What Is The Difference Between Inductors And Transformers - Miracle Electronics

1. WhatIsTheDifferenceBetweenInductors And Transformers – MiracleElectronics Although for a layman, transformers and inductors seem to be the same in appearance and construction, but those in the field dealing with these equipment know that the two devices are similar, but not the same. They differ in applications, and also have their own unique design and construction. This blog will give you detailed information about these differences so that you are no more in the belief of the myth of both transformers and inductors being the same. After reading the blog, when you understand the difference between the two, and decide on using any one of them for your application, you can approach Miracle Electronics, the leading transformer and inductor coil manufacturer in India, who can serve almost every electronic purpose for your variedapplications. Inductors Inductors are passive tow-terminal electrical components that have electrical conducting wires woundintoacoil.Whencurrentflowsthroughaninductor,ittemporarilystorestheenergyin the coil’s magnetic field; and when the current flowing through is altered, voltage is created. The magnetic core around which the wire is wound is made up of iron or ferrite that increases the magnetic field and creates inductance. The inductance of an inductor can be calculated as the ratio of voltage to the rate of current change; and is depicted in the units of Henry(H).

2. Inductors range from 1H to 10H in value. Inductors are used in AC electronic equipment to block AC while allowing DC topass. Transformers Transformers consist of two coils of insulated wires that are wound around an iron core. One coil, called the primary, is connected to an input source of AC that produces constantly varying magnetic field around the coil, which in turn produces an AC in the other coil, known as the secondary,whichisconnectedtoaseparateelectriccircuittogiveanoutput.Theratioofthe number of turns in the primary to the number of turns in the secondary, which is known as the “turns ratio”, determines the ratio of voltages in the two coils. Transformers with more turns in thesecondaryascomparedtoprimaryarestep-uptransformers;andthosewithmoreturnsin the primary are step-down transformers. The ratio of the amperage or electric current strength in the two coils is inversely proportional to the ratio of the voltages. This makes the electric power (voltage x amperage) same in both the coils. At Miracle Electronics, the best transformer and inductor coil manufacturer in India, you get all sorts of transformers and inductors for your applications. The transformers manufactured include power, toroidal, three phase, SMPS, UI, EI, medical isolation, audio output, and audio line matching. Additionally, you can get the best-in-class inductors that have the highest common mode impedance over the widest frequency range. These inductors have no air gap, superior quality wiring, low electromagnetic radiation, and low noise production. You can use these inductors for any application requiring a high DC current bias likeSMPS. For more information, please visit: MiracleElectronics