1 / 17

RECUPERATOR

RECUPERATOR. Established 1973. ENERGY OF THE FUTURE IS ALREADY HERE. 1973: Founded during first energy crisis 2007: New facility - Fully automated 2012: 50% Facility expansion. THE HEAT EXCHANGER. Recuperator factory at Rescaldina (Milano). THE HEAT EXCHANGER. FULLY AUTOMATED.

lavina
Download Presentation

RECUPERATOR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RECUPERATOR • Established1973 ENERGY OF THE FUTURE IS ALREADY HERE

  2. 1973: Founded during first energy crisis • 2007: New facility - Fully automated • 2012: 50% Facility expansion THE HEAT EXCHANGER Recuperator factory at Rescaldina (Milano)

  3. THE HEAT EXCHANGER FULLY AUTOMATED

  4. FASTEST DELIVERY THE HEAT EXCHANGER Delivery Area

  5. PRODUCTS • Plate Heat Exchangers • Series B, F, A • 7.8” to 94.9” single modules • Up to 100,000 CFM modules • 50 to 80% efficiency • Rotary Wheel Heat Exchangers • Series T • 19.7” to 90.5” diameters • Up to 14,000 CFM • 60 to 80% efficiency • Sensible and/or Latent heat exchange

  6. PLATE EXCHANGER FEATURES • Series B, F, A • 7.8” to 94.9” modules • Up to 100,000 CFM modules • Self-supporting design eliminates spacers • 50 to 80% efficiency • Folded, sealed and Crimped plate edges – very tight, stable alignment • Multitude of options

  7. MOST EFFICIENT LEAST PRESSURE DROP THE HEAT EXCHANGER • Exhaust Air • Temperature Distribution • Pressure Drop • Distribution Supply Air Temperature Distribution

  8. Plate Exchanger Materials & Treatments • Standard: Aircraft-grade Aluminum • Corrosion Resistant: Epoxy coated Aluminum • High Temperature: AISI 316L Stainless Steel

  9. Plate Exchanger Options Casing & End Plate Options: • TV: Painted casing • RF: Reinforced casing • AR: Galvanized end plates w/Slide-in corners • AE: Galvanized end plates w/Double fold for duct installation • AZ: Lightweight aluminum end plates

  10. Plate Exchanger Options Corner Profile Options: • CD: Slide-In slot • CS: Bevelled edge Sealing Options: • NS: No Silicone • SC: Extra sealant • XS: High pressure

  11. Plate Exchanger Options By-Pass Options: • BS: Lateral w/out damper • BP: Lateral w/damper • BZ: Central w/out damper • BC: Central w/damper • BB: Central w/damperand internal control

  12. Plate Exchanger Options By-Pass Options: • BV: Lateral w/damperand vertical blades • BM: Lateral w/single blade • BY: Lateral w/single internaldamper • BL: Lateral w/short damperand internal shaft • BD: Lateral w/internal control

  13. Plate Exchanger Installations

  14. Quality Case in Point • Columbia University • 150,000 CFM AHUs on laboratory • Engineer specified • 400°F, 10” w.c., < 1% leakage • Recuperator produced units / tests in 4 weeks • Certified at 400°F, 12” w.c. • 0.002% leakage overall! • 3 of 4 modules tested 0.000% - no reading! • Engineer has changed all specifications to Recuperator

  15. LABORATORY • Two computerized wind tunnels • Meet ASHRAE & Eurovent standards • Research & Development • Quality/Performance confirmation

  16. PRODUCT SELECTION SOFTWARE • REX: Design/Selection software • Designs plate/rotary heat exchangers • Generates technical data • Calculates performance data • Provides OEM Pricing • End user payback calculations • ReCamB: dll file for incorporation into AHU manufacturer’s software.

  17. RECUPERATOR • Recuperator USA • PO Box 10084 • Lancaster, PA 17605 • Tel: 717-299-5679 • Cell: 717-917-3635 • Email: Herr@RecuperatorUSA.com • www.RecuperatorUSA.com

More Related