1 / 19

PHYSICS 231 Lecture 27: Heat & Heat exchange

PHYSICS 231 Lecture 27: Heat & Heat exchange. Remco Zegers Walk-in hour: Thursday 11:30-13:30 am Helproom. Problems in the book for extra practice. 8: 39, 41, 47, 51 9: 5, 13, 19, 26, 27, 40, 43, 55 10: 9, 13, 29, 31, 37, 42 11: 1,4,13,21,33. Internal energy.

lahela
Download Presentation

PHYSICS 231 Lecture 27: Heat & Heat exchange

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PHYSICS 231Lecture 27: Heat & Heat exchange Remco Zegers Walk-in hour: Thursday 11:30-13:30 am Helproom PHY 231

  2. Problems in the book for extra practice 8: 39, 41, 47, 51 9: 5, 13, 19, 26, 27, 40, 43, 55 10: 9, 13, 29, 31, 37, 42 11: 1,4,13,21,33 PHY 231

  3. Internal energy In chapter 10: The internal (total) energy for an ideal gas is the total kinetic energy of the atoms/particles in a gas. • For a non-ideal gas: the internal energy is due to kinetic • and potential energy associated with: • translational motion • rotational motion • vibrational motion • intermolecular potential energy |PEideal gas=0| < |PEnon-ideal gas| < |PEliquid| < |PEsolid| PE PE: negative! R PHY 231

  4. Heat Heat:The transfer of energy between objects because their temperatures are different. Heat: energy transfer Symbol: Q Units: Calorie (cal) or Joule (J) 1 cal = 4.186 J (energy needed to raise 1g of water by 10C) PHY 231

  5. Heat transfer to an object The amount of energy transfer Q to an object with mass m when its temperature is raised by T: Q=cmT Change in temperature Mass of object Energy transfer (J or cal) Specific heat (J/(kgoC) or cal/(goC) PHY 231

  6. Example A 1 kg block of Copper is raised in temperature by 10oC. What was the heat transfer Q.? PHY 231

  7. Another one A block of Copper is dropped from a height of 10 m. Assuming that all the potential energy is transferred into internal energy (heat) when it hits the ground, what is the raise in temperature of the block (ccopper=387 J/(kgoC))? PHY 231

  8. Calorimetry If we connect two objects with different temperature energy will transferred from the hotter to the cooler one until their temperatures are the same. If the system is isolated: Qcold=-Qhot mcoldccold(Tfinal-Tcold)=-mhotchot(Tfinal-Thot) the final temperature is: Tfinal= mcoldccoldTcold+mhotchotThot mcoldccold+mhotchot PHY 231

  9. An example The contents of a can of soda (0.33 kg) which is cooled to 4oC is poured into a glass (0.1 kg) that is at room temperature (200C). What will the temperature of the filled glass be after it has reached full equilibrium (glass and liquid have the same temperature)? Given cwater=4186 J/(kgoC) and cglass=837 J/(kg0C) PHY 231

  10. And another A block of unknown substance with a mass of 8 kg, initially at T=280K is thermally connect to a block of copper (5 kg) that is at T=320 K (ccopper=0.093 cal/g0C). After the system has reached thermal equilibrium the temperature T equals 290oC. What is the specific heat of the unknown material in cal/goC? copper ???? PHY 231

  11. Demo: heating water with a ball of Lead A ball of Lead at T=100oC with mass 300 g is dropped in a glass of water (0.3 L) at T=200C. What is the final (after thermal equilibrium has occurred) temperature of the system? (cwater=1 cal/goC, clead=0.03 cal/goC water=103kg/m3) PHY 231

  12. Phase Change Q=cgasmT Q=csolidmT Solid (low T) GAS(high T) liquid  solid Gas  liquid liquid (medium T) Q=cliquidmT PHY 231

  13. Gas  liquid Phase change When heat is added to a liquid, potential energy goes to 0 (the energy stored in the stickiness of the liquid is taken away) DURING THE CHANGE FROM LIQUID TO GAS, THE KINETIC ENERGY DOES NOT CHANGE AND SO THE TEMPERATURE DOES NOT CHANGE. ALL ADDED HEAT GOES TO CHANGING PE When heat is taken from a gas, potential energy goes to the stickiness of the fluid DURING THE CHANGE FROM GAS TO LIQUID, THE KINETIC ENERGY DOES NOT CHANGE AND SO THE TEMPERATURE DOES NOT CHANGE. ALL REMOVED HEAT GOES TO CHANGING PE PHY 231

  14. liquid solid Phase change When heat is added to a solid to make a liquid, potential energy in the bonds between the atoms become less DURING THE CHANGE FROM SOLID TO LIQUID, THE KINETIC ENERGY DOES NOT CHANGE AND SO THE TEMPERATURE DOES NOT CHANGE. ALL ADDED HEAT GOES TO CHANGING PE When heat is taken from a liquid, the bonds between atoms becomes stronger (potential energy is more negative) DURING THE CHANGE FROM LIQUID TO SOLID, THE KINETIC ENERGY DOES NOT CHANGE AND SO THE TEMPERATURE DOES NOT CHANGE. ALL REMOVED HEAT GOES TO CHANGING PE PHY 231

  15. Okay, the Temperature does not change in a phase transition!But what is the amount of heat added to make the phase transition? Gas  liquid Qgasliquid=-MLv Qliquidgas=+MLv M:mass Lv=latent heat of vaporization (J/kg or cal/g) depends on material. Use the table 11.2 in the book for LON-CAPA PHY 231

  16. solid  liquid Qliquidsolid=-MLf Qsolidliquid=+MLf M:mass Lf=latent heat of fusion (J/kg or cal/g) depends on material. Use the table 11.2 in the book for LON-CAPA PHY 231

  17. Phase Change Q=cgasmT Q=csolidmT Solid (low T) GAS(high T) liquid  solid Gas  liquid Q=mLv liquid (medium T) Q=mLf Q=cliquidmT PHY 231

  18. PHY 231

  19. Ice with T=-30oC is heated to steam of T=1500C. How many heat (in cal) has been added in total? cice=0.5 cal/goC cwater=1.0 cal/goC csteam=0.480 cal/goC Lf=540 cal/g Lv=79.7 cal/g m=1 kg=1000g PHY 231

More Related