1 / 3

B t =3000hz R=0.25 R b =? R b =(2/1+r)*B t R b = (2/1+0.25)*3000=6000/1.25 pulse/sec

.Compare bipolar and ON-OFF line codes in terms of spectrum efficiency, transperancy , error detection and timing. · Determine the pulse transmission rate if the transmission bandwidth is 3000Hz and the roll-off factor used for Nyquist criterion is 25%. B t =3000hz R=0.25 R b =?

louis-albert
Download Presentation

B t =3000hz R=0.25 R b =? R b =(2/1+r)*B t R b = (2/1+0.25)*3000=6000/1.25 pulse/sec

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. .Compare bipolar and ON-OFF line codes in terms of spectrum efficiency, transperancy, error detection and timing

  2. · Determine the pulse transmission rate if the transmission bandwidth is 3000Hz and the roll-off factor used for Nyquist criterion is 25%. • Bt=3000hz • R=0.25 • Rb=? • Rb=(2/1+r)*Bt • Rb= (2/1+0.25)*3000=6000/1.25 pulse/sec

  3. · If a peak pulse amplitude A p=2 milli-volt and the channel noise rms value = 192.3 micro-volt. If threshold detection is used and 1 and 0 are equally likely. Find the detection error probability for : Polar signaling On-Off Bipolar • Polar P(E)=Q(2*10^-3\192.3*10^-6) • On-off P(E)=Q(2*10^-3\2*192.3*10^-6) • Bipolar P(E)=1.5*Q(2*10^-3\192.3*10^-6)

More Related