1 / 8

CMS-GRPC status

CMS-GRPC status. Imad Laktineh for the GRPC-CMS groups. Motivation. Equip the stations RE1/1, RE2/1, RE3/1 and RE4/1 corresponding to high η region (1.6- 2.4) of the CMS with GRPC using new kind of semi-conductive glass.

kitra-wells
Download Presentation

CMS-GRPC status

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CMS-GRPC status Imad Laktineh for the GRPC-CMS groups

  2. Motivation Equip the stations RE1/1, RE2/1, RE3/1 and RE4/1 corresponding to high η region (1.6- 2.4) of the CMS with GRPC using new kind of semi-conductive glass. This allows to improve on trigger efficiency and physics performances.

  3. Single-Gap GRPC Detector R&D Low-resistivity GRPC performance at high rate DESY, January 2012 9 kHz/cm2 is highest rate one can get at DESY

  4. DetectorR&D Multi-Gap GRPC Beam Test@HZDR June, 2012 Time Resolution < 40ps HV scan Rate scan

  5. Electronics R&D CMS-GRPC • Goals • To develop/adapt readout electronics which stands high rate and • allows to exploit the time precision the RPC: •  < 1 ns in case of single-gap GRPC •  < 100 ps in case of multi-gap GRPC

  6. 4.7 mm 4.3mm R&D for single gap and sub-nanosecond time resolution • - Use the 64-channel HARDROC ASICsused to read the GRPC pf the Semi Digital HCAL prototype of ILC • Use appropriate “Link Box” (available) • Use a TDC with better than 100 pstime • Design new PCB with pick-up strips (pitch of 1.5 mm) • on two faces. The PCB is of a square shape (30X30 cm2). ASICs are embedded • on the PCB and only one side is read out. • This can be used to equip the small GRPC already tested • with the same electronics (but without the TDC ) and then use cosmic rays to check the sub-nanosecond time resolution. ASICs : HARDROC 64 channels, SiGe Trigger less mode 3 thresholds Range: 10 fC-15 pC Gain correctionuniformity I2C protocol. Cabling is ongoing

  7. R&D for multi gap and <100 ps time resolution • Use the 16-channel PETIROC ASICs (omega group-Paris) : • High bandwidthpreamp (GBWP> 10 GHz), <3 mW/ch, dual time and charge measurement up to 2500 pe, jitter< 10 psrms • To do list: • Develop a new Link Box • Use a TDC with 25 ps time resolution (available) per ASIC • Design new PCB with pick-up strips (different values of pitch) • ASICs and the Link Box are on the same PCB (on the edge) • the two strip’s ends are read out with two different ASICs • -The final size of the PCB will be that of RE1/X detector. OMEGA, NCEPU, TSINGUHA The aim is to include a TDC in each channel (2014)

  8. 24Ch 25ps TDC module 100M Ethernet Readout with TCP/IP support Cyclone-II FPGA EP2C35F484C6 Socket for TCXO (opt.) Tsinghua university Differential input connector

More Related