1 / 11

Thermocouples

Thermocouples. Most frequently used method to measure temperatures with an electrical output signal. What are thermocouples?.

koko
Download Presentation

Thermocouples

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Thermocouples Most frequently used method to measure temperatures with an electrical output signal.

  2. What are thermocouples? • Thermocouples operate under the principle that a circuit made by connecting two dissimilar metals produces a measurable voltage (emf-electromotive force) when a temperature gradient is imposed between one end and the other. • They are inexpensive, small, rugged and accurate when used with an understanding of their peculiarities.

  3. Thermocouples Principle of Operation • In, 1821 T. J. Seebeck observed the existence of an electromotive force (EMF) at the junction formed between two dissimilar metals (Seebeck effect). • Seebeck effect is actually the combined result of two other phenomena, Thomson and Peltier effects. • Thomson observed the existence of an EMF due to the contact of two dissimilar metals at the junction temperature. • Peltier discovered that temperature gradients along conductors in a circuit generate an EMF. • The Thomson effect is normally much smaller than the Peltier effect.

  4. Let’s take a look at this circuit

  5. How thermocouples work • It is generally reasonable to assume that the emf is generated in the wires, not in the junction. The signal is generated when dT/dx is not zero. • When the materials are homogeneous, e, the thermoelectric power, is a function of temperature only. • Two wires begin and end at the same two temperatures. Generally, a second order Eqn. is used.

  6. Material EMF versus Temperature With reference to the characteristics of pure Platinum Chromel Iron emf Copper Platinum-Rhodium Alumel Constantan Temperature

  7. Thermocouple Effect • Any time a pair of dissimilar wires is joined to make a circuit and a thermal gradient is imposed, an emf voltage will be generated. • Twisted, soldered or welded junctions are acceptable. Welding is most common. • Keep weld bead or solder bead diameter within 10-15% of wire diameter • Welding is generally quicker than soldering but both are equally acceptable • Voltage or EMF produced depends on: • Types of materials used • Temperature difference between the measuring junction and the reference junction

  8. Thermocouple Tables (EMF-Temperature) • Thermocouple tables correlate temperature to emf voltage. • Need to keep in mind that the thermocouple tables provide a voltage value with respect to a reference temperature. Usually the reference temperature is 0°C. If your reference junction is not at 0°C, a correction must be applied using the law of intermediate temperatures.

  9. Reference Temperature Systems and Zone Boxes • Ice Baths • Accurate and inexpensive • Electronically Controlled References • Require periodic calibration and are generally not as stable as ice baths, but are more convenient.

  10. Zone boxes • A zone of uniform temperature that insures all connections made within the zone are at the same temperature.

  11. What thermocouple materials should be used? • Depends on requirements: • Temperature range? • Required accuracy • Chemical resistance issues • Abrasion or vibration resistance • Installation requirements (size of wire) • Thermal conduction requirements

More Related