1 / 15

How Plotter4u Refurbish HP Plotters

How Plotter4u Refurbish HP Plotters. A step by step pictured tour of the process of refurbishment. Our Mission. To give the best product, to every customer by refurbishing our plotters as close to factory specs as possible, and to surpass our customers expectations. The Process.

linore
Download Presentation

How Plotter4u Refurbish HP Plotters

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How Plotter4u Refurbish HP Plotters A step by step pictured tour of the process of refurbishment www.plotter4u.com

  2. Our Mission To give the best product, to every customer by refurbishing our plotters as close to factory specs as possible, and to surpass our customers expectations. www.plotter4u.com

  3. The Process • The process of refurbishing a Hewlett Packard plotter takes approximately 2 to 4 hours per unit, sometimes even a full day. It is our belief that we do it right the first time, so our customers can have a plotter that will serve them years to come. The following is a pictured guide on that process. We want you to see what every plotter goes through, so that you know what quality time and effort goes into each and everyone of the plotters we ship out. So you have the confidence of knowing you have a great product. www.plotter4u.com

  4. Step 1 • We start by disassembling the plotter, including the belt, spit tune, carriage, encoder strip, and ink capping station. www.plotter4u.com

  5. Step 2 • We check the roller for nicks and ware spots that might impede the operation of the paper advancement. www.plotter4u.com

  6. Step 3 • We take the carriage off and check the belt for wear and tear, we also check the motor for any rubber residue, if this is not removed, it can wear the belt quicker. The one pictured doesn’t have any residue on it. www.plotter4u.com

  7. Step 4 • Next we clean the area behind the carriage and make sure there is no dust or residue from previous use. www.plotter4u.com

  8. Step 5 • We remove the ink capping station to clean the wipers and the cartridge vacuum area. The wipers act like the wipers on a car, they remove the residue during plotting to keep the cartridges clean. www.plotter4u.com

  9. Step 6 • We check the carriage contacts for wear, if it fails our test via the plotter, we replace the carriage. www.plotter4u.com

  10. Step 7 • We then carefully put a new belt on with the carriage, ensuring that it is put on correctly is very important. www.plotter4u.com

  11. Step 8 • We now start to reassemble the plotter, piece by piece. www.plotter4u.com

  12. Step 9 • We start to run the diagnostic tests, and calibration test on the plotter to make sure that all components are calibrated and working up to Hewlett Packard specifications. www.plotter4u.com

  13. Step 10 – Reassembling the casing www.plotter4u.com

  14. Step 11 • Completely clean the outside of the unit for great presentation. Removing as much adhesive and ink build up as possible. www.plotter4u.com

  15. Step 12 – Get ready to ship the unit www.plotter4u.com

More Related