420 likes | 973 Views
When to Use PCA. You have a set of p continuous variables.You want to repackage their variance into m components.You will usually want m to be < p, but not always.. Components and Variables. Each component is a weighted linear combination of the variablesEach variable is a weighted linear combination of the components..
E N D
1. Principal Components Analysis with SAS Karl L. Wuensch
Dept of Psychology
East Carolina University
3. Components and Variables Each component is a weighted linear combination of the variables
Each variable is a weighted linear combination of the components.
4. Factors and Variables In Factor Analysis, we exclude from the solution any variance that is unique, not shared by the variables.
Uj is the unique variance for Xj
5. Goals of PCA and FA Data reduction.
Discover and summarize pattern of intercorrelations among variables.
Test theory about the latent variables underlying a set a measurement variables.
Construct a test instrument.
There are many others uses of PCA and FA.
6. Data Reduction Ossenkopp and Mazmanian (Physiology and Behavior, 34: 935-941).
19 behavioral and physiological variables.
A single criterion variable, physiological response to four hours of cold-restraint
Extracted five factors.
Used multiple regression to develop a multiple regression model for predicting the criterion from the five factors.
7. Exploratory Factor Analysis Want to discover the pattern of intercorrleations among variables.
Wilt et al., 2005 (thesis).
Variables are items on the SOIS at ECU.
Found two factors, one evaluative, one on difficulty of course.
Compared FTF students to DE students, on structure and means.
8. Confirmatory Factor Analysis Have a theory regarding the factor structure for a set of variables.
Want to confirm that the theory describes the observed intercorrelations well.
Thurstone: Intelligence consists of seven independent factors rather than one global factor.
9. Construct Test Instrument Write a large set of items designed to test the constructs of interest.
Administer the survey to a sample of persons from the target population.
Use FA to help select those items that will be used to measure each of the constructs of interest.
Use Cronbach’s alpha to check reliability of resulting scales.
10. An Unusual Use of PCA Poulson, Braithwaite, Brondino, and Wuensch (1997, Journal of Social Behavior and Personality, 12, 743-758).
Simulated jury trial, seemingly insane defendant killed a man.
Criterion variable = recommended verdict
Guilty
Guilty But Mentally Ill
Not Guilty By Reason of Insanity.
11. Predictor variables = jurors’ scores on 8 scales.
Discriminant function analysis.
Problem with multicollinearity.
Used PCA to extract eight orthogonal components.
Predicted recommended verdict from these 8 components.
Transformed results back to the original scales.
12. A Simple, Contrived Example Consumers rate importance of seven characteristics of beer.
low Cost
high Size of bottle
high Alcohol content
Reputation of brand
Color
Aroma
Taste
13. PCA-Beer.sas Download PCA-Beer.sas from http://core.ecu.edu/psyc/wuenschk/SAS/SAS-Programs.htm .
Bring it into SAS.
Run the program. Look at the output.
14. Checking for Unique Variables 1 Check the correlation matrix (page 1 of output).
If there are any variables not well correlated with some others, might as well delete them.
Or add more variables expected to be correlated with them.
Can still include deleted variables in post-PCA analysis.
15. Checking for Unique Variables 2 Correlation Matrix
cost size alcohol reputat color aroma taste
cost 1.00 .832 .767 -.406 .018 -.046 -.064
size .832 1.00 .904 -.392 .179 .098 .026
alcohol .767 .904 1.00 -.463 .072 .044 .012
reputat -.406 -.392 -.463 1.00 -.372 -.443 -.443
color .018 .179 .072 -.372 1.00 .909 .903
aroma -.046 .098 .044 -.443 .909 1.00 .870
taste -.064 .026 .012 -.443 .903 .870 1.00
16. Checking for Unique Variables 3 For each variable, check R2 between it and the remaining variables. You will see these when we cover factor analysis.
Look at partial correlations – variables with large partial correlations share variance with one another but not with the remaining variables – this is problematic.
See page 2 of the output.
17. Checking for Unique Variables 4 Kaiser’s MSA will tell you, for each variable, how much of this problem exists.
The smaller the MSA, the greater the problem.
An MSA of .9 is marvelous, .5 miserable.
See page 2 of the output.
Typically we would have more than seven variables, and MSA would be likely be larger.
18. Extracting Principal Components 1 From p variables we can extract p components.
Each of p eigenvalues represents the amount of standardized variance that has been captured by one component.
The first component accounts for the largest possible amount of variance.
The second captures as much as possible of what is left over, and so on.
Each is orthogonal to the others.
19. Extracting Principal Components 2 Each variable has standardized variance = 1.
The total standardized variance in the p variables = p.
The sum of the m = p eigenvalues = p.
All of the variance is extracted.
For each component, the proportion of variance extracted = eigenvalue / p.
20. Extracting Principal Components 3 For our beer data, here are the eigenvalues and proportions of variance for the seven components:
21. How Many Components to Retain From p variables we can extract p components.
We probably want fewer than p.
Simple rule: Keep as many as have eigenvalues ? 1.
A component with eigenvalue < 1 captured less than one variable’s worth of variance.
22. Visual Aid: Use a Scree Plot
Scree is rubble at base of cliff.
See page 3 of the output.
23. Only the first two components have eigenvalues greater than 1.
Big drop in eigenvalue between component 2 and component 3.
Components 3-7 are scree.
By default, SAS will retain all components with eigenvalues of 1 or more.
Should also look at a solution with one fewer component and one with one more component.
24. Loadings, Unrotated and Rotated Loading matrix = factor pattern matrix = component matrix.
Each loading is the Pearson r between one variable and one component.
Since the components are orthogonal, each loading is also a ß weight from predicting X from the components.
Here are the unrotated loadings for our 2 component solution:
25. Factor Pattern Matrix
26. Pre-Rotation Loadings All variables load well on first component, economy and quality vs. reputation.
Second component is more interesting, economy versus quality.
See page 4 of the output.
27.
See the preplot on page 5 of output.
28. Rotate the Axes Rotate these axes so that the two dimensions pass more nearly through the two major clusters (COST, SIZE, ALCH and COLOR, AROMA, TASTE).
The number of degrees by which I rotate the axes is the angle PSI. For these data, rotating the axes -40.63 degrees has the desired effect.
29. Loadings After Rotation
30. Components After Rotation Component 1 = Quality versus reputation.
Component 2 = Economy (or cheap drunk) versus reputation.
Page 6 of output.
31.
See the postplot on page 7 of the output.
32. Number of Components in the Rotated Solution Try extracting one fewer component, try one more component.
Which produces the more sensible solution?
Error = difference in obtained structure and true structure.
Overextraction (too many components) produces less error than underextraction.
If there is only one true factor and no unique variables, can get “factor splitting.”
33. In this case, first unrotated factor ? true factor.
But rotation splits the factor, producing an imaginary second factor and corrupting the first.
Can avoid this problem by including a garbage variable that will be removed prior to the final solution.
34. Explained Variance Square the loadings and then sum them across variables.
Get, for each component, the amount of variance explained.
Prior to rotation, these are eigenvalues.
Our SAS output shows the SSL for each component on page 6, just below the rotated factor pattern.
35.
After rotation the two components together account for (3.02 + 2.91) / 7 = 85% of the total variance. If the last component has a small SSL, one should consider dropping it.
If SSL = 1, the component has extracted one variable’s worth of variance.
If only one variable loads well on a component, the component is not well defined.
If only two load well, it may be reliable, if the two variables are highly correlated with one another but not with other variables.
36. Naming Components For each component, look at how it is correlated with the variables.
Try to name the construct represented by that factor.
If you cannot, perhaps you should try a different solution.
I have named our components “aesthetic quality” and “cheap drunk.”
37. Communalities For each variable, sum the squared loadings across components.
This gives you the R2 for predicting the variable from the components,
which is the proportion of the variable’s variance which has been extracted by the components.
See page 4 of the output.
39. Orthogonal Rotations Varimax -- minimize the complexity of the components by making the large loadings larger and the small loadings smaller within each component.
Quartimax -- makes large loadings larger and small loadings smaller within each variable.
Equamax – a compromize between these two.
40. Oblique Rotations Axes drawn through the two clusters in the upper right quadrant would not be perpendicular.
41. May better fit the data with axes that are not perpendicular, but at the cost of having components that are correlated with one another.
More on this later.