1 / 8

16 th Edition Testing FAQ

16 th Edition Testing FAQ. Common Issues With 16 th Edition Testing. 16 th Edition Testing FAQ RCD Current. RCD Current Reads Incorrectly 1. Please note that RCD current specifications are always positive and when writing a procedure this must be taken into account.

lorand
Download Presentation

16 th Edition Testing FAQ

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 16th Edition Testing FAQ Common Issues With 16th Edition Testing

  2. 16th Edition Testing FAQRCD Current • RCD Current Reads Incorrectly1. Please note that RCD current specifications are always positiveand when writing a procedure this must be taken into account. e.g. 100mA range spec. –0% +10% This means the current will be between 100mA and 110mA to write this into a ProCal procedure, the nominal test value should be 105mA ± 5%

  3. 16th Edition Testing FAQRCD Current • Does mains voltage affect RCD current?YES! Many of the older RCD testers are affected by mains voltage. • Solution1. Use a variable voltage mains transformer and set the voltage to the same as the calibrated voltage of the RCD tester.2. Use a formula in ProEdit to compensate for the different in mains voltage.

  4. 16th Edition Testing FAQ5I Testing • 5I Test Does Not WorkMost testers can only work on 5I with a time interval less than 40ms • SolutionSet the 2100 to an RCD time interval of less that 40ms

  5. 16th Edition Testing FAQUncertainty Statements • Uncertainty Statements Do Not Appear On My CertificateProEdit procedures requires a reference to a specific uncertainty statement line (up to 10 can be selected) • SolutionCheck the procedure has a valid uncertainty statement selected, and also check the uncertainty statements using the ProEdit Uncertainty Statements Editor.

  6. 16th Edition Testing FAQInsulation Test Voltage • Insulation Test Voltage Does Not MeasureSome testers output the insulation test voltage, with positive on the black lead. • SolutionReverse the test lead connections to the 2100 terminals

  7. 16th Edition Testing FAQSelecting Test Points • How Do I Select Which Test Points To Use?As a general rule, 3 test points should be used on a range / function covering low, mid and high points of the range.

  8. 16th Edition Testing FAQInformation Resources • Where Can I Find Answers To Common Usability Issues?The Transmille Web Site contains FAQs for the 2100 which includes application notes with details on how to resolve common issues.

More Related