1 / 13

fischer technik ®

fischer technik ®. Interface Connections. The Serial Interface Connects the Computer. 02 04 06 08 01 03 05 07. with the fischer technik ® model. Interface. The 9V power supply connects here. The USB cable connects here. Motor Outputs. Motor Lamp Electromagnet

lalaine
Download Presentation

fischer technik ®

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. fischertechnik® Interface Connections

  2. The Serial Interface Connects the Computer 02 04 06 08 01 03 05 07 with thefischertechnik®model.

  3. Interface The 9V power supply connects here. The USB cable connects here.

  4. Motor Outputs Motor Lamp Electromagnet Buzzer Solenoid Valve Output devices connect at M1 – M4.

  5. Motor Lamp Electromagnet Buzzer Solenoid Valve Lamp Outputs One wire connects to the ground socket. Lamp Output devices connect at 01 – 08 with one wire.

  6. Digital Input Connections Pushbutton Switch (pressure sensor) Phototransistor (light sensor) Reed Switch (magnetic sensor) Digital Inputs connect at I1-I8.

  7. Analog Input Connections Thermistor (temperature sensor) Photocell (light sensor) Analog Input Devices connect at AX and AY.

  8. A Few Tips Building models is fun when they work. This is why you should follow a few basic rules • Work carefully. • Check the movement of all parts. • Use the interface test. • Before you start to write a program for a model, you should test all parts that are connected to the Interface, using the interface test from the ROBO Pro software.

  9. Interface Test

  10. Prog Button • Programs can be downloaded to the interface. • Two programs can be stored in the Flash memory. • Toggle between the two programs using the Prog Button.

  11. Port Button • This button can be used to toggle between the COM/USB or IR Ports. • The light remains solid once you’ve selected the port.

  12. Troubleshooting • Interface Test • Cables and Wiring • Loose Connection • Loose plugs • Poor contact between wire and plug • Short Circuits • Programming Errors

More Related