1 / 3

Assembling MAVEN Purge Fittings

Assembling MAVEN Purge Fittings. Paul Turin 7/17/12. To install: Fitting must be disassembled to install hose – do not try to just stick hose in end of assembly Slide parts on ¼” T eflon purge hose in order and with orientations shown below

linh
Download Presentation

Assembling MAVEN Purge Fittings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AssemblingMAVENPurge Fittings Paul Turin 7/17/12

  2. To install: • Fitting must be disassembled to install hose – do not try to just stick hose in end of assembly • Slide parts on ¼” Teflon purge hose in order and with orientations shown below • Note direction of bevels on ferrule and clamp – these MUST face correct directions – away from each other • Insert tubing into fitting until it bottoms out • Slide ferruleand clamp against fitting • Screw nut on, being careful not to cross thread • Tighten firmly by hand – do not use pliers Ferrule (opaque white) Split clamp Nut Fitting Bevel

  3. To remove: • Fitting must be disassembled for removal – split clamp bites into tubing • Slide components off of tubing – you may have to spread the split clamp slightly • Reassemble cones and nut in correct order onto fitting – DO NOT TIGHTEN

More Related