1 / 20

Planet Guidelines

Planet Guidelines. January 3, 2011. Viewing Active Sites Only. Open the project, expand Groups and right-click on Totalphase1and2 and select view to select only the active sites.

landen
Download Presentation

Planet Guidelines

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Planet Guidelines January 3, 2011

  2. Viewing Active Sites Only Open the project, expand Groups and right-click on Totalphase1and2 andselect view to select only the active sites

  3. Right-click on the screen and select Layer Control to de-select SiteFile and the terrain and clutter • You can get a road map for the background by opening the following file: Users/NSN-Natee/MapInfo Layers/Vectors/(vad.tab, mdd.tab, DCWASHd.tab) depending on the city • Search for the candidate Setting up your Workspace

  4. Creating Groups • You need to create 3 groups if you are preparing a High Rent Justification • With candidate • Without candidate • With Baseline (Initial Design) candidate • Create a group, select the sites using marquee select and right click on the group and select Add selected Sectors and Repeaters (shown on next slide)

  5. Creating Groups

  6. Reclassing Clutter File • SelectGridMgr  ToolsReclass Numeric • Create a .grdand set all the class values to 5 except for Urban, Core Urban, Commercial Industrial and Airport. These four should be set to 0. Choose the color as shown in the screen shot. Then save the file as market_delta5db.

  7. Define and Run Network Analyses [1/4] Right Click LTE Analyses->New to add an analysis Click Next button for Sector Selection. Make sure the site group is selected properly. Give any appropriate name

  8. Define and Run Network Analyses [2/4] Run indoor and outdoor analysis separately

  9. Define and Run Network Analyses [3/4] Use the combined area of selected prediction option Use 25m resolution

  10. Default Settings • Go to LTE Analysis -> New -> Add the following layers. • To save time, you can select only the desired layers. In LS project, the following layers are needed • Best Server • RSRP • Downlink C/(N+I)

  11. Define and Run Network Analyses [4/4] Finally, at page Final Step click Finish button to execute the network analysis

  12. RSRP Plot (1/3) Note: the box for Z-unit has to be checked for each numerical grid used by grid calculator Using grid calculator to add RSRP indoor and Delta5dB and get a new grid called RSRP_indoor_105.grd • Open Indoor RSRP file in the Project Explorer to view it in the Grid Manager list • Go to “Info” on the Grid Manager and Check “Use the closest node Value” • Go to Analysis -> Calculator -> Add the RSRP indoor file & Delta5db.grd. Click ok (shown on next slide) • Save the .grd file in the RSRP folder as RSRP_indoor_105.grd Presentation / Author / Date

  13. RSRP Plot (2/3) Highlight the RSRP_105.grd file and click on Color (from previous slide) Load the appropriate legend

  14. RSRP Plot (4/4)

  15. Grid Manager Make sure you select this for all your .grd files Once the analysis is run, click on each of the Analysis Layers (i.e. RSRP, Best Server, Downlink CINR) in the project explorer so that it shows up on the grid manager

  16. Creating BS2 Using the Grid Mgr  Analysis  Grid Query, create a grid where RSRP >=-105dBm and DL CNIR is >= -2.5dB.

  17. Creating BS2 Create a Classified Grid. When true “Get value from” Best Server. When false use NULL. Name the resulting grid BS2 and press Finish.

  18. Best Server/serving sector plot

  19. Calculating the Pops Stats Open Analysis  Layer Statistics. Select AOI as analysis area. PresBS2s Add Layer and locate the grid file. Check Use Traffic and locate the traffic map created. Press “Calculate Statistics.”

  20. Pops Report by Sector Add pops data from sectors of the same site to get pops/site

More Related