230 likes | 555 Views
VOLTAGE. Remember. One coulomb is the charge equal to the charge of 6.25 X 10 18 electrons Unit of charge (C) 1 ampere =1 coulomb per sec Unit of electric current (I) Voltage= the push/force behind electrons. Voltage. Voltage is the force that moves electric charges in a circuit.
E N D
Remember.. • One coulomb is the charge equal to the charge of 6.25 X 1018 electrons • Unit of charge (C) • 1 ampere =1 coulomb per sec • Unit of electric current (I) • Voltage= the push/force behind electrons
Voltage • Voltage is the force that moves electric charges in a circuit. • Voltage drop/potential difference: The difference in the amount of voltage between two points in a circuit • Things that make voltage drop include anything that uses energy like LOADS or other RESISTORS
Electric potential (also referred to as voltage) • is the energy given to each electron by the energy source. It is the potential energy that the electron leaving the energy source contains. • This energy is then transferred to one or more electric loads that convert the energy to another form. The electric potential is measured in the SI unit called volts.
Voltage/potential difference • Measure in volts (v) • Measured using a voltmeter • A voltmeter is always connected in PARALLEL around a LOAD, to measure the change in voltage. • Positive side of the voltmeter is connected to the positive end of the circuit and the negative side is connected to the negative terminal
Circuit diagrams • A voltmeter is the device that measures the amount of potential energy used by an object in a circuit • The voltmeter has two outlets. The red outlet is the positive end and the black outlet is the negative end. To use a voltmeter, two wires are connected from each of its plugs and the wires are connected around the object that is being tested. V
Potential Energy • Electric potential energy is the electrical energy stored in a battery • All forms of energy are measured in joules (J). • When describing energy of electrons in a circuit, we talk about the potential energy per coulomb of charge.
Potential energy • Think of electric potential as stored energy that can be used to do work, much like water that drives a water wheel or a turbine in a generator. Water in jug has the potential to do work….like move the wheel!
Top of the hill is the max potential energy 100J • As electrons flow through the circuit energy is lost Cell reaction Doing work
Potential Difference (voltage) • The difference in potential energy per unit of charge (coulomb) measured at two points • Ex. The difference of 25J/coulomb = 25volts Voltmeter measures at 2 points to find the difference in voltage; potential difference
Potential Difference= 25V Uses 25V Uses 25J/coulomb How much work can be done here 100V How much work can be done here 75 V vs.
Formula: Voltage • Potential difference (v) = __________________________________________ potential energy (J) Charge (C) V= E/Q
Example 1 • If a wall outlet provide 300J of electric energy and there is 28C of charge, what is the potential difference between the negative and positive end of the socket? G: E= 300J; Q=28C R: V= ? A: V=E/Q =300J/28C S: =10.7V S: Therefore, the wall socket provide 10.7V.
Example2 2. If the potential difference across a battery is 1.5V and provides 30J of energy, what is the amount of charge? G: E= 30J; V=1.5V R: Q= ? A: V=E/Q Q= E/V =30J/1.5V S: =20C S: Therefore, there are 20C of charge
Example 3 3. How many joules of energy are produced when there is a potential difference of 106V and 46C of charge? G: V= 106V; Q=46C R: E= ? A: V=E/Q E=QV = (46C)(106V) S: = 4876 J S: Therefore, 4876 J are produced.
Overall…. • A current is the movement of electrons • In order to move our electrons we need to build up energy (through chemical reactions that cause charge separation and the electric field.) • That build up is called potential energy and voltage is the difference in energy/coulomb • Voltage is measured in volts • In order for a circuit to continue, electrons that left the negative terminal must return to the positive terminal of the power source to complete the circuit