1 / 15

FANCOILS CONTROLS ELECTRONIC BOARD - KCMS CMS - KCMS/PCM CMSPCM NEW WIRED CONTROL PANEL - KPCM

FANCOILS CONTROLS ELECTRONIC BOARD - KCMS CMS - KCMS/PCM CMSPCM NEW WIRED CONTROL PANEL - KPCM. FUNCTIONS. CONTROLLI. CONTROLLI. IDROWALL. FREND. KICM. KTCM. KPCM. NEW. YARDYEV. IDROWALL FREND BRIOEV UTNC-EV. BRIOEV. UTNC-EV. UTNB. UTNA. CONTROLS. CMS KCMS. CMSPCM KCMS/PCM.

leonard-alvarado
Download Presentation

FANCOILS CONTROLS ELECTRONIC BOARD - KCMS CMS - KCMS/PCM CMSPCM NEW WIRED CONTROL PANEL - KPCM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FANCOILS CONTROLSELECTRONIC BOARD - KCMS CMS - KCMS/PCM CMSPCMNEW WIRED CONTROL PANEL- KPCM

  2. FUNCTIONS

  3. CONTROLLI CONTROLLI IDROWALL FREND KICM KTCM KPCM NEW YARDYEV IDROWALL FREND BRIOEV UTNC-EV BRIOEV UTNC-EV UTNB UTNA

  4. CONTROLS CMS KCMS CMSPCM KCMS/PCM KICM KPCM KTCM RI-KRI STIKSTI MVRKMVR

  5. CONTROLS New codes for electrical board and panel CMSPCM KCMS/PCM CMS KCMS KPCM

  6. New electronic board KCMS CMS • SCR ECO digital input don’t change, SIC EIR change their position • New digital input DI5 (not available for Frend and Idrowall) for new function: • OCCUPANCY function (NC) only for KICM panel, (by modifying board parameters (P45=8;P93=3) trough installer password on the KPCM control panel) NEW OLD mario

  7. NEW NEW New electronic board KCMS CMS • New digital output CCH CCA OLD OLD

  8. FUNCTIONS SETTING FUNCTIONS COMFORT FUNCTIONS

  9. FUNCTIONS KICM KPCM KTCM • NOVELTY • Full AUTO: the desired temperature is showed on the display. The unit, according to the room temperature and the setting temperature, sets the working mode (cool/heat). User set temperature Legend mode room temperature HEAT OFF COOL P02=2°C P03=2°C P04=0,5°C P04=0,5°C

  10. FUNCTIONS KICM KPCM KTCM • ATTENTION • The following functions aren’t available with KICM control panel: • Orienting/swing - Clock - Timer - Continuous ventilation (by key) – Keybord stop • Probe IN/OUT function is available for: • KICM trough DIP SWITCH (DIP6) setting • KPCM trough key on the panel • Not used with the remote control KTCM (the probe is always set in the unit) • The periodic ventilation is always disabled with KPCM and KICM with Probe In function activated (probe into the unit) • Confort control (by modifying board parameters P36=1 trough installer password on the KPCM control panel).

  11. COMFORT CONTROL FUNCTION Comfort control (by parameters) When the set-point is decided by a system manager (supervision), the Comfort Control function gives the possibility to increase or reduce the Set-point (+-3°C) in the room with the UP-DOWN bottoms. (The function have to be enable modifying board parameters P36=1 trough installer password on the KPCM control panel.) The set value is 22 °C 22°C User set temperature Legend mode room temperature HEAT OFF COOL P02=2°C P03=2°C P04=0,5°C P04=0,5°C

  12. LOCK FUNCTION FUNCTION Attention: to obtain the changing set-point ±3°C must be set the Confort Control Function

  13. DIP-SWITCHES • Changes to the DIP-Switches must be made with the board disconnected from the power supply. • The DIP-Switches on the electronic board (see right figure) can be changed using a sharp tool. The DIP-Switches can be changed correctly by following the instructions present on the component and in the following table. OLD NEW

  14. DIGITAL OUTPUT: FUNCTION CCH Chiller input, chilled water required from the thermostat (NO) CCH –Chiller input

  15. DIGITAL OUTPUT: FUNCTION CCA Boiler input, hot water required from the thermostat (NO) CCA – Boiler input

More Related