1 / 6

JN0-648 Exam PDF | 2020 JN0-648 Questions Answers | Dumpsforsure

Juniper JN0-648 DUMPS PDF: https://www.dumpsforsure.com/juniper/jn0-648-dumps.html<br> <br>With the introduction of the JN0-648 exam dumps. It was considered a very difficult exam because of its extensive course outline. But now it is not so difficult if you prepare yourself from the JN0-648 dumps pdf. It is the most reliable material available for preparation. You can simply ace your exam with the help of this study material.Dumpsforsure has achieved a high status among students as an exam study material provider. It gives you an idea of the actual configuration of the exam.

lucasjames
Download Presentation

JN0-648 Exam PDF | 2020 JN0-648 Questions Answers | Dumpsforsure

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Juniper JN0-648 Enterprise Routing and Switching Professional (JNCIP-ENT) https://www.dumpsforsure.com/juniper/jn0-648-dumps.html

  2. Question: 1 When redistributing IGP routes into BGP. what information .s used by default on Junos platforms to determine the BGP route's MED attribute value? A. routing information base B. the IGP route preference C. the IGP Metric D. route protocol source Answer: C Question: 2 Exhibit. Referring to the exhibit, which TTL value will be sent to the LLDP neighbors? A. 120 seconds B. 200 seconds C. 400 seconds D. 90 seconds

  3. Answer: A Question: 3 Exhibit. You are authenticating user devices connected to your ex Series switch. You have 802.1X and MAC RADIUS configured for all ports A user is complaining about the time it takes to connect their non- 802.1X device on ge-0/0/15 using MAC RADIUS authentication Referring to the exhibit, what should be done to accelerate the authentication process? A. Change the supplicant mode to multiple on ge-0/0/15 B. Configure the no-reauthentication feature for 802.1X on ge-0/0/15 C. Configure the restrict feature for MAC RADIUS on ge-0/0/15. D. Change the 802.1X retry attempts value to 5 on ge-0/0/15 Answer: A Question: 4 You will to route Layer 3 PVLAN traffic within the secondary VLAN. What is required to accomplish this task?

  4. A. a community VIAN B. an IRB C. an FBF policy D. an isolated VLAN Answer: B Question: 5 You are designing a multicast topology to support IPv4 IPTV broadcasts in your organization. The design should support multiple multicast senders with overlapping group addresses while preventing interference between them. Client devices currently do not support IGMPv3. Which approach would fulfill these requirements? A. Implement PIM-SM and SSM with SSM maps to support IGMPv2 clients B. Implement bidirectional PIM C. Assign group addresses in the 224/4 range and implement PIM-DM D. Implement MLD Answer: C Question: 6 Exhibit.

  5. You are troubleshooting a route problem in the topology shown in the exhibit. The 10.30.0 0/24 route is not reachable from the R3 router. What would cause this problem? A. R3 does not have a route to the BGP next hop of 10.30.0.0/24 B. R4 is not advertising the 10.30.0.0/24 route to R3 C. R3 does not have an established BGP session with R4. D. R3 does not have an OSPF route for 10.30.0.0/24 Answer: A Question: 7 You are enabling MSTP in your Layer 2 network to prevent loops. In this scenario, which three parameters must match on all switches in the network? (Choose three. ) A. configuration name B. bridge priority C. MSTI-to-VLAN mapping D. max age E. revision level

  6. Answer: A, C, E Question: 8 Exhibit. Referring to the exhibit, a RMSM network is set up to enable communication between multicast devices. Which statement is true in this scenario? A. After the formation of the shortest-path tree, a join message is sent from R2 to R1. B. After the formation of the shortest-path tree, a join message is sent from R1 to R5 C. After the formation of the shortest-path tree, a prune message is sent from R1 to R2. D. After the formation of the shortest-path free, a prune message is sent from R1 to R5. Answer: C https://www.dumpsforsure.com/juniper/jn0-648-dumps.html

More Related