290 likes | 442 Views
Application. Since SP-030 has illumination capabilities, its applications are more varied It is more suited for installation at wharfs, on top of concrete bollards, and anywhere where lighting is necessary, but wiring is an issue. Operation .
E N D
Application • Since SP-030 has illumination capabilities, its applications are more varied • It is more suited for installation at wharfs, on top of concrete bollards, and anywhere where lighting is necessary, but wiring is an issue.
Operation • METEOR Bollards will operate at least 12 hours per day and require at least 6 hours of direct sunlight recharge. • Under extreme weather conditions, METEOR Bollards can operate for up to 3-4 days without recharging. • With an average 5-6 year lifespan (up to 10 years in the lab), the Li-Fe battery can be replaced easily during maintenance. For SP-010, 4 hour charging can last for 12 hour illumination., and fully charged Last 6 rainy days
Installation • Installing wired lights often cost the same, if not more, than the lights themselves. • Meteor solves this time consuming and costly installation process with it s no-wiring design.
Ultracapacitor & Battery Ultracapacitor Ultracapacitors were previously featured in our paver and ground lights due to their long lifespan. Hybrid Battery For our new bollards, we incorporate Li-Fe batteries which are not only more efficient but with higher capacity SANYO eneloop batteries SANYO eneloop batteries are the first to combine the environmental and cost saving benefits of rechargeable batteries Battery Solution
Power Management • With precise power management capabilities, Meteor will equip future bollard designs with microcontrollers (MCU) to serve performance-critical roles. • MCUs are also ideal for • Increasing efficiency of solar power • Increasing LED illumination efficiency • Extending battery life
LED Light Distribution Control Meteor controls LED beam spread using the following methods: 1. LED base- reflective angle control 2. Customized lens design Meteor customized lens LED base LED base reflective angle LED Chip
Before and After Final version First version Lumen : 9 lm Luminance: 12 lux (average) Lumen : 16.5 lm Luminance: 21 lux (average) P
Finish • Fluoropolymer coating is widely used in building exteriors, steel structures, aluminum surfaces, petrochemicals pipelines and vessels. • Excellent long lasting performance, 10-20 years. • Available in Dark Bronze, Black and Platinum Silver
Applications Meteor's solar solution enables bollard lights to be installed and used in off grid areas where marking walkways is important but impractical or inconvenient using normal installation methods.
New Products Solar Illuminating Bollard Series - Designed for effective lighting of pathways, driveways, etc. Features: - High-power LEDs provide a wide asymmetric distribution - No light above ninety degrees horizontal - Bollard housing and shaft are single- piece aluminum finished in fluoropolymer coating
Meteor' s Design Roadmap Solar Paver/Ground Light Solar LED Bollard /Post Light Solar Site / Area Light
SH-110 & SH-140Solar Paver Lights“without” Solar Panels June 2011
Rimmer Consulting Group21438 N 38th PlacePhoenix, AZ 85050Phone/Fax 480-629-8894www.rimmerlighting.com Thank you for your attention.