1 / 22

Basic Network Configuration for File

Basic Network Configuration for File. Upon completion of this module, you should be able to: Configure Data Mover network devices Implement DNS and Time Services. Basic Network Configuration for File. Lesson 1: Data Mover Network Devices.

lucian-thompson
Download Presentation

Basic Network Configuration for File

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Basic Network Configuration for File Upon completion of this module, you should be able to: Configure Data Mover network devices Implement DNS and Time Services Basic Network Configuration for File

  2. Basic Network Configuration for File Lesson 1: Data Mover Network Devices • During this lesson the following topics are covered: • Network device speed and duplex settings • IP interface for client access • Routing table Basic Network Configuration for File

  3. Modifying and Displaying Configuration Settings > Network > Settings For File Basic Network Configuration for File

  4. Listing Network Devices Settings > Network > Settings for File > Devices Basic Network Configuration for File

  5. Duplex & Transmission Speed • Duplex setting • Preferred setting is auto (Default) • Best practice setting is auto for GigE connections • Transmission Speed • Defaults to auto • Use maximum speed supported on the network between the VNX and the client Basic Network Configuration for File

  6. Setting Speed/Duplex Device Properties to set Speed/Duplex Basic Network Configuration for File

  7. IP Address Configuration • Interfaces tab > Create • Required Parameters • IP Address • Subnet mask • Broadcast address Basic Network Configuration for File

  8. Displaying IP Configuration Settings > Network > Settings For File > Interfaces Basic Network Configuration for File

  9. IPv6 Support • VNX supports IPv6 IP addresses • More addresses • Better security • Roll security into the protocol • IPv6 address example: 2620:0000:0170:0062:021B:D5FF:FE25:7082 Network Subnet Interface ID Basic Network Configuration for File

  10. Unisphere: Control Station IPv6 System > Control Station Properties Basic Network Configuration for File

  11. Data Mover Routing • Routing table of a Data Mover directs outgoing network traffic via, both external and internal gateways • Routes to a host • Routes to a network • Data Mover routing table can contain 3 types of routes • Directly connected • Static • Dynamic • Packet Reflect • Reply to network client requests • Route and ARP tables are not examined • No need to determine the route to send the reply packets Multiple Interfaces on a Network When more than one IP interface are on the same network, the first interface configured will be the default path out of the Data Mover. Example: Interface “A” iscreated on a Data Mover, then interface “B”. All resource queries (e.g. DNS) will go out through interface “A”. Basic Network Configuration for File

  12. Viewing Data Mover Routing Information Settings > Network > Settings For File > Routes Default Gateway: 0.0.0.0 Route to Network: 192.168.64.0 Basic Network Configuration for File

  13. Configure Default Gateway Basic Network Configuration for File

  14. Deleting Routes Basic Network Configuration for File

  15. Basic Network Configuration for File Lesson 1: Summary During this lesson the following topics were covered: Network device speed and duplex settings IP interface for client access Routing table Basic Network Configuration for File

  16. Basic Network Configuration for File Lesson 2: Implement DNS and Time Services • During this lesson the following topics are covered: • Data Mover DNS Configuration • Time Services (NTP and SNTP) • Implement Time Services for a Data Mover Basic Network Configuration for File

  17. Displaying DNS Settings • Settings > Network > Settings For File > DNS Basic Network Configuration for File

  18. Configuring a Data Mover for DNS Basic Network Configuration for File

  19. Time Services Overview • Data Mover NTP client • Synchronization of the system clock with an NTP or SNTP server • NTP • Sophisticated algorithms for time correction and maintenance to allow time synchronization with an accuracy of about a millisecond • SNTP • Subset of NTP for use in environments with less stringent synchronization and accuracy requirements • To the client, NTP or SNTP are indistinguishable Basic Network Configuration for File

  20. Initializing Time Services on a Data Mover • System > Hardware >Data Movers Basic Network Configuration for File

  21. Basic Network Configuration for File Lesson 2: Summary During this lesson the following topics were covered: Data Mover DNS Configuration Time Services (NTP and SNTP) Implement Time Services for a Data Mover Basic Network Configuration for File

  22. Module Summary Key points covered in this module: • Recommended Data Mover speed/duplex setting is 'auto' • Use Data Mover time services to synchronize with Windows and Unix/Linux environments Basic Network Configuration for File

More Related