80 likes | 406 Views
Supervisory Safety Leadership Best Safety Practice # 9. Identifying Job Hazards And PPE requirements. Can you identify the hazardous condition in this picture? Identify the hazardous conditions below. Can you identify any other hazards in this picture?.
E N D
Supervisory Safety Leadership Best Safety Practice # 9 Identifying Job Hazards And PPE requirements
Can you identify the hazardous condition in this picture?Identify the hazardous conditions below
Can you identify any other hazards in this picture? That’s one ! This wet work surface is a hazard!
Can you identify any other hazards in this picture?Name any other hazardous conditions below
Yes, 2 more ! These cables and other items laying around are trip hazards and must be removed before work begins.
Supervisory Safety Leadership Performing a JSA (Example) SEQUENCE OF JOB STEPS POTENTIAL HAZARDS SAFE JOB PROCEDURE 1. Place the ladder in proper position 1. Falls from the ladder • Make sure base of ladder is stable. Get some-one to hold the ladder to insure stability 2. Step up on ladder 2. Falls from the ladder • Maintain balance by • holding onto back of • ladder. Step up on • ladder one rung at a time. • Retrieve item from • stock shelve • Slipping from ladder • Dropping stock item 3. Maintain firm grip on ladder while reaching item with other hand. Do not over-extend/reach. 4. Step down from ladder • Slipping or falling • from ladder • Step down slowly. If • necessary hand item to another person. Move • down one rung at a • time. Maintain balance.
Supervisor Best Safety Practice # Defined Personal Protective Equipment (PPE) per task • Review jobs and hazards with your employees • Establish what PPE is required for routine jobs • Over time, develop establish, post, and communicate the “PPE Matrix” per job • Cover annually in training • “Expect the Unexpected” by anticipating hazards