. igroup B. volume C. LUN D. export policy E. interface group Answer: ABC 8 / 13

9. The safer , easier way to help you pass any IT exams. 33.Which NetApp cluster configuration requires the use of epsilon? A. a 4-node cluster B. a singe-node cluster C. a 2-node cluster D. a cluster with an odd number of nodes Answer: A 34.When you deduplicate a thick-provisioned volume, in which area will you see space savings when using a df command? A. aggregate B. volume C. node D. cluster Answer: B 35.An administrator is configuring an aggregate to use FabricPool to take advantage of auto tiering. In this scenario, what are three requirements to accomplish this task? (Choose three.) A. AFF array B. volume with space-guarantee volume C. intercluster LIFs D. FabricPool license E. volume with space-guarantee none Answer: ACD 36.Which FabricPool policy would you apply only on a SnapMirror destination volume? A. auto B. backup C. manual D. destination Answer: B 37.An SVM is configured to authenticate SVM administrators with the access method set to Password. A Updated NS0-161 Exam Guide NetApp NCDA ONTAP Certified V9.02 Killtest computer account for the SVM exists on the Active Directory domain controller. You are now required to authenticate administrators trough domain. Which two steps are required to accomplish this task? (Choose two.) A. Re-create the computer account for the SVM on the domain. B. Configure the SVM as a tunnel to the domain. C. Create a login account on the cluster for the domain users with an access method of 'domain' D. Create a custom role for all users who belong to the domain Answer: BC 38.A customer’s Linux Oracle database requires a SAN solution with multiple FC connections for path 9 / 13

10. The safer , easier way to help you pass any IT exams. resiliency and performance. The host has been provisioned with two dual-port FC HBAs, and each HBA is connected to each fabric. Before configuring the storage, what host information should the storage administrator obtain from the customer? (Choose two.) A. if the DM-MP with ALUA support is configured on the host B. the WWPNs of all of the FC ports in the host C. if the FC HBAs ports are all configured for an active/passive configuration. D. the amount of cache memory installed in the host Answer: BD 39.Which Data ONTAP Cluster-Mode clone technology can clone an individual LUN Inside a volume without cloning the entire volume? A. LUN Clone B. Snap Clone C. Flex Clone D. Vol Clone E. Aggr Clone Answer: A 40.Exhibit: Updated NS0-161 Exam Guide NetApp NCDA ONTAP Certified V9.02 Killtest Referring to the exhibit, which two statements are true? (Choose two.) A. A default user quota is set on volume svm1_data1. B. An explicit quota is set on qtree1, and a derived quota is set on qtree2. C. A derived quota is set on qtree1, and an explicit quota is set on qtree2. D. A default tree quota is set on volume svm1_data1. Answer: CD 41.Which two LIFs are able to failover or migrate to other nodes in the cluster? 10 / 13

11. The safer , easier way to help you pass any IT exams. (Choose two.) A. cluster LIF B. data LIF of protocol CIFS C. data LIF of protocol FCoE D. data LIF of protocol iSCSI E. node management LIF F. intercluster LIF G. data LIF of protocol NFS Answer: AG 42.Exhibit: Updated NS0-161 Exam Guide NetApp NCDA ONTAP Certified V9.02 Killtest E. VServer-routes F. port G. Interface groups H. cluster-routes Answer: BFG 44.You are running out of space on an aggregate and decide to move a FlexVol volume to a different aggregate. You do not want to move the Snapshot copies with the volume. Which two actions satisfy your requirement? (Choose two.) A. Create a FlexClone volume. You use DNS zone delegation to access an SVM that is set up for on-box DNS to nfs1.netapp.com. You can ping both lif1 and lif2 by IP address, but you can only ping lif1 by the delegated DNS name nfs1.netapp.com. Referring to the exhibit, what must you do to allow on-box DNS access to lif2? A. Configure lif2 in the external DNS. B. Modify the firewall policy on lif2 to management. C. Configure the name service to allow DNS. D. Modify the DNS zone on lif2 to nfs1.netapp.com. Answer: D 43.What are the three types of resources supported by Logical interfaces? (Choose three.) A. failover groups B. VLAN C. group-routes D. cluster 11 / 13

12. The safer , easier way to help you pass any IT exams. B. Use the volume move command on the FlexCIone volume. C. Use the volume rehost command on the FlexClone volume. D. Use the storage aggregate relocation command on the node. Answer: AB 45.Which components are required to create an ONTAP Cloud HA configuration in Amazon Web Services (AWS)? A. two ONTAP Cloud nodes with an HA interconnect B. two ONTAP Cloud nodes in a single availability zone C. two ONTAP Cloud nodes and a cluster interconnect D. two ONTAP Cloud nodes, each in a separate availability zone Answer: D 46.A storage administrator currently has an 8-node FAS8200 cluster with CIFS, NFS, and iSCSI licenses installed. In this scenario, how many additional nodes are supported? A. 3 B. 1 C. 4 D. 6 Answer: C 47.From the output of the command “network interface show”, the logical interface that has a value of “false” under the “Is Home” column signifies it (choose all that apply) A. Has been migrated B. Is administratively disabled C. Is currently being migrated to home node D. Is disconnected E. Has failed over Answer: AE 48.With clustered Data ONTAP 9 or later, an administrator may use NDMP commands at which two levels? (Choose Two) A. Vserver Updated NS0-161 Exam Guide NetApp NCDA ONTAP Certified V9.02 Killtest B. Intercluster C. Cluster D. Node Answer: AD 49.On your customer's AFF A700, there are multiple volumes within the aggregate aggr1. Within aggr1, volumes vol1, vol2, and vol3 store similar data, and volumes vol4 and vol5 store unique data. In this scenario, which feature would improve storage efficiency with the data stored in volumes vol1, vol2, and vol3? A. postprocess compression 12 / 13

13. The safer , easier way to help you pass any IT exams. B. data compaction C. inline aggregate-level deduplication D. inline compression Answer: B 50.For RAID-DP root aggregates created with clustered Data ONTAP 9 or later, what is the default minimum number of disks? A. 6 B. 2 C. 5 D. 3 E. 10 F. 1 G. 4 Answer: D Updated NS0-161 Exam Guide NetApp NCDA ONTAP Certified V9.02 Killtest 13 / 13