1 / 10

A micro web server TAP controller application

A micro web server TAP controller application. J. M. Martins Ferreira FEUP / DEEC - Rua Dr. Roberto Frias 4200-537 Porto - PORTUGAL Tel. 351 225 081 748 / Fax: 351 225 081 443 (jmf@fe.up.pt / http://www.fe.up.pt/~jmf). Objectives.

luz
Download Presentation

A micro web server TAP controller application

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. A micro web server TAP controller application J. M. Martins Ferreira FEUP / DEEC - Rua Dr. Roberto Frias 4200-537 Porto - PORTUGAL Tel. 351 225 081 748 / Fax: 351 225 081 443 (jmf@fe.up.pt / http://www.fe.up.pt/~jmf)

  2. Objectives • To enable the students to write real test programs in SVF and to execute online • To provide a tool for test program validation • To facilitate hands-on sessions with real 1149.X hardware

  3. Outline • The test setup • The micro web server board • IP address and connections • The MWS-TAP application • Set IP address and connect • The SVF test program • Example

  4. Setup: The MWS board • The micro web server TAP controller application uses a DSTINIm400 networked microcontroller evaluation board (Maxim-Dallas) • The current prototype controls one BS chain

  5. TMS TDO TCK TDI MWS board: the JTAG pins

  6. Setup: IP and connections • Use the MWS RS232C connector and the MTK tool to program a valid IP address into the micro web server board • Use FTP to load the server application into the MWS board and Telnet to launch theserver process

  7. Set up (cont.) • If the current IP of the MWS is known, a quicker set up procedure is possible: • Connect the card directly to a computer using a regular LAN cable and telnet to its IP address • Set up the new IP address (cuts the current connection if in different subnets), e.g. ipconfig -a 158.36.164.12 -m 255.255.254.0 -g 158.36.164.1 • Set the current IP of the computer to the same subnet and reconnect (or use the LAN)

  8. MWS-TAP – set IP and connect

  9. MWS-TAP – Open / write a new SVF test program

  10. MWS-TAP – Example (demo board leds)

More Related