1 / 10

Welding and Oxy – Acetylene Cutting

Welding and Oxy – Acetylene Cutting. Equipment and Safety. Objectives. Identify equipment used in welding and oxy- acetylene cutting. Use proper safety procedures when welding and oxy- acetylene cutting. Identify safety equipment used in welding and oxy- acetylene. Welding Equipment.

kimama
Download Presentation

Welding and Oxy – Acetylene Cutting

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Welding and Oxy – Acetylene Cutting Equipment and Safety

  2. Objectives • Identify equipment used in welding and oxy- acetylene cutting. • Use proper safety procedures when welding and oxy- acetylene cutting. • Identify safety equipment used in welding and oxy- acetylene.

  3. Welding Equipment • Power source • 110 unit • 220 unit • 440 unit • Diesel unit

  4. Oxy- Acetylene Equipment • Torch • Regulator • Hoses • Striker • Tip cleaner

  5. Long sleeve shirt Long pants Foot wear Safety glasses Gloves Helmet Safety Equipment

  6. Welding Safety • Always wear proper clothes when welding • Place ground lead on material before turning machine on. • Check cables for cuts in the insulation. • Never stand in water when welding. • Never use gloves to pick up hot material. • Never weld near flammable objects.

  7. Oxy- Acetylene Safety • Make sure regulators are tight. • Never use oily rags around cylinders and regulators. • Check hoses for leaks before lighting the torch. • Make sure regulators are at proper settings. 15 psi max. acetylene 40 psi max. oxygen

  8. Continued • Make sure mixing knob is off before lighting torch. • Light acetylene first then mix oxygen. • Do not pick up material with gloves after it is cut. • Cut off cylinders when through cutting.

  9. Review • Why does one wear a long sleeve shirt when welding? • How high can the acetylene regulator be set? • When must one use safety when cutting or welding?

More Related