1 / 13

MPX Process Xpert

MPX Process Xpert. Process Control Overview. Direct Machine Upload. Process Setup. MPX Setup Wizard. One Good Part. CAE - MPI/MPA. Direct Machine Upload. One Good Part. One Good Part. Process Optimization. Many Good Parts. No Burn. No Short. No Flash. ü.

klantz
Download Presentation

MPX Process Xpert

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MPX Process Xpert Process Control Overview

  2. Direct Machine Upload Process Setup MPX Setup Wizard One Good Part CAE - MPI/MPA Direct Machine Upload One Good Part One Good Part Process Optimization Many Good Parts No Burn No Short No Flash ü Direct Machine Upload Process Control Check Every Part MPX Software Modules

  3. Process Control • Monitors Machine Process • Determines Process Limits • Performs Statistical Analysis • Controls Machine Process • Alarms Operator to Potential Problems • Automatically Corrects Process

  4. Process Parameters

  5. 45 Parameters

  6. Screw Position

  7. Velocity Trace

  8. Pressure Trace

  9. Adviser

  10. Out of control Correction Monitoring

  11. Diagnostic

  12. ü Direct Machine Upload Process Control Check Every Part Process Control Summary • Used for Production Monitoring and Control • Monitors, Controls Process • System that integrates withthe machine controller • Determines Process Limits - Upper & Lower Control & Specification Limits • Performs Statistical Analysis - Displays X-bar & R control charts for Monitored Process Parameters • Alarms Operator to Potential Problems • Automatically Corrects Process

  13. Thank you Beginning

More Related