1 / 22

Feedback Control Systems ( FCS )

Feedback Control Systems ( FCS ). Lecture-13 Mathematical Modelling of Liquid Level Systems . Dr. Imtiaz Hussain email: imtiaz.hussain@faculty.muet.edu.pk URL : http://imtiazhussainkalwar.weebly.com/. Laminar vs Turbulent Flow. Laminar Flow

leal
Download Presentation

Feedback Control Systems ( FCS )

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Feedback Control Systems (FCS) Lecture-13 Mathematical Modelling of Liquid Level Systems Dr. Imtiaz Hussain email: imtiaz.hussain@faculty.muet.edu.pk URL :http://imtiazhussainkalwar.weebly.com/

  2. Laminar vs Turbulent Flow • Laminar Flow • Flow dominated by viscosity forces is called laminar flow and is characterized by a smooth, parallel line motion of the fluid • Turbulent Flow • When inertia forces dominate, the flow is called turbulent flow and is characterized by an irregular motion of the fluid.

  3. Resistance of Liquid-Level Systems • Consider the flow through a short pipe connecting two tanks as shown in Figure. • Where H1 is the height (or level) of first tank, H2 is the height of second tank, R is the resistance in flow of liquid and Q is the flow rate.

  4. Resistance of Liquid-Level Systems • The resistance for liquid flow in such a pipe is defined as the change in the level difference necessary to cause a unit change inflow rate.

  5. Resistance in Laminar Flow • For laminar flow, the relationship between the steady-state flow rate and steady state height at the restriction is given by: • Where Q = steady-state liquid flow rate in m/s3 • Kl= constant in m/s2 • and H = steady-state height in m. • The resistance Rl is

  6. Capacitance of Liquid-Level Systems • The capacitance of a tank is defined to be the change in quantity of stored liquid necessary to cause a unity change in the height. • Capacitance (C) is cross sectional area (A) of the tank. h

  7. Capacitance of Liquid-Level Systems h

  8. Capacitance of Liquid-Level Systems h

  9. Modelling Example#1

  10. Modelling Example#1 • The rate of change in liquid stored in the tank is equal to the flow in minus flow out. • The resistance R may be written as • Rearranging equation (2) (1) (2) (3)

  11. Modelling Example#1 • Substitute qo in equation (3) • After simplifying above equation • Taking Laplace transform considering initial conditions to zero (1) (4)

  12. Modelling Example#1 • The transfer function can be obtained as

  13. Modelling Example#1 • The liquid level system considered here is analogous to the electrical and mechanical systems shown below.

  14. Modelling Example#2 • Consider the liquid level system shown in following Figure. In this system, two tanks interact. Find transfer function Q2(s)/Q(s).

  15. Modelling Example#2 • Tank 1 Pipe 1 • Tank 2 Pipe 2

  16. Modelling Example#2 • Tank 1 Pipe 1 • Tank 2 Pipe 2 • Re-arranging above equation

  17. Modelling Example#2 • Taking LT of both equations considering initial conditions to zero [i.e. h1(0)=h2(0)=0]. (1) (2)

  18. Modelling Example#2 (1) (2) • From Equation (1) • Substitute the expression of H1(s) into Equation (2), we get

  19. Modelling Example#2 • Using H2(s) = R2Q2 (s) in the above equation

  20. Modelling Example#3 • Write down the system differential equations.

  21. To download this lecture visit http://imtiazhussainkalwar.weebly.com/ End of Lectures-13

More Related