1 / 10

Steady state thermal analysis in ASONIKA

Steady state thermal analysis in ASONIKA . Create a new project and specify the name of the new project. Select 3d model to import. Imported model. For the heater set the thermal condition: maintained temperature 300 deg.C.

latoya
Download Presentation

Steady state thermal analysis in ASONIKA

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Steady state thermal analysis in ASONIKA

  2. Create a new project and specify the name of the new project

  3. Select 3d model to import

  4. Imported model

  5. For the heater set the thermal condition: maintained temperature 300 deg.C

  6. For the opposite side of the model (lead-free solder end) set the following thermal condition: maintained temperature 27 deg.C

  7. Specify thermal conductivities for all parts of the model (aurum wire, lead-free solder and heater)

  8. Run automatic FE mesh generation procedure

  9. Select analysis type

  10. Results view: temperatures distribution

More Related