1 / 11

MQXFS Mechanical Interfaces (Proposed)

This document outlines the mechanical interfaces for the MQXFS assembly, including the magnet packaging envelope, pizza box connections, wiring, and connectors. It also provides information on the status and progress of the project.

lampert
Download Presentation

MQXFS Mechanical Interfaces (Proposed)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MQXFS Mechanical Interfaces(Proposed) Dan Cheng S. Kincaide, H. Felice, X. Wang 4/23/2015

  2. Outline • Magnet Packaging envelope & interfaces • Pizza box connections • Wiring & Connectors • Status MQXFS Mechanical Interfaces

  3. MQXFS Assembly MQXFS Mechanical Interfaces

  4. MQXFS Assembly Length Requirements 2158 mm 428 mm 355 mm* 180 mm 145 mm * Extended lead length due to CERN coils being produced with 375 mm long copper stabilizers instead of 2ndNbTi cable MQXFS Mechanical Interfaces

  5. MQXFS Assembly Diameter requirements 647 mm Guide Plate* 614 mm Dia. shell Connector can be oriented to line up with one of the 647 mm diameter lobes CERN-style shell SG connector on OD of shell, approximately ~15 mm proud in one location MQXFS Mechanical Interfaces

  6. *LQ Test Configuration Tri-lobed 647 mm dia. Guide Plate was used in the LQ tests MQXFS Mechanical Interfaces

  7. MQXFS Assembly Support Interface Typical ¾-10 tapped 4-hole pattern support interface HQ-style support ring and connector skirts MQXFS Mechanical Interfaces

  8. MQXFS Connection Box Design Splices (and CLIQ leads) will be made in two layers CLIQ leads (max. 3) Full-size cables shown Current leads MQXFS Mechanical Interfaces

  9. MQXFS Wire Routing All IL wires will pass thru wire guides underneath the axial endplates MQXFS Mechanical Interfaces

  10. MQXFS Wire Routing Wires from RE will be routed through wire guides in 1 or 2 cooling holes All wires will terminate in Hypertronics connectors on LE of magnet MQXFS Mechanical Interfaces

  11. Status • Pizza box connection box is currently being detailed • RFQs to be issued early May • Fabrications to be complete mid-June • Wiring & Connectors • Support rings & connector skirts need to be detailed • IL Wire guides design is complete • Real Coils are expected to arrive mid-May (CERN and BNL) MQXFS Mechanical Interfaces

More Related