1 / 19

Lecture Objectives

Lecture Objectives. Discuss: Project 1 Diffuser modeling Ventilation effectiveness. outlet. inlet. outlet. T1=30C. T1. inlet. outlet. inlet. T2. T2=20C. Meshing (Project 1). Pat a) Numerical diffusion

leog
Download Presentation

Lecture Objectives

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture Objectives • Discuss: Project 1 • Diffuser modeling • Ventilation effectiveness

  2. outlet inlet outlet T1=30C T1 inlet outlet inlet T2 T2=20C Meshing (Project 1) Pat a) Numerical diffusion The purpose of this project part is to analyze how mesh size and orientation affects the accuracy of result.

  3. Concentration equation Conservation of mass of considered gas (chemical species): mgas=const mgas=C∙mair= C∙ρ∙dxdydz=const mgas,in mgas,out incompressible flow dy C=const dz dx Diffusion coefficient C – concentration of: H2O , VOC, CO, CO2 , and other gasses What about particles?

  4. InletsDiffuser Types Valve diffuser swirl diffusers ceiling diffuser wall or ceiling floor

  5. Diffuser Types Grill (side wall) diffusers Linear diffusers Vertical Horizontal one side

  6. Displacement ventilationdiffusers

  7. momentum sources Diffuser modeling Complex geometry - Δ~10-4m We can spend all our computing power for one small detail Momentum method

  8. Diffuser Modeling Fine mesh or box method for diffuser modeling

  9. IAQ parameters Number of ACH quantitative indicator ACH - for total air - for fresh air Ventilation effectiveness qualitative indicator takes into account air distribution in the space Exposure qualitative indicator takes into account air distribution and source position and intensity

  10. IAQ parameters • Age-of-air air-change effectiveness (EV) • Specific Contaminant Concentration contaminant removal effectiveness e

  11. Single valueIAQ indicatorsEv and ε • Contaminant removal effectiveness (e) concentration at exhaust average contaminant concentration Contamination level 2. Air-change efficiency (Ev) shortest time for replacing the air average of local values of age of air Air freshness

  12. Depends only on airflow pattern in a room We need to calculate age of air (t) Average time of exchange What is the age of air at the exhaust? Type of flow Perfect mixing Piston (unidirectional) flow Flow with stagnation and short-circuiting flow Air-change efficiency (Ev)

  13. Air exchange efficiency for characteristic room ventilation flow types

  14. Contaminant removal effectiveness (e) • Depends on: • position of a contaminant source • Airflow in the room • Questions 1) Is the concentration of pollutant in the room with stratified flow larger or smaller that the concentration with perfect mixing? 2) How to find the concentration at exhaust of the room?

  15. Ev= 0.41 e= 0.19 e= 2.20 Differences and similarities of Evande Depending on the source position: - similar or - completely different air quality

  16. Thermal comfort Temperature and relative humidity

  17. Thermal comfort Velocity Can create draft Draft is related to air temperature, air velocity, and turbulence intensity.

  18. Thermal comfort Mean radiant temperature potential problems Asymmetry Warm ceiling (----) Cool wall (---) Cool ceiling (--) Warm wall (-)

  19. Prediction of thermal comfort Predicted Mean Vote (PMV) + 3 hot + 2 warm + 1 slightly warm PMV = 0 neutral -1 slightly cool -2 cool -3 cold PMV = [0.303 exp ( -0.036 M ) + 0.028 ] L L - Thermal load on the body L = Internal heat production – heat loss to the actual environment L = M - W - [( Csk + Rsk + Esk ) + ( Cres + Eres )] Predicted Percentage Dissatisfied (PPD) PPD = 100 - 95 exp [ - (0.03353 PMV4 + 0.2179 PMV2)] Empirical correlations Ole Fanger Further Details: ANSI/ASHRAE standard 55, ISO standard 7730

More Related