1 / 8

Clean all dried glue off of the metal.

Clean all dried glue off of the metal. You need some type of hook for the rubber bands. It should be around 3 inches wide. Really glue this down well. It will be under a lot of stress (maybe 30 Newtons of force). Cut and add a rubber band safety flap. Pre-bend it slightly.

kirsten-horn
Download Presentation

Clean all dried glue off of the metal.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Clean all dried glue off of the metal.

  2. You need some type of hook for the rubber bands. It should be around 3 inches wide.

  3. Really glue this down well. It will be under a lot of stress (maybe 30 Newtons of force)

  4. Cut and add a rubber band safety flap.

  5. Pre-bend it slightly.

  6. Attach it so it will catch the rubber bands, but not so it will be really hard to put new rubber bands on.

  7. Your Newton Dragon is ready to go!

More Related