340 likes | 508 Views
Station Cards. Station Cards. 16SLI/8SLI 8SLI board : 8 station ports 16SLI board : 16 station ports Power Fail Transfer path support 16/DLI/8DLI 16DLI board : 16 station ports and 1B+D 8DLI board : 8 station ports and 2B+D Limited up to 8 station for Large LCD Phone per cards 8HYB
E N D
Station Cards • 16SLI/8SLI • 8SLI board : 8 station ports • 16SLI board : 16 station ports • Power Fail Transfer path support • 16/DLI/8DLI • 16DLI board : 16 station ports and 1B+D • 8DLI board : 8 station ports and 2B+D • Limited up to 8 station for Large LCD Phone per cards • 8HYB • 16 ports support • 8SLI + 8DLI • 4WLI • 4port WBS24( Wireless LAN) • 16channel simultaneous callper WBS24 • Limited up to 3 c ards • allocated 12 power units
Station Cards Distance Between Stations and the System
16SLI/8SLI Cards 16SLI
16SLI/8SLI Cards Connecting to the 16SLI Board P1 through~ P8 (RJ-45) P1 port Ports from P2 to P8
P1 P2 P3 P4 P1 P2 P3 P4 P5 P6 P7 P8 P5 P6 P7 P8 8SLI 16SLI/8SLI Cards 8SLI
16SLI/8SLI Cards Connecting to the 8SLI Board P1 through~ P8 (RJ-45) P1 port Ports from P2 to P8
1 5 4 2 Power Fail Transfer
16DLI/8DLI Cards 16/8DLI
16DLI/8DLI Cards Connecting to the 16DLI/8DLI Board P1 through~ P8 (RJ-45) 16DLI port 8DLI port
8HYB Cards 8HYB
8HYB cards Connecting to the 8HYB Board P1 through~ P8 (RJ-45) 8HYB port
4WLI card • Major Functions • Voice decompression : G.711 • Wireless specification : 802.11b WLAN • Specifications • Up to four APs(WBS24). • Simultaneous calling through up to four channels per WBS24. • The maximum number of mobile station subscribers is 120.
4WLI card Wiring Between 4WLI and WBS24
WIM Cards • Major Functions • Inter-works with dedicated lines using V.35. • Provides the Ethernet port of 10Base-T/100Base-Tx that inter-works with the xDSL or cable modem. • Provides the Ethernet port of 10Base-T for backup. • Offers the DeMilitarized Zone(DMZ) service. • Provides the Ethernet port of 10Base-T/100Base-Tx for the LAN interface. • Provides applications such as a firewall and VPN • Provides the UART port for configuration setting
WIM Cards • The Method of LAN port connection • Managed LIM : Slot2 LIM with WIM • Unmanaged LIM : Slot 3,4,5 Set jumpers JP1 through JP4 • Using the Ethernet port of the front panel, • Through back panel, connect with the LIM board of slot 2.
WIMD WIM Cards • WIMD for using VPN Function • Default
WIM Cards Connecting Boards to Ethernet RJ-45 port • WIM board-DMZ, LAN, WAN1 and WAN2 port • LIM board-all ports(P1 through P16) • 4DSL board-Up Link port (P8) • MCP and MGI boards-LAN port
LIM Cards • 16 port 10/100Base-T support • Each port support 2 LEDs • - Left is 10/100 speed LED ( On : 100 speed) • - Right is a Link & Data LED ( On : link OK, Filker : Data communication)
4DSL cards VDSL modem LIM card
4DSL cards • QAM VDSL • IP based DSLAM • Up to 300m • - Downlink stream to modem 30Mbps • - Uplink stream from modem 10Mbps • Up to 1Km • - Downlink stream to modem 20Mbps • - Uplink stream from modem 2Mbps RJ-45 port P1 ~ P4
IP Based UMS LAN MGI card PSTN CID Customer OfficeServ IP UMS Server Internet Personal PC • - Auto Attendance • - Voice Mail Function - 1 • ( Record, Listening, Download, Call Back ) • - Voice Mail Function - 2 • ( Record during conversations ) • - Voice Mail Function - 3 • ( Memo ) • - E-Mail Sending Function • - TTS( Text to Speech Function) • E-Mail Server
Earthing Strategy • Good quality earth required for proper system operation • 2 Strategies available • Using the power earth supplied by AC cable • Used in Each country • Running a separate bonded earth • Earth terminals provided on LHS of each cabinet • Follow local earthing policy
Rack Mounting Installation Required Tools
Power Up Procedure • Power system commencing with Main rack followed by each additional rack. • Check LEDs PSU ( AC LED and DC LED ) • Check LEDs on MCP card to MCP card is booting (MP LED ON) • confirm correct operation on other Cards with LEDs • After correct operation is confirmed connect station equipment tails. • Note: When the system is first turned on connected keysets LCDs will remain blank for up to 2 minutes until power is allocated to the DLI cards by the operating system