360 likes | 582 Views
Where else but in Canada with its extreme variations of climate could one better choose for the testing and the use of door weatherstripping. We at K.N. Crowder with the help and concern of Architects and Contract Hardware Consultants are dedicated to supply products that meet or exceed these demands. We have been doing it for over 50 years. All weatherstripping is punched and supplied with self-tapping screws or self-drilling sheet metal (Teks) at additional costs, see price list. All weatherstrip is available in Mill finish, Bronze, Clear or Gold anodized.
E N D
K . N. CROWDER MFG. INC. THRESHOLDS, WEATHERSTRIP, ASTRAGALS, AUTOMATIC DOOR BOTTOMS & STAIR NOSINGS PRODUCT CATALOGUE CATALOGUE APRIL 2010 www.kncrowder.com 65 65 www.kncrowder.com “Prices and Designs subject to change without notice” e without notice”
K. N. CROWDER MFG. INC. www.kncrowder.com customerservice@kncrowder.com K. N. CROWDER MFG. INC. 1220 Burloak Drive, Burlington, Ontario L7L 6B3 Telephone: 905-315-9788 Toll Free Telephone: 1-866-999-1KNC (1562) Fax: 905-315-8090 Toll Free Fax: 1-800-567-0123 K. N. CROWDER INC. 210 Eighth Street South, Lewiston, New York 14092 Telephone: 716-754-8247 Toll Free Telephone: 1-866-999-1KNC (1562) Toll Free Fax: 1-800-567-0123 GENERAL INFORMATION Where else but in Canada with its extreme variations of climate could one better choose for the testing and use of Thresholds, Weatherstrip, Astragals, Automatic Door Bottoms, and Stair Nosings. We at K. N. Crowder Mfg. Inc., with the help and concern of Architects and Architectural Hardware Consultants, are dedicated to supply products that meet or exceed these demands. We have been doing this for over 60 years! This symbol indicates products that are listed for use on metal doors and frames up to and including 1-1/2 hour locations. [The following products are also listed for use on metal doors and frames for installation in 3 hour locations: Weatherstrip W-23, W-24S, W-25. Astragal W-25]. Unless otherwise noted, products listed and labeled with this symbol have been evaluated for conformance to the following standards as a component part in a Door Assembly: - ASTM-E152, Methods of Fire Tests of Door Assemblies - CAN/ULC-S104, Standard Method for Fire Tests of Door Assemblies - NFPA-252, Standard Methods of Fire Tests of Door Assemblies - UBC-7-2-94, Uniform Building Code - UL-10(b), Fire Tests of Door Assemblies And are installed in accordance with the following: Code Requirements and Manufacturer’s Installation Instructions. All assemblies are identified by a mark bearing the “Listed” WHI Certification Mark. TESTED BY INTERTEK TESTING SERVICES. SOUND/LIGHT - Products displaying this symbol are designed for use in openings where reduction of light and/or sound is necessary. Due to the variety of door and frame combinations, these products may vary in their performance. Tested ASTM E 90-90 and ASTM E-1408-91. LISTED AIR INFILTRATION - Tested to ASTM E-283 and SDI 116. Products displaying this symbol have been Air Infiltration tested in accordance with the requirements of ASTM E-238 Rate of Air Leakage Through Exterior Windows, Curtain Walls & Doors and SDI 116 Test Procedure and acceptance of Rate of Air Flow Through Closed Steel Door and Frame Assemblies (Steel Door Institute). All products shown with this symbol are well below maximum leakage allowed. AIR CLASSIFIED This Product is Listed by: UL ANTI-SLIP HANDICAPPED UNDERWRITERS LABORATORIES INC. and Bears the Mark R C www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 2
TABLE OF CONTENTS S E R I E S S E R I E S CLASSIFIED CLASSIFIED UL UL P A G E P A G E LISTED LISTED R R C C THRESHOLDS BUILD ANY SIZE THRESHOLDS ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? CT-1 CT-9 CT-10 CT-11 CT-12 CT-16 CT-31 CT-32 CT-36 CT-39 CT-64 CT-65 CT-66 CT-67 CT-68 CT-69 CT-94 CT-95 CT-610 CT-611 CT-612 CT-704 CT-705 CT-706 CT-804 CT-805 CT-806 CT-807 CT-808 CT-909 CT-910 CT-911 CT-912 CT-913 CT-914 CT-915 CT-916 16 9 9 9 9 16 16 CT-23 CT-22/4A CT-100 CT-101 CT-103 CT-104 CT-106 CT-175 17 17 17 17 17 17 17 17 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 9 16 16 1/4" THERMAL BREAK THRESHOLDS 6 6 6 6 6 6 CT-74 CT-75 CT-76 CT-80 CT-81 CT-83 CT-86 CT-87 12 12 12 12 12 12 12 12 16 16 6 6 6 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 1/2" THERMAL BREAK THRESHOLDS CT-406 CT-407 CT-408 CT-409 CT-40N CT-40P CT-40S CT-410 CT-410-2 CT-41-1 CT-42-1 CT-43-1 CT-44 CT-44-1 CT-45 CT-45-1 CT-46 CT-47 CT-47-1 CT-47-1S CT-47S CT-48 CT-48S CT-49 CT-49-1 CT-49S 13 & 14 13 & 14 13 & 14 13 & 14 7 & 11 7 & 11 7 & 11 13 & 14 13 & 14 13 & 14 13 & 14 13 & 14 ? ? ? ? 14 13 & 14 14 13 & 14 14 15 13 13 15 15 15 15 13 15 CARPET DIVIDERS CT-60 CT-61 16 16 www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 3
TABLE OF CONTENTS (CONT’D) S E R I E S S E R I E S CLASSIFIED CLASSIFIED UL UL P A G E P A G E LISTED LISTED R R C C STAIR NOSINGS WEATHERSTRIP (CONT’D) ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ CT-20/3A & CT-20/3 CT-20/4 & CT-20/4A CT-20/5A & CT-20/5 CT-21/2 & CT-21/2A CT21/3A & CT-21/3 CT-21/4 & CT-21/4A CT-21/5A & CT-21/5 CT-22/34A CT-22/138A & CT22/138 CT-22/3 & CT-22/3A CT22/4A & CT-22/4 CT-23 18 18 18 19 19 19 19 18 18 18 W-32S W-47 W-47S W-49 W-50S W-61 W-87P W-88N W-88P 31 31 31 31 31 31 33 33 33 ∗ ∗ ∗ ∗ 17 & 18 17 & 18 SELF ADHESIVE WEATHERSTRIP ∗ ∗ ∗ ∗ ∗ ∗ W-21 W-66 W-22 6216 32 32 32 32 STAIR NOSING ANCHORS CT-27 CT-227 19 19 KERF MOUNTED WEATHERSTRIP W-28 W-29 W-31 33 33 33 STAINLESS STEEL PRODUCTS CT-9SS CT-10SS CT-50SS CT-52SS W-8SS W-13SS W-13S-SS 20 20 ∗ ∗ 20 & 22 20 SWEEPS 20 & 36 W-4 W-11 W-13S W-13S-2 W-19 W-23 W-24S W-25S W-26-1 W-26-2 W-26-3 W-33S W-34S W-35-1 W-35-2 W-35-3 W-37-1 W-38S 26 26 26 26 26 20 20 ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ WEATHERSTRIP W-1 & W-1F W-2 & W-2F W-3 W-6 W-13 W-14 W-15 W-16N W-16P W-16S W-16V W-17N W-17S W-18 W-20N W-20P W-20S W-23 W-27 W-32N W-32P 28 28 33 28 27 & 30 27 27 27 27 27 27 27 27 27 27 27 26 ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ 28 & 38 28 28 & 38 29 29 29 29 29 29 30 & 38 30 30 30 SPRING LOADED AND ADJUSTABLE WEATHERSTRIP ∗ ∗ W-42 W-43 W-44 W-45 W-48 34 34 34 27 & 30 30 31 31 34 & 38 34 www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 4
S E R I E S S E R I E S CLASSIFIED CLASSIFIED UL UL P A G E P A G E LISTED LISTED R R C C AUTOMATIC DOOR BOTTOMS SPRING LOADED AND ADJUSTABLE ASTRAGALS W-40 W-40M W-40P W-40V W-41 35 35 35 35 35 INTRODUCTION CT-50 CT-50F CT-50SS CT-51 CT-51F CT-52 CT-52S CT-52SS CT-52B CT-53 CT-53S CT-53B CT-53F CT-54 CT-54N 21 ? ? ? ? ? 22 & 38 22 20 & 22 22 & 38 22 23 23 20 23 23 23 23 23 24 24 ASTRAGALS W-5 W-7 W-8 W-8P W-8S W-8SP W-8SS W-9 W-25 36 36 36 36 36 36 ? 20 & 36 ? 36 36 ? ? ? ? ? ? ? DOOR SHOES KNC SOUND CONTROL CT-50 CT-51 CT-70 CT-71 CT-72 W-13 W-15 W-18 W-45 22 & 38 22 & 38 CT-55 CT-730 CT-745 CT-746 CT-747 CT-748 25 24 25 25 25 25 ? ? 37 37 37 ? ? 28 & 38 28 & 38 30 & 38 34 & 38 INDEX ? 39 LIST OF AGENTS & OTHER PRODUCTS BY KNC 40 FASTENERS THRESHOLDS: ALL THRESHOLDS ARE SUPPLIED PRE-DRILLED AND COUNTER SUNK WITH 3/16” X 1-3/4” HiLo-TAPPING THREAD, GREY, PHILLIPS DRIVE, CONCRETE SCREWS. (5/32” PRE-DRILL REQUIRED). WEATHERSTRIP: WHERE APPLICABLE, WEATHERSTRIP SEALS ARE SUPPLIED PUNCHED WITH OBROUND HOLES FOR ADJUSTMENT AND #8 X 3/4” SELF-DRILLING PAN HEAD, ROBERTSON DRIVE, TEK SCREWS. OPTIONAL: OTHER FASTENERS, IN STANDARD ZINC PLATED, STAINLESS STEEL & TORX TAMPERPROOF SCREWS ARE AVAILABLE. SEE BELOW FOR DETAILS. CONTACT CUSTOMER SERVICE FOR PRICING & AVAILABILITY #10 x 1-1/2” Truss Head, Robertson Drive, Type A Screw #8 x 1” Pan Head, Robertson Drive, Self-Drilling Tek Screw #10 x 1” Pan Head, Robertson Drive, Self-Drilling Tek Screw #10 x 1-1/2” Flat Head, Robertson Drive, Type A Screw 1/4”-20 x 3/4” Button Head Socket Cap Screw with Security Sleeve (For Astragals & W-19 Door Sweep only) www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 5
THRESHOLDS Welding is available upon request. ALL PRODUCTS ON THIS PAGE 11/16" [17.5mm] LISTED CT- 40N* STOP STRIP CT-64 [6.4mm] 1/4" 7/16" [11.1mm] [101.6mm] 4" EXTRUDED ALUMINUM EXTRUDED ALUMINUM & NEOPRENE CT-65 [6.4mm] 1/4" [127mm] 5" EXTRUDED ALUMINUM 11/16" [17.5mm] CT- 40P* STOP STRIP CT-66 [6.4mm] 1/4" 7/16" [11.1mm] [152.4mm] 6" EXTRUDED ALUMINUM EXTRUDED ALUMINUM & PILE CT-67 [6.4mm] 1/4" NEW 11/16" [17.5mm] [177.8mm] 7" 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM CT- 40S* STOP STRIP CT-68 LISTED 7/16" [11.1mm] [6.4mm] 1/4" [203.2mm] 8" 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM EXTRUDED ALUMINUM & SILICONE CT-69 [6.4mm] 1/4" * The following products are not [228.6mm] 9" 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM CT-610 [6.4mm] 1/4" [254mm] 10" 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM CT-611 [6.4mm] 1/4" [279.4mm] 11" 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM CT-612 [6.4mm] 1/4" [304.8mm] 12" 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM www.kncrowder.com www.kncrowder.com 100% CANADIAN OWNED AND OPERATED A PRODUCT OF K. N. CROWDER MFG. INC. 6 7
THRESHOLDS ALL PRODUCTS ON THIS PAGE LISTED CT-704 1/4" [6.4mm] 4" [101.6mm] EXTRUDED ALUMINUM CT-705 1/4" [6.4mm] 5" [127mm] EXTRUDED ALUMINUM CT-706 1/4" [6.4mm] 6" [152.4mm] EXTRUDED ALUMINUM CT-804 1/2" 1/2" 1/2" [12.7mm] [12.7mm] [12.7mm] 4" [101.6mm] EXTRUDED ALUMINUM CT-805 1/2" [12.7mm] 5" [127mm] EXTRUDED ALUMINUM CT-806 1/2" [12.7mm] 6" [152.4mm] EXTRUDED ALUMINUM CT-807 1/2" [12.7mm] 7" [177.8mm] EXTRUDED ALUMINUM CT-808 8" [203.2mm] EXTRUDED ALUMINUM www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 8
THRESHOLDS ALL PRODUCTS ON THIS PAGE LISTED CT-9 1/2" [12.7mm] TYPICAL ALL THRESHOLDS ON THIS PAGE 4" [101.6mm] EXTRUDED ALUMINUM CT-10 5" [127mm] EXTRUDED ALUMINUM CT-10 AND CT-11 THRESHOLDS AVAILABLE NOTCHED FOR STD HOLLOW METAL DOOR FRAME. STANDARD NOTCH SIZE IS: 2-7/16” WIDE X 5/8” DEEP. NEW CT-11 6" [152.4mm] EXTRUDED ALUMINUM CT-12 7" [177.8mm] EXTRUDED ALUMINUM CT-32 8" [203.2mm] EXTRUDED ALUMINUM www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 9
THRESHOLDS ALL PRODUCTS ON THIS PAGE Welding is available upon request. LISTED 11/16" [17.5mm] 1/2" [12.7mm] TYPICAL ALL THRESHOLDS ON THESE PAGES CT-909 CT- 40N* STOP STRIP 7/16" [11.1mm] 9" [228.6mm] 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM EXTRUDED ALUMINUM & NEOPRENE CT-910 11/16" [17.5mm] CT- 40P* STOP STRIP 10" [254mm] 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM 7/16" [11.1mm] CT-911 EXTRUDED ALUMINUM & PILE NEW 11" [279.4mm] 11/16" [17.5mm] 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM CT- 40S* STOP STRIP LISTED 7/16" [11.1mm] CT-912 EXTRUDED ALUMINUM & SILICONE 12" [304.8mm] 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM * The following products are not CT-913 13" [330.2mm] 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM CT-914 14" [355.6mm] 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM CT-915 15" [381mm] 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM CT-916 16" [406.4mm] 2 PIECE CONSTRUCTION EXTRUDED ALUMINUM www.kncrowder.com www.kncrowder.com 100% CANADIAN OWNED AND OPERATED A PRODUCT OF K. N. CROWDER MFG. INC. 10 11
1/4” THERMAL BREAK THRESHOLDS NEW PRODUCT LINE EXTRUDED ALUMINUM INSERT NOT INCLUDED CT-80 ALL PRODUCTS ON THIS PAGE 1/4" [6.4mm] 1 3/4" [44.5mm] TYPICAL ALL THRESHOLDS THIS PAGE EXTRUDED ALUMINUM INSERT NOT INCLUDED CT-81 CT-83 EXTRUDED ALUMINUM ONE INSERT INCLUDED 2 27/32" [72.2mm] 1 5/8" [41.3mm] 1 13/16" [46mm] CT-74 EXTRUDED ALUMINUM 3 7/8" [98.4mm] CT-75 EXTRUDED ALUMINUM 5" [127mm] CT-76 EXTRUDED ALUMINUM 6 1/8" [155.6mm] CT-86 EXTRUDED ALUMINUM 5 7/8" [149.2mm] CT-87 EXTRUDED ALUMINUM 7" [177.8mm] www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 12
1/2” THERMAL BREAK THRESHOLDS CT-44-1 EXTRUDED ALUMINUM INSERT NOT INCLUDED 1/2" [12.7mm] 2" [50.8mm] CT-45-1 EXTRUDED ALUMINUM INSERT NOT INCLUDED 1/2" [12.7mm] 3" [76.2mm] NEW CT-42-1 EXTRUDED ALUMINUM INSERT NOT INCLUDED 1/2" [12.7mm] 4" [101.6mm] NEW CT-43-1 EXTRUDED ALUMINUM INSERT NOT INCLUDED 5" [127mm] 5/16" [7.9mm] CT-49-1 EXTRUDED ALUMINUM INSERT NOT INCLUDED 1/2" 13/32" [10.3mm] [12.7mm] 1 11/32" [34.1mm] FROST INSERT RIGID P.V.C. CT-41-1 EXTRUDED ALUMINUM ONE INSERT INCLUDED 1/2" [12.7mm] 2" [50.8mm] CT-47-1 EXTRUDED ALUMINUM WITH FLEXIBLE NEOPRENE. FROST INSERT NOT INCLUDED CT-47-1S EXTRUDED ALUMINUM WITH FLEXIBLE SILICONE. FROST INSERT NOT INCLUDED FLEXIBLE NEOPRENE 15/16" [23.8mm] NEW 1 29/32" [48.4mm] www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 13
1/2” THERMAL BREAK THRESHOLDS CT-44 EXTRUDED ALUMINUM WITH RIGID P.V.C. CT-48S NEW ALL PRODUCTS ON THIS PAGE EXTRUDED ALUMINUM WITH FLEXIBLE SILICONE & RIGID P.V.C. FROST INSERT FLEXIBLE SILICONE 4" [101.6mm] CT-48 15/16" [23.8mm] CT-45 EXTRUDED ALUMINUM WITH RIGID P.V.C. EXTRUDED ALUMINUM WITH FLEXIBLE NEOPRENE & RIGID P.V.C. FROST INSERT 5" [127mm] 5" [127mm] CT-46 EXTRUDED ALUMINUM WITH RIGID P.V.C. CT-47 FLEXIBLE NEOPRENE EXTRUDED ALUMINUM WITH FLEXIBLE NEOPRENE & RIGID P.V.C. FROST INSERT 6" [152.4mm] 15/16" [23.8mm] CT-406 EXTRUDED ALUMINUM WITH RIGID P.V.C. CT-47S NEW PRODUCT CODE EXTRUDED ALUMINUM WITH FLEXIBLE SILICONE & RIGID P.V.C. FROST INSERT 3 7/8" [98.4mm] 6" [152.4mm] CT-407 EXTRUDED ALUMINUM WITH RIGID P.V.C. NEW PRODUCT CODE CT-49S FLEXIBLE SILICONE EXTRUDED ALUMINUM WITH FLEXIBLE SILICONE & RIGID P.V.C. FROST INSERT 7" [177.8mm] 15/16" [23.8mm] CT-49 CT-408 EXTRUDED ALUMINUM WITH RIGID P.V.C. 13/32" [10.3] NEW PRODUCT CODE EXTRUDED ALUMINUM WITH FLEXIBLE NEOPRENE & RIGID P.V.C. FROST INSERT 3 1/4" [82.6mm] 8" [203.2mm] CT-409 EXTRUDED ALUMINUM WITH RIGID P.V.C. NEW PRODUCT CODE 9" [228.6mm] CT-410 EXTRUDED ALUMINUM WITH RIGID P.V.C. NEW PRODUCT CODE 10" [254mm] CT-410-2 EXTRUDED ALUMINUM WITH RIGID P.V.C. NEW PRODUCT CODE 3" [76.2mm] 2" [50.8mm] 5" [127mm] www.kncrowder.com www.kncrowder.com 100% CANADIAN OWNED AND OPERATED A PRODUCT OF K. N. CROWDER MFG. INC. 14 15
THRESHOLDS CT-1 CT-16 25/32" [19.8mm] 1/2" [12.7mm] 7/16" [11.1mm] 3 5/8" [92.1mm] EXTRUDED ALUMINUM AND VINYL 1 9/16" [39.7mm] EXTRUDED ALUMINUM AND VINYL CT-31 CT-36 5/8" [15.9mm] 3/8" [9.5mm] 3 19/32" [91.3mm] EXTRUDED ALUMINUM AND VINYL 2 1/2" [63.5mm] EXTRUDED ALUMINUM CT-94 1/2" [12.7mm] 3 15/16" [100mm] EXTRUDED ALUMINUM CT-95 1/2" [12.7mm] 4 15/16" [125.4mm] EXTRUDED ALUMINUM 1 5/8" [41.3mm] CT-39 13/16" [20.6mm] 1/2" [12.7mm] 4 31/32" [126.2mm] EXTRUDED ALUMINUM AND VINYL CT-60 CT-61 CARPET DIVIDER CARPET DIVIDER LISTED LISTED 3/8" [9.5mm] 1 3/4" [44.5mm] D E D U R 4" [101.6mm] D E D U R E X T A L U M N I U M E X T A L U M N I U M www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 16
BUILD ANY SIZE THRESHOLDS NEW 1 1/2" [38.1mm] CT-175 1" CT-100 [25.4mm] 3/4" [19.1mm] 1/2" [12.7mm] 1/4" [6.4mm] 1 1/2" [38.1mm] 2" [50.8mm] EXTRUDED ALUMINUM EXTRUDED ALUMINUM CT-23 CT-103 1/4" [6.4mm] 1/4" [6.2mm] 1 1/8" [28.6mm] 3" [76.2mm] EXTRUDED ALUMINUM EXTRUDED ALUMINUM CT-106 1/4" [6.4mm] 6" [152.4mm] EXTRUDED ALUMINUM CT-104 CT-100 CT-175 1/2" 3/4" [19.1mm] [12.7mm] 6 1/2" [165.1mm] CT-23 CT-22/4A CT-175 6 5/8" [168.3mm] CT-100 CT-104 CT-103 CT-101 9" [228.6mm] www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 17
STAIR NOSINGS CT-21/2 LANEL INSERT (P.V.C.) 2" [50.8mm] ALL PRODUCTS ON THIS PAGE ALL PRODUCTS ON THIS PAGE CT-20/3A ALUMINUM OXIDE GRIT IN EPOXY BASE CT-21/2A ALUMINUM OXIDE GRIT IN EPOXY BASE 1/4" [6.4mm] 1/4" [6.4mm] 1/2" [12.7mm] EXTRUDED ALUMINUM CT-20/3 LANEL INSERT (P.V.C.) CT-21/3A ALUMINUM OXIDE GRIT IN EPOXY BASE 3" [76.2mm] 3" [76.2mm] EXTRUDED ALUMINUM 2" [50.8mm] CT-21/3 LANEL INSERT (P.V.C.) CT-20/4 LANEL INSERT (P.V.C.) 1/4" [6.4mm] EXTRUDED ALUMINUM 1/2" [12.7mm] CT-21/4 LANEL INSERT (P.V.C.) CT-20/4A ALUMINUM OXIDE GRIT IN EPOXY BASE 4" [101.6mm] 4" [101.6mm] EXTRUDED ALUMINUM CT-21/4A ALUMINUM OXIDE GRIT IN EPOXY BASE EXTRUDED ALUMINUM CT-20/5A ALUMINUM OXIDE GRIT IN EPOXY BASE 1/4" [6.4mm] 1/2" 5" [127mm] [12.7mm] CT-20/5 LANEL INSERT (P.V.C.) 5" [127mm] EXTRUDED ALUMINUM EXTRUDED ALUMINUM CT-21/5A ALUMINUM OXIDE GRIT IN EPOXY BASE 3/4" [19.1mm] CT-22/34A ALUMINUM OXIDE GRIT IN EPOXY BASE SELF ANCHORING EXTRUDED ALUMINUM CT-21/5 LANEL INSERT (P.V.C.) CT-23 1 3/4" [44.5mm] 1/4" [6.4mm] 3/4" [19.1mm] 1 1/8" [28.6mm] EXTRUDED ALUMINUM CT-22/138A ALUMINUM OXIDE GRIT IN EPOXY BASE 1/4" [6.4mm] CT-22/138 LANEL INSERT (P.V.C.) 1 3/8" [34.9mm] EXTRUDED ALUMINUM CT-20/3A Stair Nosing shown here for illustration purposes. CT-227 is sold separately. CT-20/3 Stair Nosing shown here for illustration purposes. CT-27 is sold separately. CT-22/3 LANEL INSERT (P.V.C.) 11/16" [17.5mm] Shown after bending on site. 1/4" [6.4mm] CT-22/3A ALUMINUM OXIDE GRIT IN EPOXY BASE 3" [76.2mm] CT-27 CAST METAL ANCHOR For use in concrete (pour in place installations). Nosings are pre-drilled and countersunk for machine screws (supplied with anchor). CT-227 HIDDEN STRAP ANCHOR For use with Abrasive applications only. No visible screws. Typical Spacing is 12” [300mm] center to center. EXTRUDED ALUMINUM CT-22/4A ALUMINUM OXIDE GRIT IN EPOXY BASE 1/4" [6.4mm] CT-22/4 LANEL INSERT (P.V.C.) 4" [101.6mm] Shipped as shown. EXTRUDED ALUMINUM www.kncrowder.com www.kncrowder.com 100% CANADIAN OWNED AND OPERATED A PRODUCT OF K. N. CROWDER MFG. INC. 18 19
STAINLESS STEEL PRODUCTS 3/16" [4.8mm] 1 7/16" [36.5mm] 3/16" [4.8mm] 5/32" [4mm] 1 5/32" [29.4mm]1 11/16" [42.9mm] W-13S-SS STAINLESS STEEL WITH SOLID NEOPRENE W-13SS STAINLESS STEEL AND CLOSED CELL NEOPRENE 5/8" 31/32" [24.6mm] [15.9mm] 2" [50.8mm] LISTED LISTED 2 7/32" [56.4mm] 1/8" [3.2mm] 2 1/2" [63.5mm] W-8SS STAINLESS STEEL ASTRAGAL CT-50SS STAINLESS STEEL OVER ANODIZED ALUMINUM & NEOPRENE SEAL CT-52SS STAINLESS STEEL OVER ANODIZED ALUMINUM & NEOPRENE SEAL 4" [101.6mm] 1/2" NEW PRODUCT LINE [12.7mm] CT-9SS 304 SS. 2B FINISH CT-11SS CT-64SS CT-65SS CT-66SS ALSO AVAILABLE. PLEASE SEE WEBSITE FOR DETAILS. 5" [127mm] 1/2" [12.7mm] CT-10SS 304 SS. 2B FINISH OTHER SIZES AVAILABLE UPON REQUEST www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 20
AUTOMATIC DOOR BOTTOMS K. N. Crowder Mfg. Inc. Where else but in Canada with its extreme variations of climate could one better choose for the testing and the use of Automatic Door Bottoms. We at K. N. Crowder with the help and concern of Architects and Contract Hardware Consultants, are dedicated to supply products that meet or exceed these demands. We have been doing it for over 65 years! (ADB CT-52 Shown with CT-10 Threshold) When nothing but the best will do...for the bottom of your doors... Our Automatic Door Bottoms (ADB) are made from extruded aluminum combined with closed cell sponge neoprene, silicone, felt, or brush. Activation occurs when the plunger is depressed against the door frame, sealing out draft, sound and light. When the door is opened the seal immediately retracts. TRIM LOCK SIDE OF DOOR ONLY MOUNTING HOLES ADJUSTABLE PLUNGER (Hinge Side) ACTIVATING SPRING AND SLIDE ASSEMBLY PRESSURE BAR AND SEAL (Neoprene) Specifications: • Reversible - same unit for right or left-handed doors. • Maximum drop is between 5/8” (Light Duty) - 13/16” (Heavy Duty) • Stock sizes can be shortened up to 6” (from lock side) on job site. • Fire Rated - Most types are fired rated (see Warnock Hersey symbol and refer to page 3 for more information). End Caps Are available for both ends and can be removed without taking door off the frame. www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 21
AUTOMATIC DOOR BOTTOMS 5/8" [15.9mm] 9/16" [14.3mm] 9/16" [14.3mm] CT-50 CT-50F CT-50SS 2 7/32" [56.4mm] 1 13/16" [46mm] 1 13/16" [46mm] LISTED LISTED 5/8" Max. Drop 5/8" Max. Drop 5/8" Max. Drop ANODIZED ALUMINUM & NEOPRENE SEAL ANODIZED ALUMINUM & FELT SEAL STAINLESS STEEL OVER ANODIZED ALUMINUM & NEOPRENE SEAL 17/32" [13.5mm] 17/32" [13.5mm] CT-51 CT-51F EXTRUDED ALUMINUM & NEOPRENE SEAL EXTRUDED ALUMINUM & FELT SEAL 1 1/2" [38.1mm] 1 1/2" [38.1mm] 5/16" [7.9mm] 5/8" Max. Drop 5/8" Max. Drop 1 3/16" [30.2mm] 1 3/16" [30.2mm] 9/16" [14.3mm] SURFACE MOUNT MORTISED APPLICATION www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 22
AUTOMATIC DOOR BOTTOMS CT-52 CT-52S CT-52S CT-52B CT-52F 29/32" [23mm] NEW 1 29/32" [48.4mm] LISTED LISTED 13/16" MAX DROP 13/16" MAX DROP 13/16" MAX DROP ANODIZED ALUMINUM & NEOPRENE SEAL ANODIZED ALUMINUM & SILICONE SEAL ANODIZED ALUMINUM & BRUSH SEAL ANODIZED ALUMINUM & FELT SEAL CT-53 CT-53S CT-53S CT-53B CT-53F 15/16" [23.8mm] NEW 1 5/8" [41.3mm] 13/16" MAX DROP 13/16" MAX DROP 13/16" MAX DROP EXTRUDED ALUMINUM & SILICONE SEAL EXTRUDED ALUMINUM & BRUSH SEAL EXTRUDED ALUMINUM & FELT SEAL 1 9/16" [39.7mm] EXTRUDED ALUMINUM & NEOPRENE SEAL SURFACE MOUNTED SEMI-MORTISED MORTISED APPLICATION www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 23
AUTOMATIC DOOR BOTTOMS CT-54 EXTRUDED ALUMINUM AND VINYL LISTED Designed to fit the recess of a standard hollow metal door. Available from stock sizes of 24", 30", 36", 42" and 48". Stock sizes can be shortened up to 6" except 24" which can be shortened to 21". Longer and shorter sizes fabricated to order - contact KNC. 1" [25.4mm] ILLUSTRATED WITH OPTIONAL 1/4" SHIM 7/16" [11.1mm] MAX. DROP 1 3/8" [34.9mm] CT-54N C/W NEOPRENE INSERT (NOT FIRE RATED) ADJUSTABLE DOOR SHOE CT-730 ADJUSTABLE DOOR SHOE WOOD OR HOLLOW METAL EXTRUDED ALUMINUM AND VINYL. FOR 1-3/4" DOORS 1/2" [12.7mm] 1" [25.4mm] 5/8" [15.9mm] 1/4" [6.4mm] 3/4" [19.1mm] ADJUSTMENT SCREW www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 24
DOOR SHOES NEW PRODUCT LINE 1 3/8" [34.9mm] 3/8" 1/8" [9.5mm] [3.2mm] CT-55 EXTRUDED ALUMINUM & PILE 1 3/16" [30.2mm] FOR 1-3/4" DOORS ONLY 1 1/16" [27mm] 7/8" 1 3/8" 5/8" 1 1/8" [28.6mm] [22.2mm] [34.9mm] [15.9mm] 1/2" [12.7mm] CLASSIFIED CLASSIFIED 1/4" 3/8" UL UL 3/8" [6.4mm] [9.5mm] [9.5mm] 1/2" R R [12.7mm] C C CT-745 EXTRUDED ALUMINUM & VINYL CT-746 EXTRUDED ALUMINUM & VINYL 3/4" 1 1/16" [27mm] 1 1/4" [31.8mm] [19.1mm] 1/4" [6.4mm] 1/2" [12.7mm] 1/4" 1/2" CLASSIFIED CLASSIFIED [6.4mm] [12.7mm] UL UL R R C C CT-747 EXTRUDED ALUMINUM & VINYL CT-748 EXTRUDED ALUMINUM & VINYL www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 25
SWEEPS 3/16" [4.8mm] 5/16" [7.9mm] W-11 CLEAR ANODIZED ALUMINUM W-4 MILL FINISH ALUMINUM 1 1/4" [31.8mm] 1 1/4" [31.8mm] 1 3/4" [44.5mm] 1 3/4" [44.5mm] GREY P.V.C. GREY P.V.C. 1/4" [6.4mm] 3/16" [4.8mm] NEW 1" [25.4mm] 1 1/4" [31.8mm] LISTED LISTED 1 3/4" [44.5mm] 1 25/32" [45.3mm] W-13S ANODIZED ALUMINUM WITH SOLID NEOPRENE STAINLESS STEEL AVAILABLE W-38S ANODIZED ALUMINUM & SILICONE SEAL 7/16" [11.1mm] DOMINION SWEEP 3/16" [4.8mm] 1 3/4" [44.5mm] 1 1/4" [31.8mm] 3" [76.2mm] LISTED LISTED 2 1/4" [57.2mm] W-19 ALUMINUM WITH SOLID NEOPRENE STAINLESS STEEL AVAILABLE W-13S-2 ANODIZED ALUMINUM WITH SOLID NEOPRENE STAINLESS STEEL AVAILABLE www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 26
SWEEPS ALL PRODUCTS ON THIS PAGE LISTED 3/8" [9.5mm] 1 3/32" [27.8mm] 1 3/32" [27.8mm] 1 3/32" [27.8mm] 2 3/32" [53.2mm] W-24S CLEAR ANODIZED ALUMINUM 2" [50.8mm] 3" [76.2mm] 7/32" [5.6mm] 17/32" [13.5mm] W-33S CLEAR ANODIZED ALUMINUM 5/8" [15.9mm] 7/8" [22.2mm] 1 5/16" [33.3mm] 1/2" W-34S CLEAR ANODIZED ALUMINUM 21/32" [16.7mm] W-23 CLEAR ANODIZED ALUMINUM [12.7mm] 1 11/16" [42.9mm] W-25S CLEAR ANODIZED ALUMINUM 1 3/8" [34.9mm] NEW 1 3/32" [27.8mm] 3/8" [9.5mm] W-35-1 W-35-2 W-35-3 CLEAR ANODIZED ALUMINUM 1 3/8" W-26-1 [34.9mm] 1" CLEAR ANODIZED ALUMINUM [25.4mm] W-35-1 1" [25.4mm] CLEAR ANODIZED ALUMINUM 2 3/8" W-26-2 2" [60.3mm] W-37-1 CLEAR ANODIZED ALUMINUM [50.8mm] W-35-2 W-26-1 MILL FINISH ALUMINUM W-26-2 MILL FINISH ALUMINUM W-26-3 MILL FINISH ALUMINUM 3 3/8" W-26-3 [85.7mm] 3" [76.2mm] W-35-3 www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 27
WEATHERSTRIP 31/32" [24.6mm] 1 1/4" [31.8mm] 11/16" [17.5mm] 1" [25.4mm] 9/32" [7.1mm] 11/32" [8.7mm] W-1 MILL FINISH ALUMINUM AND VINYL W-2 MILL FINISH ALUMINUM AND VINYL W-1F MILL FINISH ALUMINUM AND VINYL W-2F MILL FINISH ALUMINUM AND VINYL NEW NEW 1 17/32" [38.9 mm] 2 1/32" [51.6mm] DIS CONT INUED D D 1 1/2 1 1/2" [38.1mm] IS C C C C C CO O ON IS CO O O ON IS C CO O ON 1 1/4" [31.8mm] S CO ON S CO O O ON CO O ON CO O O O ON CO O ON 1/2" [12.7mm] O ON O ONT IN O ON ON ON ONT IN N ON ON 3/8" [9.5mm] 3/16" [4.8mm] 5/32" [4mm] N I IN IN N W-13 CLEAR ANODIZED ALUMINUM AND CLOSED CELL NEOPRENE W-6 MILL FINISH ALUMINUM AND CLOSED CELL NEOPRENE LISTED LISTED 1 1/2" [38.1mm] 1 1/16" [27mm] 1"[25.4mm] 25/32" [19.8mm] 7/16" [11.1mm] 3/8" [9.5mm] 1/4" [6.4mm] 1/4" [6.4mm] W-15 CLEAR ANODIZED ALUMINUM AND CLOSED CELL NEOPRENE W-14 CLEAR ANODIZED ALUMINUM AND CLOSED CELL NEOPRENE LISTED LISTED www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 28
WEATHERSTRIP 1 5/16" [33.3mm] 29/32" [23mm] 1 3/16"[30.2mm] 29/32" [23mm] 13/32" [10.3mm] 13/32" [10.3mm] 13/32" [10.3mm] 13/32" [10.3mm] LISTED W-16N W-16P CLEAR ANODIZED ALUMINUM AND PILE WITH FIN SEAL CLEAR ANODIZED ALUMINUM AND EXTRUDED NEOPRENE 1 7/32" [31mm] DI DIS CONT INUED 1 7/32"[31mm] 29/32" [23mm] CO ON N IS 29/32" [23mm] S C CO O ON S CONT IN N CON CO O ON O ONT IN O ON O ON N N N N O ON 7/16" [11.1mm] 11/32" [8.7mm] 13/32" [10.3mm] 13/32" [10.3mm] ON N N N N N ON ON ON ON ON I IN IN N LISTED W-16S CLEAR ANODIZED ALUMINUM AND SILICONE SEAL W-16V CLEAR ANODIZED ALUMINUM AND VINYL NEW 1 1/8" [28.6mm] 1 3/16" [30.2mm] 29/32" [23mm] 29/32" [23mm] 5/16" [7.9mm] 5/16" [7.9mm] LISTED W-17N CLEAR ANODIZED ALUMINUM AND NEOPRENE W-17S CLEAR ANODIZED ALUMINUM AND SILICONE SEAL NEW www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 29
WEATHERSTRIP 1 7/16" [36.5mm] 1 11/16" [42.9mm] 1" [25.4mm] 1" 1 1/2" [38.1mm] 5/16" [7.9mm] 1/4" [6.4mm] 5/16" [7.9mm] 3/16" [4.8mm] W-18 CLEAR ANODIZED ALUMINUM AND CLOSED CELL NEOPRENE W-20N CLEAR ANODIZED ALUMINUM AND NEOPRENE LISTED 1 3/4" [44.5mm] 1 23/32" [43.7mm] 1 1/2" [38.1mm] 1 1/2" [38.1mm] 5/16" [7.9mm] 5/16" [7.9mm] 11/32" [8.7mm] 11/32" [8.7mm] W-20P CLEAR ANODIZED ALUMINUM AND PILE WITH FIN SEAL W-20S CLEAR ANODIZED ALUMINUM AND SILICONE RUBBER LISTED NEW 1 3/32" [27.8mm] 1 1/8" [28.6mm] 23/32" [18.3mm] 5/8" 7/16" [11.1mm] 17/32" [13.5mm] 5/16" [7.9mm] [15.9mm] MAGNETIC WEATHERSTRIP FULL W-23 CLEAR ANODIZED ALUMINUM AND NYLON BRUSH W-27 CLEAR ANODIZED ALUMINUM AND VINYL WITH MAGNET BRUSH SEAL LISTINGS ON PAGE 27 www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 30
WEATHERSTRIP 1 1/4" [31.8mm] 1 5/16" [33.3mm] 1" [25.4mm] 1" [25.4mm] 5/16" [7.9mm] 5/16" [7.9mm] 7/16" [11.1mm] 7/16" [11.1mm] W-32P CLEAR ANODIZED ALUMINUM 2-PIECE W/SNAP ON COVER AND PILE WITH FIN SEAL W-32S CLEAR ANODIZED ALUMINUM 2-PIECE W/SNAP ON COVER AND SILICONE W-32N CLEAR ANODIZED ALUMINUM 2-PIECE W/SNAP ON COVER AND NEOPRENE NEW 1 13/32"[35.7mm] 1 1/16" [27mm] 1"[25.4mm] 25/32" [19.8mm] 21/32" [16.7mm] 1/4" [6.4mm] 1/4" [6.4mm] W-47 CLEAR ANODIZED ALUMINUM AND EXTRUDED NEOPRENE W-47S CLEAR ANODIZED ALUMINUM AND SILICONE LISTED W-49 MILL FINISH ALUMINUM AND CLOSED CELL NEOPRENE LISTED NEW 1 5/16"[33.3mm] 1 1/4" [31.8mm] 1 1/16" [27mm] 1"[25.4mm] 13/32" [10.3mm] 3/8" [9.5mm] 1/2" [12.7mm] 1/4"[6.4mm] W-50S CLEAR ANODIZED ALUMINUM AND SILICONE RUBBER SUITABLE FOR -110 F ( -80 C) TO +570 F (+300 C) W-61N CLEAR ANODIZED ALUMINUM AND EXTRUDED NEOPRENE LISTED LISTED o o o o www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 31
SELF ADHESIVE WEATHERSTRIP 1/2" 1/2" [12.7mm] [12.7mm] 1/4" [6.4mm] 1/4" [6.4mm] NEW W-21* -SANTOPRENE SELF ADHESIVE GASKET -SMOKE, LIGHT AND SOUND CONTROL -RESISTS FUNGUS AND MILDEW -TEMP. RANGE -80 F TO +150 F (-62 C TO +66 C) -AVAILABLE IN BLACK or BROWN W-22 -SILICONE SELF ADHESIVE GASKET -SMOKE, LIGHT AND SOUND CONTROL -UNAFFECTED BY FUNGUS AND MILDEW -TEMP. RANGE -110 F TO +400 F ( -80 C TO +204 C) -AVAILABLE IN BLACK or BROWN o o o o o o o o 3/8" [9.5mm] 3/16" [4.8mm] AIR NEW W-66 -SANTOPRENE SELF ADHESIVE GASKET -SMOKE, LIGHT AND SOUND CONTROL -RESISTS FUNGUS AND MILDEW -TEMP. RANGE -80 F TO +150 F (-62 C TO +66 C) -AVAILABLE IN BLACK or BROWN LISTED * W-21 is approved for use with 90 minute rated mineral core wood, plastic lamfaced fire doors & wood veneered steel frames. o o o o ADHESIVE BACKED NEOPRENE WEATHERSTRIP 1/16" x 3/8" 1/16" x 1/2" 1/8" x 1/4" 1/8" x 3/8" 1/8" x 1/2" 3/16" X 1/4" 3/16" X 3/8" 3/16" X 1/2" 1/4" X 3/8" 1/4" X 1/2" 1/4" X 3/4" 3/8" X 1/2" 3/8" X 3/4" 1/2" X 1/2" 1/2" X 3/4" BLACK No. 6216 CLOSED CELL SPONGE NEOPRENE OIL RESISTANT, LOW WATER ABSORPTION TEMPERATURE RANGE: -70 F TO +250 F (-57 C TO +121 C) o o o o OTHER SIZES/COLOURS, SPECIAL ORDER: CONTACT OFFICE www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 32
WEATHERSTRIP KERF MOUNTED 1 19/32" [40.5mm] 19/32" [15.1mm] 31/32" [24.6mm] 5/8" [15.9mm] 15/32" [11.9mm] 9/16" [14.3mm] 3/32" [2.4mm] 3/8" [9.5mm] W-28 W-29 CLEAR ANODIZED ALUMINUM AND SEAMLESS SANTOPRENE ELASTOMERIC SKIN SEAL (BLACK, BROWN OR WHITE) KERF MOUNTED SEAMLESS SANTOPRENE ELOSTOMERIC SKIN SEAL AVAILABLE IN BLACK, BROWN OR WHITE KERF MOUNTED 3/8" [9.5mm] 11/32" [8.7mm] NEW 3/16" [4.8mm] 15/32" [11.9mm] 1/16" [1.6mm] 3/32" [2.4mm] 1/8" [3.2mm] 1/4" [6.4mm] NEW 1/4" [6.4mm] W-31 W-87P KERF MOUNTED PILE WEATHERSTRIP KERF MOUNTED SEAMLESS SANTOPRENE ELOSTOMERIC SKIN SEAL AVAILABLE IN BLACK, BROWN OR WHITE 9/32" [7.1mm] 2 1/2" [63.5mm] 5/8" [15.9mm] DRIP CAP 13/32" [10.3mm] 1 7/32" [31mm] 5/32" [4mm] W-3 CLEAR ANODIZED ALUMINUM W-88N EXTRUDED ALUMINUM WITH NEOPRENE INSERT. ALSO AVAILABLE WITH PILE INSERT: W-88P www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 33
SPRING LOADED AND ADJUSTABLE WEATHERSTRIP ADJUSTING RANGE 1/4" [6.4mm] ADJUSTING RANGE 1/4" [6.4mm] 1 1/4" [31.8mm] 9/16" [14.3mm] 1 5/32" [29.4mm] 1/2" [12.7mm] CLASSIFIED UL W- 42 ADJUSTABLE PERIMETER SEAL CLEAR ANODIZED EXTRUDED ALUMINUM & NEOPRENE THIS SEAL SHOULD BE INSTALLED WITH THE ADJUSTMENT AT THE MIDPOINT TO ALLOW FOR FURTHER ADJUSTMENT R C W- 43 SPRING LOADED ADJUSTABLE PERIMETER SEAL CLEAR ANODIZED EXTRUDED ALUMINUM & PILE ADJUSTING RANGE 1/4" [6.4mm] ADJUSTING RANGE 1/4" [6.4mm] 9/16" [14.3mm] 1 1/8" [28.6mm] 9/16" [14.3mm] 1 5/32" [29.4mm] 13/16" [20.6mm] CLASSIFIED UL W- 45 SPRING LOADED ADJUSTABLE PERIMETER SEAL CLEAR ANODIZED EXTRUDED ALUMINUM & CLOSED CELL NEOPRENE R W- 44 SPRING LOADED ADJUSTABLE PERIMETER SEAL CLEAR ANODIZED EXTRUDED ALUMINUM & VINYL C ADJUSTING RANGE 1/4" [6.4mm] 1 1/4" [31.8mm] 13/16" [20.6mm] CLASSIFIED UL W- 48 SPRING LOADED ADJUSTABLE PERIMETER SEAL CLEAR ANODIZED EXTRUDED ALUMINUM & CLOSED CELL NEOPRENE R C www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 34
SPRING LOADED AND ADJUSTABLE ASTRAGALS ADJUSTING RANGE 1/2" [12.7mm] ADJUSTING RANGE 1/2" [12.7mm] 9/16" [14.3mm] 9/16" [14.3mm] 1-5/32" [29.4mm] 1-5/32" [29.4mm] W- 40P SPRING LOADED ADJUSTABLE ASTRAGAL CLEAR ANODIZED EXTRUDED ALUMINUM & PILE W- 40 SPRING LOADED ADJUSTABLE ASTRAGAL CLEAR ANODIZED EXTRUDED ALUMINUM MAXIMUM DISTANCE BETWEEN DOORS 1/2" [12.7mm] 5/8" ADJUSTING RANGE 1/2" [12.7mm] 1-1/8" [28.6mm] [15.9mm] 9/16" [14.3mm] 1-5/32" [29.4mm] NEW W- 40V SPRING LOADED ADJUSTABLE ASTRAGAL CLEAR ANODIZED EXTRUDED ALUMINUM & VINYL W- 40M MAGNETIC ASTRAGAL CLEAR ANODIZED EXTRUDED ALUMINUM -PROVIDED AS TWO PIECE SET ADJUSTING RANGE 1/8" TO 3/8" [3.2 TO 9.5 mm] 7/8" [22.2mm] 9/16" [14.3mm] W- 41 SPRING LOADED MORTISED ASTRAGAL CLEAR ANODIZED EXTRUDED ALUMINUM & PILE www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 35
ASTRAGALS 1 5/16" [33.3mm] 1 7/16" [36.5mm] 1" [25.4mm] 7/8" [22.2mm] LISTED 7/32" [5.6mm] 1/4" [6.4mm] W-5 W-25 CLEAR ANODIZED ALUMINUM AND VINYL CLEAR ANODIZED ALUMINUM AND NYLON BRUSH 1 3/4" [44.5mm] 2 1/2" [63.5mm] 3/16" [4.8mm] 1/8" [3.2mm] JAMB DOOR 3/16" [4.8mm] CLASSIFIED UL NEW W-8 R C EXTRUDED ALUMINUM W-8P W-8SL W-7 SECURITY ASTRAGAL PRIMED C.R. STEEL c/w SECURITY SLEEVE EXTRUDED ALUMINUM WITH PILE EXTRUDED ALUMINUM WITH SILICONE 1 3/4" [44.5mm] 1 3/4" [44.5mm] 1/8" [3.2mm] 1" 7/32" [5.6mm] [25.4mm] (Optional: Neoprene Seal) W-8S C.R. STEEL WITH CONDITIONED EDGES W-9 W-9S W-8SP AS ABOVE, PRIMED FINISH W-8SS STAINLESS STEEL, SEE PG. 20 EXTRUDED ALUMINUM WITH PILE EXTRUDED ALUMINUM WITH SILICONE www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 36
KNC SOUND CONTROL SYSTEM SEALED DOOR STC 30 40 THRESHOLD AUTOMATIC DOOR BOTTOM GASKET/SEAL 50 60 CT-70 CT-71 CT-72 CT-71 CT-50 CT-50 CT-50 CT-51 W-45 W-18 W-15 W-13 30 30 30 30 39 40 39 38 43 43 41 42 46 44 41 44 1/2" [12.7mm] CT-70 1/4" [6.4mm] 5" [127mm] LISTED EXTRUDED ALUMINUM & VINYL NEOPRENE 1" [25.4mm] 1/2" [12.7mm] CT-71 4" [101.6mm] EXTRUDED ALUMINUM & NEOPRENE 1/2" [12.7mm] CT-72 1/4" [6.4mm] 5" [127mm] LISTED EXTRUDED ALUMINUM & NEOPRENE www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 37
KNC SOUND CONTROL SYSTEM 9/16" [14.3mm] 17/32" [13.5mm] 1 13/16" [46mm] 1 1/2" [38.1mm] CT-51 EXTRUDED ANODIZED ALUMINUM & NEOPRENE SEAL OR FELT INSERT 5/16" LISTED [7.9mm] 5/8" Max. Drop 5/8" Max. Drop CT-50 1 3/16" [30.2mm] EXTRUDED ANODIZED ALUMINUM & NEOPRENE SEAL OR FELT INSERT 1 1/2" [38.1mm] 1 17/32" [38.9 mm] 1" [25.4mm] 1 1/4" [31.8mm] 7/16" [11.1mm] 3/8" [9.5mm] 3/16" [4.8mm] 5/32" [4mm] W-15 CLEAR ANODIZED ALUMINUM AND CLOSED CELL NEOPRENE W-13 CLEAR ANODIZED ALUMINUM AND CLOSED CELL NEOPRENE LISTED LISTED ADJUSTING RANGE 1/4" [6.4mm] 9/16" [14.3mm] 1 1/8" [28.6mm] 1 7/16" [36.5mm] 1" 1" [25.4mm] 13/16"" [20.6mm] 1/4" [6.4mm] 3/16" [4.8mm] CLASSIFIED UL W- 45 SPRING LOADED ADJUSTABLE PERIMETER SEAL CLEAR ANODIZED EXTRUDED ALUMINUM & CLOSED CELL NEOPRENE R C W-18 CLEAR ANODIZED ALUMINUM AND CLOSED CELL NEOPRENE LISTED www.kncrowder.com A PRODUCT OF K. N. CROWDER MFG. INC. 38
INDEX PRODUCT # PAGE# PRODUCT# PAGE# PRODUCT # PAGE# CT-1 CT-10 CT-100 CT-101 CT-103 CT-104 CT-106 CT-10SS CT-11 CT-12 CT-16 CT-175 CT-20/3 CT-20/3A CT-20/4 CT-20/4A CT-20/5 CT-20/5A CT-21/2 CT-21/2A CT-21/3 CT-21/3A CT-21/4 CT-21/4A CT-21/5 CT-21/5A CT-22/138 CT-22/138A CT-22/3 CT-22/34A CT-22/3A CT-22/4 CT-22/4A CT-227 CT-23 CT-27 CT-31 CT-32 CT-36 CT-39 CT-406 CT-407 CT-408 CT-409 CT-40N CT-40P CT-40S CT-410 CT-410-2 CT-41-1 CT-42-1 CT-43-1 CT-44 CT-44-1 CT-45 CT-45-1 CT-46 CT-47 CT-47-1 CT-47-1S CT-47S CT-48 CT-48S CT-49 CT-49-1 CT-49S CT-50 CT-50F 16 9 17 17 17 17 17 20 9 9 16 17 18 18 18 18 18 18 19 19 19 19 19 19 19 19 18 18 18 18 18 18 CT-51 CT-51F CT-52 CT-52B CT-52F CT-52S CT-52SS CT-53 CT-53B CT-53F CT-53S CT-54 CT-54N CT-55 CT-60 CT-61 CT-610 CT-611 CT-612 CT-64 CT-65 CT-66 CT-67 CT-68 CT-69 CT-70 CT-704 CT-705 CT-706 CT-71 CT-72 CT-730 CT-74 CT-745 CT-746 CT-747 CT-748 CT-75 CT-76 CT-80 CT-804 CT-805 CT-806 CT-807 CT-808 CT-81 CT-83 CT-86 CT-87 CT-9 CT-909 CT-910 CT-911 CT-912 CT-913 CT-914 CT-915 CT-916 CT-94 CT-95 CT-9SS 22 &38 W-8 W-8P W-8S W-8SP W-8SS W-9 W-11 W-13 W-13S W-13S-2 W-13S-SS W-13SS W-14 W-15 W-16N W-16P W-16S W-16V W-17N W-17S W-18 W-19 W-20N W-20P W-20S W-21 W-22 W-23 W-24S W-25 W-25S W-26-1 W-26-2 W-26-3 W-27 W-28 W-29 W-31 W-32N W-32P W-32S W-33S W-34S W-35-1 W-35-2 W-35-3 W-37-1 W-38S W-40 W-40M W-40P W-40V W-41 W-42 W-43 W-44 W-45 W-47 W-47S W-48 W-49 W-50S W-61 W-66 W-87P W-88N W-88P 6216 36 36 36 36 22 23 23 23 23 20 23 23 23 23 24 24 25 16 16 6 6 6 6 6 6 6 6 6 37 8 8 8 37 37 24 12 25 25 25 25 12 12 12 8 8 8 8 8 12 12 12 12 9 10 10 10 10 10 10 10 10 16 16 20 20 & 36 36 26 28 & 38 26 26 20 20 28 28 & 38 29 29 29 29 29 29 30 & 38 26 30 30 30 32 32 27 & 30 27 36 27 27 27 27 30 33 33 33 31 31 31 27 27 27 27 27 27 26 35 35 35 35 35 34 34 34 17 & 18 19 17 & 18 19 16 9 16 16 14 14 14 14 7 & 11 7 & 11 7& 11 14 14 13 & 14 13 & 14 13 & 14 14 13 & 14 14 13 & 14 14 15 13 13 15 15 15 15 13 15 34 & 38 31 31 34 31 31 31 32 33 33 33 32 W-1 & W-1F W-2 & W-2F W-3 W-4 W-5 W-6 28 28 33 26 36 28 22 & 38 22 www.kncrowder.com 100% CANADIAN OWNED AND OPERATED 39