Energy and the Environment

1. Energy and the Environment Fall 2012 Instructor: Xiaodong Chu Email：chuxd@sdu.edu.cn Office Tel.: 81696127

2. Flashbacks of Last Lecture • The Rankine cycle • The Rankine cycle is a steam cycle by “burning” fuel to generate mechanical power; for instance, in a steam power plant, fuel mixed with air is burned to heat water in a boiler to convert to steam, which then powers a turbine • In an efficient steam plant, nearly all the fuel’s heating value is transferred to the boiler fluid, but of course only part of that amount is converted to turbine work

3. Flashbacks of Last Lecture • The Brayton cycle • The Brayton cycle is associated with gas turbine that can be used for aircraft propulsive engine, naval vessel propulsion, high-speed locomotives, and electric power production • Thesimplest gas turbine plant consists of a compressor and turbine in tandem attached to the shaft that delivers mechanical power, and a combustion chamber is situated between the compressor and turbine

4. Flashbacks of Last Lecture • Combined Brayton and Rankine cycle • The combustion products gas stream leaving the gas turbine carries with it portion of the fuel heating value that was not converted to work, which may be used to generate steam in a boiler and produce additional work without requiring the burning of more fuel • The use of a gas turbine and steam plant to produce more work from a given amount of fuel than either alone could produce is called a combined cycle

5. Thermodynamic Principles: Ideal Heat Engine Cycles • The Otto cycle (奥托循环) • The Otto cycle is associated with fossil-fueled engine (reciprocating internal combustion engine (ICE)) (往复式内燃机) in the automobile, which does not depend upon heat transfer to the working fluid from an external combustion source • The fuel is burned adiabatically inside the engine, and the products of combustion produce more work during the expansion stroke (膨胀行程) than that is invested in the compression strokestroke (压缩行程), giving a net power output • The combustion products exhausted to the atmosphere are replaced by a fresh air-fuel charge to start the next cycle, which is termed an open cycle

6. Thermodynamic Principles: Ideal Heat Engine Cycles

7. Thermodynamic Principles: Ideal Heat Engine Cycles • Multiple-cylinder design to prevent the engine from running jerkily

8. Thermodynamic Principles: Ideal Heat Engine Cycles • The net cyclic work, equivalent heat added, and thermodynamic efficiency for the Otto cycle are

9. Thermodynamic Principles: Ideal Heat Engine Cycles • The Otto cycle efficiency is a monotonically increasing function of the volumetric compression ratio and the thermodynamic properties of the working fluid • In gasoline engines, the compression ratio is limited by the tendency of the fuel-air mixture to combust spontaneously; in diesel engines, a higher compression ratio is available since the fuel is injected after the air is compressed

10. Thermodynamic Principles: Ideal Heat Engine Cycles • For the Otto cycle, the amount of equivalent heat is limited by the amount of fuel that can be burned in the fuel-air charge in the cylinder at the end of the compression stroke • The combustible fuel is maximum when the air/fuel ratio is stoichiometric • The maximum temperature at the end of combustion is the adiabatic combustion temperature of the compressed mixture in the cylinder • The thermodynamic efficiencies of automobile engines are less than the ideal efficiency of the Otto cycle (the best thermal efficiencies are about 28% and 39% for the gasoline and diesel engine, respectively) • Friction of pistons and bearing • Power required to operate valves, cooling pump, and the fuel supply system • Pressure losses in intake and exhaust systems • Heat loss to the cylinder during the power strokes

11. Thermodynamic Principles: The Vapor Compression Cycle • The vapor compression cycle(蒸气压缩循环)is the use of mechanical power to move heat from a lower temperature source to a higher temperature sink • Refrigerators • Air conditioners • Heat pumps • The process is the reverse of a heat engine in that power is absorbed rather than being produced, but it still observes the restrictions of the first and second laws of thermodynamics

12. Thermodynamic Principles: The Vapor Compression Cycle • Reversed Carnot cycle • The cyclic refrigeration device operating between two constant temperature reservoirs and the T-s diagram for the working fluid when the reversed Carnot cycle is used. • Recall that in the Carnot cycle heat transfers take place at constant temperature

13. Thermodynamic Principles: The Vapor Compression Cycle

14. Thermodynamic Principles: The Vapor Compression Cycle • The refrigeration equipment consists of an evaporator (蒸发器), a vapor compressor(蒸气压缩机), a condenser(冷凝器), and a capillarytube(毛细管) connected in series in a piping loop filled with the refrigerant fluid(制冷液) • The refrigerant undergoes a change of phase between liquid and vapor at the temperatures and pressures within the system • The fluid flows through these components, being propelled by the pump • The functioning of the capillary tube is to reduce the pressure and temperature of the refrigerant fluid flowing from the condenser to the evaporator

15. Thermodynamic Principles: The Vapor Compression Cycle • For refrigerators and air conditioner, the desired output (heat removed from the refrigerated space) is not necessarily less than the input ( compressor work), of which the ratio is called the coefficient performance (COP) (性能系数) • The work required to compress a unit mass of refrigerant equals its change in its enthalpy (1->2) and the heat absorbed by the refrigerant from the refrigerated space is equal to its change in enthalpy (5->1) equaling that of (4->1)

16. Thermodynamic Principles: The Vapor Compression Cycle • A heat pump is a refrigerator operating in reverse • It delivers heat to an enclosed space by transferring it from environment having a lower temperature • Heat pumps are commonly used to provide used to provide wintertime space heating in climates where there is need for summertime air conditioning for which the same refrigeration unit is used for both purposes by redirecting the flow of air (or other heat transfer fluid) between the condenser and evaporator • The coefficient of performance is defined as which is always greater than unity

17. Thermodynamic Principles: The Vapor Compression Cycle • COP of the reversed Carnot cycle • Refrigerator • Heat pump