Introduction Of LED Tube Lights

1. How To Choose The Right Kind of LED Tube Lights? www.ledmyplace.com

2. Introduction LED Tube Lights having varied applications such as airports, malls, bus shelters, convenience stores, gas stations, hospitals, schools, homes, and offices has undoubtedly given the users the best kind of lighting experience. But, not all LED tube lights available in the market stand up to the expectations of consumers. Why? Because plenty of cheap LED tubes are doing the rounds owing to manufacturer’s want of more and more profits. And, that is why you must carefully study the products in order to make intelligent buying decisions. Let’s look at the following factors that influences user’s buying behavior. Lumen Output Many times, you will come across websites that carry images of LED tube lights that may get you lured. But, as an informed customer, do care to look at the total number of lumens that should tell you the level of brightness of the tube. Always compare the lumen output with the conventional light such as T8, T10 or T12 fluorescent tube as that will let you know how better it performs in comparison with the former. Higher the lumen output, higher is the level of brightness. Lumen/System Efficacy While you might think that LED tube lights with higher wattage might be a good option to consider but this alone doesn’t mean anything. Because, it’s the lumen efficacy which is more important where the lumen efficacy is obtained by dividing the total number of lumens by the total power consumed. Higher the lumen efficacy, higher will be the efficiency of the LED tube lights. www.ledmyplace.com

3. Ballast Compatibility As per the general opinion, LED tube lights as retrofits are always good. But, in case you didn’t know, even LED tube lights that are compatible with fluorescent tubes may not perform as well as the dedicated LED luminaires. And, this is because of the bad ballast or ballast factor. A bad ballast may cause flickering, delayed start-up, low light levels and non-uniform light levels and most importantly an increased power consumption. Henceforth, it’s important for you to check the ballast compatibility of LED tubes or at best, get LED tubes that can allow you to bypass the ballast. Bypassing the ballast leads to an improved performance. Heat Emission The LED tube lights as such are housed inside the rugged aluminium housing for optimal thermal management because heat is an important cause for lighting fixtures to stop working all of a sudden. While high quality LED luminaires may be better at heat management than the fluorescent tubes, most LED retrofits are not. The high temperatures cause the fixtures to perform poorly and as a result a shorter lifespan. So, you must be careful in selecting the right LED tube lights. Product Safety & Energy Efficiency It would be advisable to buy LEd tube lights that have UL certification as that is the guarantee for product safety and protection from fire or electrical hazards. Secondly, LED tube lights must also be DLC approved or certified for proof of quality LED luminaires. The products which are not approved by the DLC do not stand up to organization’s stringent quality standards or energy-efficiency. www.ledmyplace.com

4. Conclusion All in all, it might sound easy to make a product-purchasing decision but when it comes to LED tube lights, it really isn’t because of so many factors. So, make sure, cost should be your last consideration, when thinking of purchasing high quality LED tube lights. That said, even if you buy an expensive LED luminaire, your upfront cost can be easily covered in 1-2 years, else the more low-cost product it is, the more you spend on its maintenance and replacement later. www.ledmyplace.com

5. THANK YOU www.ledmyplace.com