1 / 10

ANSI Standard Guards Custom Equipment Guards Horizontal and Vertical Belt Guards

Uniguard Machine Guards. ANSI Standard Guards Custom Equipment Guards Horizontal and Vertical Belt Guards. ANSI Pump Guards .

lucita
Download Presentation

ANSI Standard Guards Custom Equipment Guards Horizontal and Vertical Belt Guards

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Uniguard Machine Guards • ANSI Standard Guards • Custom Equipment Guards • Horizontal and Vertical • Belt Guards

  2. ANSI Pump Guards • ANSI/OSHA Compliant - Nonmetallic guards will not dent or rust. Cantilevered guard bolts direct to rear of the pump and eliminates drilling base plates to mount guards. • ANSI Pumps Guards install in just a couple of minutes and can be removed and remounted in about two minutes. All Uniguard Machine Guards are UV Protected for outdoor use.

  3. GCU- Custom Guard CGU - Safer than metal guards, these rugged OSHA-compliant polyethylene guards are smooth-edged, electrically nonconductive, and have no mesh for fingers or tools to poke through. They come with warning labels and are safety orange in color (no painting required), so they're easy to spot. Perfect for corrosive and outdoor environments, guards have Type 304 stainless steel hardware and are chemical, corrosion, UV, and impact resistant. They feature OSHA-required enhanced end-caps They meet OSHA standard 29 CFR 1910.219 for rotating machinery. Each guard comes unassembled, allowing you to custom fit your application.

  4. Horizontal and Vertical Belt Guards Vertical Belt Machine Guards - Nonmetallic, lightweight guards won’t dent or rust and are UV protected against sunlight. Vertical Guards incorporate solid panels in the front and rear of the guard with a vertical split in the center of the guard. Shaft openings are located and field cut, usually with a hole saw. The belt guard easily slips over the equipment, maintaining guards OSHA/ANSI Compliance. Horizontal Belt Machine Guards - Nonmetallic, lightweight guards won’t dent or rust. They feature a removable back that slides into a channel incorporated into the main body of the guard. Front panel is nonmetallic as well and incorporates ventilation/viewing slots. Horizontal guards are OSHA/ANSI Compliant.

  5. Standard and Custom Sizes Uniguard Machine Guards will save you money by decreasing down time and make coupling maintenance less of an effort. They are easy to install, economical and allow for visual inspection of the rotating element without removing the guard.

  6. Specialty features Uniguard Seal Splash Guards prevent leaking seals from spraying the surrounding areas and potentially spraying toxic chemicals on nearby equipment or people. Uniguard Inspection Window is an access ports to view the coupling area and perform routine maintenance. It allows you to easily and safely view the coupling condition.

  7. Watch the Uniguard Hammer Test • http://www.youtube.com/watch?v=U41gLHW2z9Y

  8. Thank You!

More Related