1 / 13

Mobile Computing COE 446 Network Planning

Mobile Computing COE 446 Network Planning. Tarek Sheltami KFUPM CCSE COE http://faculty.kfupm.edu.sa/coe/tarek/coe446.htm. Principles of Wireless Networks K. Pahlavan and P. Krishnamurth. Outline. Signal to interference ratio calculation Capacity expansion techniques.

leila-marsh
Download Presentation

Mobile Computing COE 446 Network Planning

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Mobile Computing COE 446Network Planning Tarek Sheltami KFUPM CCSE COE http://faculty.kfupm.edu.sa/coe/tarek/coe446.htm Principles of Wireless Networks K. Pahlavan and P. Krishnamurth

  2. Outline • Signal to interference ratio calculation • Capacity expansion techniques

  3. Signal-to-Interference Ratio Calculation • The objective in a cellular radio system is to allocate the channels to cell within a cluster so that the distance between cochannels or adjacent channels is as large as possible • For urban land mobile ratio, the distance is power gradient is roughly 4 • The received signal strength falls as the fourth power distance • This further improves Sr

  4. Signal-to-Interference Ratio Calculation.. • If there are Js interfering BS surrounding a given BS then: Where d0: the distance of MT from a given BS and dn is the distance from the nth BS

  5. Sr as a function of frequency reuse factor, N

  6. Signal-to-Interference Ratio Calculation.. • Assuming that received signal falls as the fourth of the distance from land mobile radio, the path loss model will be: Pr(d) dB= Pt(dB) – (40 log d + 10 log K) • The factor 10 log K usually corresponds to the path loss at the first meter or kilometer, d is the distance • This model is appropriate for first cut approximations in system design

  7. Capacity Expansion Techniques • There are four methods: • Obtain additional spectrum to new MTs • Very simple, but expensive • Expand the capacity of a cellular network to change the cellular architecture: • This includes cell splitting, cell sectoring using directional antennas (Lee microcell zone technique) and using multiple reuse factors • These techniques do not need additional spectrum or any major changes in wireless modem or access techniques • One of the most practical and less expensive solutions to expand the network capacity

  8. Capacity Expansion Techniques.. • Change the frequency allocation methodology: • Non uniform distribution of the frequency bands among different cells according to their traffic need • Traffic load of each cell is dynamically changed by the geography of the service area with time depending of the traffic load • These techniques do not need any change in MTs or physical architecture of the system • Expand the network capacity by changing modem and access technology: • The most effective method

  9. Capacity Expansion Techniques.. • Cell industry started with analog FM modulation then TDMA and it is going to CDMA air interface using digital modems • Digital technology increases the network capacity and also provides a fertile environment for integration of voice and data services • This migration requires the user to purchase new MT and provider to install new components in the infrastructure

More Related