1 / 17

Split & In-Line Consoles

Signal Flow In-Depth. Split & In-Line Consoles. Hearing Sources. There are two sources of sound in the recording studio. 1. The musicians you are recording. 2. Tracks already recorded. INPUT vs. MONITOR channels. The INPUT channels are for listening to individual live channels

kiri
Download Presentation

Split & In-Line Consoles

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Signal Flow In-Depth Split & In-Line Consoles

  2. Hearing Sources • There are two sources of sound in the recording studio. • 1. The musicians you are recording. • 2. Tracks already recorded

  3. INPUT vs. MONITOR channels • The INPUT channels are for listening to individual live channels • The MONITOR channels control playback on your control room loudspeakers.

  4. SPLIT Console • We learned how there are SPLIT and IN-LINE consoles… • Remember, a SPLIT console has SEPARATE Input & Monitor channels • This is very SIMPLE to see and understand

  5. Split Console (Trident) Input Side Input Side Monitor Side

  6. IN-LINE Consoles • Monitoring is incorporated into the channel strips • Therefore: Each channel has INPUT control AND MONITOR control • There are TWO SIGNAL PATHS for each channel

  7. This can be more confusing… • There will be two faders in the channel strip - one for the input path and one for the monitor path. • It might also be a FADER and a POT

  8. Double-Duty… • The fader for the Input controls the level of the signal going to the multitrack. • The fader for the monitor controls the level you hear of the track that has already been recorded.

  9. GROUPS • Many consoles have groups that give more routing options • You can send each TRACK to a GROUP or to the MAIN MIX (L/R)

  10. GROUPS

  11. Example…. Mackie Mixer

  12. http://cachepe.zzounds.com/media/quality,85/brand,zzounds/Studio32-0b43c1eba65934b39a2097bfd5e0946c.jpghttp://cachepe.zzounds.com/media/quality,85/brand,zzounds/Studio32-0b43c1eba65934b39a2097bfd5e0946c.jpg

  13. Alternatives… • Outboard PRE AMPS can be used • This way, the console is only for MONITORING • CONTROLLERS with motorized faders allow for total recall

  14. Using your DAW • DAW software is basically a MONITOR MIXER • A recording INTERFACE simply has a monitor level control and the mix is done using software

  15. Some Interesting Info… • Split Mode: • sometimes called English consoles by American engineers. • The split console uses separate modules for the inputs and outputs. • Usually the input modules are placed to the left of the master modules on the console and are used for the microphone and line input signals while recording and then again for machine returns when mixing. • The group/monitor modules are usually to the right of the master module. • The group/monitor module has 2 signal paths. • Like the input modules, the group/monitor modules are equipped with a fader which is used to set the group level and a monitor fader ( or pot ) to control the level of the monitor signal being sent to the stereo bus which also feeds the control room outputs to the monitor speakers. • The monitor section often has a limited EQ which is less extensive than the equalizer on the input channels. • The monitor section can be switched to listen to the group output or the multitrack output. • Split Mode Examples; early Neve consoles, most Trident and Soundcraft consoles and all Soundtracs consoles prior to the IL & Quartz, most DDA's and most Mackie analogue modelshttp://www.larking.com/Split%20or%20In%20Line%20description.htm

  16. In Line • Originated in the USA. • Each module carries 2 signal paths, the microphone or line input and the group/tape monitor signal. • The upper part of the module caters for the Mic or Line input when in the recording mode, it looks very similar to the Split Mode mic/line channel apart from the fact that is has 2 additional controls to handle the monitor signal, these are level ( sometimes a fader sometimes a pot ) plus a pan pot. • There are also additional switches required, because both signal paths are on the same module they have to share the auxiliary sends so switches are required to switch the send pots, usually in pairs, between the mic line path and monitor path. • There will also find a 'Mix' button on an In Line module, this is the best feature of the design, this button reverses the inputs so that the machine return will come into the main signal patch and the Mic or line signal will come through the monitor path. This features allows engineers to mix recorded tracks while they are overdubbing • In Line Examples, all SSL's current Neve's, Soundtracs Jade & Solitaire consoles, TLA VTC's, MCI's & most Sony consoles.

  17. Advantages & Disadvantages:  • The main advantages of the In Line console is more inputs in a smaller space and the reduced cost of production. As a single module is used for the input and output signals fewer modules are required; a 24 buss Split Mode console will have 24 more modules than an In Line console. • Generally a Split Console has more facilities than an In Line, it has a fader on the group output which the In Line does not have although some manufacturers provide a pot to adjust the group output level, also the aux sends and EQ on an In Line module has to be shared between the mic/line input and the monitor signal

More Related